Digium E1 card stops working til disconnect machine power cord

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi there,

In one of my asterisk installation, there is a Digium E1 pri card connected.
The asterisk and card are working properly.
The problem we have is that when a storm occurs in the area, the card stops working, and E1 lines connected not rise, even restart the machine.
If however if you turn off the machine, disconnect the power cord, reattach it and turn on the machine again, E1 pri card correctly recognizes the E1 lines and the PBX starts to function properly.
This only happens when there are storms in the area.

Why is it necessary to disconnect the power cord for the card to work after a storm?
How I can identify where the problem is?
How I can fix it?

Thanks in advance,

Ismaeleitor.
-- 
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

[Index of Archives]     [Asterisk Announcements]     [Asterisk App Development]     [PJ SIP]     [Gnu Gatekeeper]     [IETF Sipping]     [Info Cyrus]     [ALSA User]     [Fedora Linux Users]     [Linux SCTP]     [DCCP]     [Gimp]     [Yosemite News]     [Deep Creek Hot Springs]     [Yosemite Campsites]     [ISDN Cause Codes]     [Asterisk Books]