GotoIf redirection to label not working correctly

[Noah Engelberth <Noah@xxxxxxxxxxxxxxxxxxxxxxx>]

I run a hotdesking system based on the example from Asterisk: The Definitive Guide.  Calls come into the [hotdesk] context, which verifies the phone has a logged in user and sends the call to users,${EXTEN},1 if there is a user logged in.  The [users] context then includes several other contexts for internal/external call handling, as follows:

 

[users]

include => internal

include => dummyextensions

 

switch => DUNDi/dundi-peer

 

Internal office calls should get caught by the include => internal, and run through the [internal] context as follows:

[internal]

exten => _3XX,1,NoOp()

same => n,Set(E=${EXTEN})

same => n,Set(${E}_VMCONTEXT=${HOTDESK_INFO(vmcontext,${E})})

same => n,Set(USER_LOCATION=${HOTDESK_USER_STATUS(${E})})

same => n,GotoIf($[${ODBCROWS} < 1]?notloggedin)

same => n,Dial(SIP/${USER_LOCATION},20,wWU(blf-begincall^${E}^INUSE)b(blf-begincall^s^1(${E}^RINGING)))

same => n,Voicemail(${E}@${${E}_VMCONTEXT},b)

same => n,Hangup()

same => n(notloggedin),Set(LOGGED_OFF=1)

same => n,Voicemail(${E}@${${E}_VMCONTEXT},u)

same => n,Hangup()

 

In both Asterisk 10 and Asterisk 11, the GotoIf does not work under the circumstances above, giving me the following error and hanging up the call:

 

[Aug 23 15:17:35] WARNING[3558][C-00000565]: pbx.c:11799 pbx_parseable_goto: Priority 'notloggedin' must be a number > 0, or valid label

 

I can work around the issue with any of the following:

-          Change the GotoIf to point to internal,${EXTEN},notloggedin

-          Change the GotoIf to point to 9

-          Comment out the DUNDi switch in [users]

-          Unload the pbx_dundi.so module

 

In the latter two cases, the call redirects to the notloggedin priority label within [internal],${EXTEN} without me changing the GotoIf – as long as the DUNDi switch is not active in [users].  With the DUNDi switch active, I get the warning message above and the call hangs up.

 

Is there something I’m doing wrong in my config?  Is this basically expected behavior that I need to adjust around?

 

Thank you,

 

Noah Engelberth

MetaLINK Technologies

 

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users