local vs remote bridging: no audio

[sean darcy <seandarcy2@xxxxxxxxx>]

Calling into 10.5.0-rc2 from a pstn did provider, I get no audio:

    -- Executing [111@from-teliax:1] Dial("SIP/teliax-00000010", 
"SIP/office2/+1<number>") in new stack
  == Using SIP RTP TOS bits 184
  == Using SIP RTP CoS mark 5
    -- Called SIP/office2/+1<number>
    -- SIP/office2-00000011 answered SIP/teliax-00000010
    -- Locally bridging SIP/teliax-00000010 and SIP/office2-00000011

But if I call in over sip from outside with the same number and channel 
all works fine:

    -- Executing [111@from_11hidden:1] 
Dial("SIP/office_incoming-00000012", "SIP/office2/+1<same_number>") in 
new stack
  == Using SIP RTP TOS bits 184
  == Using SIP RTP CoS mark 5
    -- Called SIP/office2/+1<same_number>
    -- SIP/office2-00000013 answered SIP/office_incoming-00000012
    -- Remotely bridging SIP/office_incoming-00000012 and 
SIP/teliax2-00000013

The only difference I can see is Locally vs. Remotely bridging.

sip.conf

nat=yes
directmedia=nonat

Any suggestions appreciated.

sean


--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
              http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users