Re: Set SIP peer state busy

["Danny Nicholas" <danny@xxxxxxxxxxx>]

Two "hammer" options you could use - #1 use the sip notify to periodically
reset the phone #2 set up a dialplan snippet to change the credentials of
the peer and do a sip reload so it is disabled. (of course you would need a
corresponding snippet to re-enable the phone).

-----Original Message-----
From: asterisk-users-bounces@xxxxxxxxxxxxxxxx
[mailto:asterisk-users-bounces@xxxxxxxxxxxxxxxx] On Behalf Of Benny Amorsen
Sent: Thursday, April 26, 2012 8:41 AM
To: asterisk-users@xxxxxxxxxxxxxxxx
Subject: Re:  Set SIP peer state busy

Jonas Kellens <jonas.kellens@xxxxxxxxxx> writes:

> I know you can do this by pressing "DND" on your IP-phone, but can 
> this state also be set in the dialplan ?

You cannot actually achieve this by pressing "DND" on your IP-phone. All
that will accomplish is that the phone answers all calls with "busy", but
Asterisk will keep bombarding it with calls if it happens to be member of a
queue. This can be detrimental to the health of the Asterisk-server.


/Benny



--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to
Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users