DAHDI inter-digit timeout = 0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Greets--

I've had an old server die on me, it was installed by someone else then never maintained.  It runs some old version of Elastix on top of Asterisk 1.4.33 with 4x Digium T100P cards.  I swapped all the parts into a referb of the same gear and it runs great, but I want to put it in a completely new box.  The OS on the old drives was too old to talk to the embedded chipset in the new server so I installed whatever version of Elastix was in the current production repo (Asterisk 1.8.7) and rebuilt the configs from the ground up to utilize a new Digium T420P...

Long story short, this is the first time I've worked with hardware cards, so I obviously missed something.  When a line is picked up, I get dial tone but it immediately goes to a busy signal after the first digit is pressed.  I get the same result when I use the new T420P and an old T100P.  The log below was generated when I hit 8, three times, as quickly as possible. It's only seeing the first 8 then dumps that 8 to extension 'stations' which has no '8', thus the busy signal. "timeout = 0" is my only lead.  Set(TIMEOUT(digits)=X) has no affect since the timeout occurs before the call hits the dialplan context, so methinks the issue lies elsewhere.  Four hours in, my forehead raw from being smashed against hard surfaces, said "elsewhere" has eluded me...  Suggestions?  I'm looking for a slap to the face and a finger pointing to my stupid oversight.  RTFM + intertubes have failed me (or I them)

DEBUG[5785] chan_dahdi.c: Monitor doohicky got event Ring/Answered on channel 5
DEBUG[5785] sig_analog.c: channel (5) - signaling (2) - event (ANALOG_EVENT_RINGOFFHOOK)
DEBUG[5785] dsp.c: Setup tone 1100 Hz, 500 ms, block_size=160, hits_required=21
DEBUG[5785] dsp.c: Setup tone 2100 Hz, 2600 ms, block_size=160, hits_required=116
DEBUG[19988] sig_analog.c: __analog_ss_thread 5
VERBOSE[19988] sig_analog.c:     -- Starting simple switch on 'DAHDI/5-1'
DEBUG[5757] devicestate.c: No provider found, checking channel drivers for DAHDI - 5
DEBUG[5757] devicestate.c: Changing state for DAHDI/5 - state 2 (In use)
DEBUG[5757] devicestate.c: device 'DAHDI/5' state '2'
DEBUG[19988] sig_analog.c: Begin DTMF digit: 0x38 '8' on DAHDI/5-1
DEBUG[19988] chan_dahdi.c: Begin DTMF digit: 0x38 '8' on DAHDI/5-1
DEBUG[19988] sig_analog.c: End DTMF digit: 0x38 '8' on DAHDI/5-1
DEBUG[19988] chan_dahdi.c: End DTMF digit: 0x38 '8' on DAHDI/5-1
DEBUG[19988] sig_analog.c: waitfordigit returned '8' (56), timeout = 0
DEBUG[19988] sig_analog.c: Can't match 8 from '1505' in context stations
DEBUG[19988] channel.c: Hanging up channel 'DAHDI/5-1'
DEBUG[19988] chan_dahdi.c: dahdi_hangup(DAHDI/5-1)
DEBUG[19988] sig_analog.c: analog_hangup 5
DEBUG[19988] sig_analog.c: Hangup: channel: 5 index = 0, normal = 1, callwait = 0, thirdcall = 0
DEBUG[19988] chan_dahdi.c: Set option TONE VERIFY, mode: OFF(0) on DAHDI/5-1
DEBUG[19988] chan_dahdi.c: Set option TDD MODE, value: OFF(0) on DAHDI/5-1
DEBUG[19988] sig_analog.c: Updated conferencing on 5, with 0 conference users
VERBOSE[19988] sig_analog.c:     -- Hanging up on 'DAHDI/5-1'
VERBOSE[19988] chan_dahdi.c:     -- Hungup 'DAHDI/5-1'

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


[Gnu Gatekeeper]     [IETF Sipping]     [Info Cyrus]     [ALSA User]     [Fedora Linux Users]     [DCCP]     [Gimp]     [100% Free Online Dating]     [Yosemite News]     [Arts & Crafts]     [Yosemite Photos]     [Deep Creek Hot Springs]     [Yosemite Campsites]     [ISDN Cause Codes]


Add to Google Powered by Linux