Linux ARM, Xscale -- IDE driver for ARM


IDE driver for ARM
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

To: linux-arm@xxxxxxxxxxxxxxxxxxx
Subject: IDE driver for ARM
From: "Sandeep G.R" <grsandeep85@xxxxxxxxx>
Date: Fri, 29 Jan 2010 11:58:21 +0530

Hi,

I am using S3C2440 ARM9 board and linux-2.6.30.4 kernel is ported and i am using the IDE of the board for our project application, the thing is i have used the address bus LADD1, LADDR2, LADDR3 and data bus LDATA0-LDATA7. Now i need to write some 8-bit data(say 0xAA) to the memory location 0x0800_0000 (nGCS1) and check that data(0xAA) is available on the data bus. How to do this in linux?

--
Thanks & Regards,
SANDEEP G R,

_______________________________________________
linux-arm mailing list
linux-arm@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-arm

Follow-Ups:
- Re: IDE driver for ARM
  - From: anubhav rakshit

Prev by Date: Re: Memory access
Next by Date: Re: IDE driver for ARM
Previous by thread: Using ARM inline assembly, how can I ask gcc to put a variable into a designated register?
Next by thread: Re: IDE driver for ARM
Index(es):
- Date
- Thread

[Linux ARM] [Linux ARM MSM] [Linux ARM Kernel] [Fedora ARM] [IETF Annouce] [Security] [Bugtraq] [Linux] [Linux OMAP] [Linux MIPS] [ECOS] [Asterisk Internet PBX] [Linux API]

Add to Google

Follow linuxarm on Twitter