Re: Linux on Toradex Colibri PXA320

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


>  > Toradex Windows CE Bootloader 3.4 BETA 4 for Colibri Built Sep 22 2009
>  > 
>  > Press [SPACE] to enter Bootloader Menu
>  > 
>  > Module HW V1.2E  SerialNb: 2215423
>  > NAND Flash K9K: 1003 MB, SDRAM: 128 MB
>  > Core Voltage: 1400 mV
>  > CPU: PXA320 806 (403), HSIO: 208, MEM: 208, DDRRAM: 260, SRAM: 312, LCD: 208
>  > Set MAC: 00:14:2D:21:CD:FF
>  
>  [...]
>  
>  > <6>[    3.615891] colibri_pxa3xx_init_eth(): no valid serial boot tag found, tak
>  > ing MAC from device
>  
>  [...]
>  
>  > ax88796 ax88796.): 16bit, irq 100, c891a000, MAC 00:ff:ff:ff:ff:ff
>  
>  Hmm, ok, Marek was right - you _do_ face a problem with your MAC
>  address.
>  
>  The kernel logic first tries to use the serial number boot tag which
>  seems not to be present on your board. If that fails, the MAC is read
>  back from the Ethernet device. But that MAC is indeed bogus, too.
>  
>  For both cases, the problem is related to your bootloader. It should
>  either provide a valid serial number (which is how the way Toradex
>  actually wanted it to be) or leave the MAC address stored in the device
>  (iow, not reset the device before booting into Linux).
>  
>  Daniel
>  

Hi
I changed MAC address with
'#ifconfig eth0 down'
'#ifconfig eth0 hw ether 00:14:2D:21:CD:FF'
'#ifconfig eth0 up'
It has not brought desirable results :(
May be I did something wrong?

_______________________________________________
linux-arm mailing list
linux-arm@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-arm

[Linux ARM]     [Linux ARM MSM]     [Linux ARM Kernel]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

Add to Google Follow linuxarm on Twitter