Re: framebuffer driver on s3c6xx in 2.6.30kernel.

[Mikhail <misha212001@xxxxxxx>]

Problem was because function smdk6410_map_io 
(arch/arm/mach-s3c6410/mach-smdk6410.c) in straight kernel
 lacks /* set the LCD type */ section, which is present in next-s3c branch.
thanks.
Ben Dooks wrote:
> On Thu, Jun 18, 2009 at 09:23:14AM +0300, misha wrote:
>   
>> Ben Dooks wrote:
>>     
>>> On Wed, Jun 17, 2009 at 09:58:38PM +0300, Mikhail wrote:
>>>   
>>>       
>>>> Hello.
>>>>
>>>> I've compiled recent 2.6.30 kernel for s3c6400 processor with default
>>>> configuration for smdk6400.
>>>>     
>>>>         
>>> Is this a straight 2.6.30, or one of the 2.6.30-git releases. The s3c64xx
>>> project is ongoing.
>>>       
>
> The same comments for the 6400 apply for the 6410, the work is currently
> being merged and thus you may find you'll have to go for a later kernel.
>   
>   
>> I've use straight 2.6.30.
>>     
>>> I've not tried the fb driver on the smdk for a while, it was developed
>>> for the OpenMoko and the S3C6410. Whilst it should work for the S3C6400
>>> I'll try and test it in the next couple of days.
>>>
>>>   
>>>       
>> I've got smdk6410 board - result is the same (configuration in the 
>> kernel is only one).
>> According to datasheet - no differences between 400 and 410 in 
>> framebuffer subsystem.
>> I've used and oscilloscope to test nets - no toggling at all. so I 
>> suppose LCD controller itself do not operate.
>> I'm would very surprised if this kernel configuration will work on 
>> openmoko or any other boards
>>
>> -------------------------------------------------------------------
>> List admin: http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
>> FAQ:        http://www.arm.linux.org.uk/mailinglists/faq.php
>> Etiquette:  http://www.arm.linux.org.uk/mailinglists/etiquette.php
>>     
>
>   


-------------------------------------------------------------------
List admin: http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
FAQ:        http://www.arm.linux.org.uk/mailinglists/faq.php
Etiquette:  http://www.arm.linux.org.uk/mailinglists/etiquette.php