Re: GNU Tool Chain Build Software Question on Matrix 510 (Update)

[Roger <roger@xxxxxxxxxx>]

Thanks Prince

I will set up a pc with Centos 5.2 and
try to find a way to solve my problem.
Tanks again all who helped me.

Roger

Prince Riley skrev:
> Roger,
> 
> After some persistence on my part, I was finally able to obtain the 
> following (see e-mail below) information from Artila...
> 
> 
> Prince
> 
> ---------- Forwarded message ----------
> From: *Dennis Kao* <dennis.kao@xxxxxxxxxx <mailto:dennis.kao@xxxxxxxxxx>>
> Date: Tue, Mar 10, 2009 at 2:13 AM
> Subject: RE: GNU Tool Chain Build Software Question on Matrix 510
> To: Prince Riley <wmarketing3@xxxxxxxxx <mailto:wmarketing3@xxxxxxxxx>>
> Cc: mike.kao@xxxxxxxxxx <mailto:mike.kao@xxxxxxxxxx>
> 
> 
> Dear Prince,
>  
> Yes, the CD includes arm-linux toolchain 3.3.2, some examples ,
> document, utilities and modules.
>  
> We built loader , kernel , example with this 3.3.2 toolchain and they 
> are available on our ftp site, ftp://ftp.artila.com  Login:ftp Password:ftp 
> For loader building, just execute the script 'build_64m.sh' or 
> 'build_32m.sh' and please refer to u-boot page.
> For kernel building, no more special command or script and just follow 
> standard Linux kernel build rules.
> For example, 'make ARCH=arm CROSS_COMPILE=arm-linux- uImage 
> matrix510_defconfig'
>  
> Artila is providing a linux-ready platform, we don't suggest the 
> customer to build their own loader or kernel.
> We are not able to support non-Artila standard version.
>  
>  
> Best regards,
> Dennis
> 
>  
> 
> ------------------------------------------------------------------------
> *From:* Prince Riley [mailto:wmarketing3@xxxxxxxxx 
> <mailto:wmarketing3@xxxxxxxxx>]
> *Sent:* Tuesday, March 10, 2009 5:43 AM
> *To:* Dennis Kao
> *Cc:* mike.kao@xxxxxxxxxx <mailto:mike.kao@xxxxxxxxxx>
> *Subject:* Re: GNU Tool Chain Build Software Question on Matrix 510
> 
> 
> Dennis
> 
> Thank you for your response.
> 
> I am writing again to confirm your message (see below) that says you do 
> not have a list of the GNU software tools you have put on the CD-ROM 
> that is sent with your Matrix 510 ARM board. Is that correct?
> 
> If so, then my next question is do you know whether the tools on the 
> CD-ROM include what is needed (source code files, make scripts, etc.) to 
> allow the user to rebuild the Linux kernel and the drivers that work for 
> this board?
> 
> If the answer to that question is also "No", can you please direct me to 
> the person who assembled the CD-ROM.
> 
> Thank you
> 
> Prince Riley
> 
> 
> On Mon, Mar 9, 2009 at 5:12 AM, Dennis Kao <dennis.kao@xxxxxxxxxx 
> <mailto:dennis.kao@xxxxxxxxxx>> wrote:
> 
>     Dear Prince,
>      
>     Sorry. We don't have a list of the exact makeup available.
>      
>     Best regards,
> 
>     Dennis Kao
> 
>     Sales Manager
> 
>     Artila Electronics. Co., Ltd.
> 
>     Tel:886-2-8667-2340#112
> 
>     Fax:886-2-8667-3240
> 
>     http://www.artila.com <http://www.artila.com/>
> 
>     e-mail:dennis.kao@xxxxxxxxxx <mailto:e-mail%3Adennis.kao@xxxxxxxxxx>
> 
>      
> 
>     ------------------------------------------------------------------------
>     *From:* Prince Riley [mailto:wmarketing3@xxxxxxxxx
>     <mailto:wmarketing3@xxxxxxxxx>]
>     *Sent:* Monday, March 09, 2009 2:48 AM
>     *To:* support@xxxxxxxxxx <mailto:support@xxxxxxxxxx>;
>     sales@xxxxxxxxxx <mailto:sales@xxxxxxxxxx>
>     *Subject:* GNU Tool Chain Build Software Question on Matrix 510
> 
>     Hello,
> 
>     A fellow user asked a question in one of the ARM discussion groups
>     about building GNU software with the tool chain included on the
>     Matrix 510 Users CD.
>     I presume that this tool chain has the GNU tool set, but the manual
>     does not specify which tools it actually includes. Is there a list
>     available of the exact makeup
>     (list of the tools) available.
> 
>     Thank you
> 
>     Prince Riley
> 
>     -- 
>     This message has been scanned for viruses and
>     dangerous content by *MailScanner* <http://www.mailscanner.info/>,
>     and is
>     believed to be clean.
> 
>     -- 
>     This message has been scanned for viruses and
>     dangerous content by *MailScanner* <http://www.mailscanner.info/>,
>     and is
>     believed to be clean. 
> 
> 
> 
> -- 
> This message has been scanned for viruses and
> dangerous content by *MailScanner* <http://www.mailscanner.info/>, and is
> believed to be clean.
> 
> -- 
> This message has been scanned for viruses and
> dangerous content by *MailScanner* <http://www.mailscanner.info/>, and is
> believed to be clean.
> 

-------------------------------------------------------------------
List admin: http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
FAQ:        http://www.arm.linux.org.uk/mailinglists/faq.php
Etiquette:  http://www.arm.linux.org.uk/mailinglists/etiquette.php