Hi, Is there a possibility to clean the data cache on an arm920t board under arm-linux? I'm working on a c program, where a lookup table must be removed from the cache or the entire cache cleaned. Is this possible without causing an segmentation fault as normal root user? I read that with following code it is possible to clean and invalidate the dcahe: MCR p15,0,Rd,c7,c14,1 How can I add this to my programm with inline assembler? Thanks! ------------------------------------------------------------------- List admin: http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm FAQ: http://www.arm.linux.org.uk/mailinglists/faq.php Etiquette: http://www.arm.linux.org.uk/mailinglists/etiquette.php
- Follow-Ups:
- Re: Cleaning cache on a SBC2440-II (ARM920T) board
- From: Marco Stornelli
- Re: Cleaning cache on a SBC2440-II (ARM920T) board
- From: Russell King - ARM Linux
- Re: Cleaning cache on a SBC2440-II (ARM920T) board
- Prev by Date: Time measuring on an SBC2440-II (ARM920T) board
- Next by Date: Re: Time measuring on an SBC2440-II (ARM920T) board
- Previous by thread: Time measuring on an SBC2440-II (ARM920T) board
- Next by thread: Re: Cleaning cache on a SBC2440-II (ARM920T) board
- Index(es):