PXA320: No Output after decompressing kernelimage

["Maik Steuer" <Maik.Steuer@xxxxxx>]

Hello,

I'm trying to boot a Kernel (2.6.26) with Marvell PXA320 on an Trizeps5 module.

After the image was decompessed there is no more output on the serial interface.

I think the registers r0-r2 are correct set by the bootloader (r0 = 0, r1 = 1650, r2 = 0). The bootloader is not able to set some kernel_parameters so r2 is 0.

Is there any chance to debug next steps?

At which time use the kernel the pxa-serial driver?


Is it possible that the machine-parameters like .boot_params, .map_io or .phys_io are not correct?

greets 
Maik
-- 
Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger

-------------------------------------------------------------------
List admin: http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
FAQ:        http://www.arm.linux.org.uk/mailinglists/faq.php
Etiquette:  http://www.arm.linux.org.uk/mailinglists/etiquette.php