Re: booting a 2.6.16 kernel

[Javier Ruere <javierruere@xxxxxxxxxx>]

El Lunes, 3 de Julio de 2006 13:25, digitek escribió:
> Javier Ruere wrote:
> <snip>
>
> >   Until you get the latest version of U-Boot working, a quick workaround
> > is to modify the kernel. In the file arch/arm/tools/mach-types change the
> > line: at91rm9200ek        MACH_AT91RM9200EK   AT91RM9200EK        705
> > for
> > at91rm9200ek        MACH_AT91RM9200EK   AT91RM9200EK        262
> >   With that modification it should boot.
>
> Hi - thanks.
> After making the edit suggested above, I get this message [0].
> This is always the same message and I wonder now if the problem
> is in another place because whatever I change in head.S or
> mach-types the error is the same.  I even did make clean first,
> so I wonder if I should just go install the new U-boot as Wolfgang
> suggested.  I do not know how, so it will be the long way around.
> I will need some good docs or howto on doing that if anyone
> has some good ones.  I think everything I need will be here
> http://www.denx.de/wiki/DULG/Manual
>
>
> [0] -----------------------------------------------
> Error: unrecognized/unsupported machine ID (r1 = 0x000000fb).
>
> Available machine support:
>
> ID (hex)        NAME
> 00000106        Atmel AT91RM9200-DK
>
> Please check your kernel config and/or bootloader.

Sir, I apologize. My suggestion is, as you have found out, incorrect. I didn't 
check that the reported ID, 0xfb or 251, is different from the one in the kit 
I am currently using, an AT91RM9200-EK. What kind of kit are you using?
Anyway, for the simbol of your kit changing the code to 251 or 0xFB should 
make it boot.

Regards,
		Javier

-------------------------------------------------------------------
List admin: http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
FAQ:        http://www.arm.linux.org.uk/mailinglists/faq.php
Etiquette:  http://www.arm.linux.org.uk/mailinglists/etiquette.php