Re: Enabling MMU in UBoot for at91rm9200 | |
| [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] | |
On Wed, Jul 20, 2005 at 07:40:18PM +0800, kiwi yeung wrote: > How can I enable MMU and hence DCache in UBoot? I found that the > gunzip in Uboot is very slow when compare with running under Linux. I > think is due to the fact that MMU is not enabled and hence Dcache is > not enabled. Is there a quick way to enable them? I got the impression I was pretty clear on the linux-arm-toolchain list: http://lists.arm.linux.org.uk/pipermail/linux-arm-toolchain/2005-July/000248.html And don't even *think* about sending the same question to the linux-arm-kernel mailing list. Erik [linux-arm-owner #2] -- ---- Erik Mouw ---- www.bitwizard.nl ---- +31 15 2600 998 ---- ------------------------------------------------------------------- List admin: http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm FAQ: http://www.arm.linux.org.uk/mailinglists/faq.php Etiquette: http://www.arm.linux.org.uk/mailinglists/etiquette.php
[Site Home] [IETF Annouce] [Security] [Bugtraq] [Linux] [Linux ARM Kernel] [Linux MIPS] [ECOS] [Tools] [DDR & Rambus] [Monitors]