RE: modem not responding

[Gianfranco Pesce <PesceG@xxxxxxxxxxxxxxxxxx>]

	I have solved my problem , was the cable from the serial port and
the 	modem ( I don't reply before cause I was flu )

	Thank you for your attention
	
		gianfranco
	

> -----Original Message-----
> From: Ben Dooks [mailto:ben-linux-arm@xxxxxxxxxx]
> Sent: Monday, January 31, 2005 1:58 PM
> To: Gianfranco Pesce
> Cc: 'linux-arm@xxxxxxxxxxxxxxxxxxxxxx'
> Subject: Re: modem not responding
> 
> 
> On Mon, Jan 31, 2005 at 12:32:27PM +0100, Gianfranco Pesce wrote:
> > 
> > I am using an ARM920T machine with Samsumg SMDK 2410 and a 
> Linux embedded
> > and a 2.4.18 kernel , BusyBox 0.60.3
> 
> This is an old kernel, and one provided by a third party vendor, 
> please look at moving to 2.6, as this is being actively developed
> in the mainline kernel.
>  
> > I want to use a modem
> > I connect my external modem ( Falcom A2D ) to the ttyS1
> > but when I do
> > cat < /dev/ttyS1 &
> > cat > /dev/ttyS1
> > AT
> > 
> > the modem don't reply
> 
> You might want to try a proper terminal program, such as minicom
> 
> > 
> > the command setserial /dev/ttyS1 -a says
> > 
> > /dev/ttyS1 , Line 1,UART undefined,Port: 0x50004000, IRQ: 55
> > Baud_base: 3125000, close_delay: 50, divisor: 0
> > Flags: spd_normal
> 
> Other than suggesting moving to an 2.6 kernel, there isn't much
> more than to say contact your kernel provider. 
> 
> -- 
> Ben
> 
> Q:      What's a light-year?
> A:      One-third less calories than a regular year.
> 

-------------------------------------------------------------------
Subscription options: http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
FAQ/Etiquette:       http://www.arm.linux.org.uk/armlinux/mailinglists.php