[Prev Page][Next Page]
- Soft lockup -- kernel 2.6.24.6 on PXA 270
- From: "ffileppo" <ffileppo@xxxxxxxxx>
- Mailing List FAQ
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Mailing List Etiquette
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: the way of making ramdisk image for smdk2410?
- From: "dishui" <dishui@xxxxxxxxx>
- 2.6.26-rc4 + xscaleiop compile errors
- From: Chris Wilson <chris+linux-arm@xxxxxxxxx>
- jffs2 support for nand flash
- From: "Tiju Jacob" <jacobtiju@xxxxxxxxx>
- Re: the way of making ramdisk image for smdk2410?
- From: "Tiju Jacob" <jacobtiju@xxxxxxxxx>
- the way of making ramdisk image for smdk2410?
- From: chenyuefeizh <chenyuefeizh@xxxxxxx>
- Re: how add kernel module to linux ported on arm9
- From: "rahul kulkarni" <rahulgkulkarni@xxxxxxxxx>
- how add kernel module to linux ported on arm9
- From: "Manila Goel" <manila.goel@xxxxxxxxx>
- [PATCH] ep93xx: add Syscon ChipID register definition
- From: "hartleys" <hartleys@xxxxxxxxxxxxxxxxxxx>
- [PATCH] ep93xx: add ssp clock
- From: "hartleys" <hartleys@xxxxxxxxxxxxxxxxxxx>
- Re: Remote debugging a arm controller with Kdevelop (multi threaded)
- From: "Richard Wenzel" <Rotarn@xxxxxx>
- Re: Remote debugging a arm controller (taskit) with Kdevelop
- From: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
- Re: problem in accessing register for at91rm9200
- From: "Manila Goel" <manila.goel@xxxxxxxxx>
- need help to enable ARM AMBA PL031 RTC
- From: "Gururaja Hebbar" <ghebbar@xxxxxxxxx>
- Re: Remote debugging a arm controller (taskit) with Kdevelop
- From: Albert ARIBAUD <albert.aribaud@xxxxxxx>
- Re: Remote debugging a arm controller (taskit) with Kdevelop
- From: "Richard Wenzel" <Rotarn@xxxxxx>
- Re: Remote debugging a arm controller (taskit) with Kdevelop
- From: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
- Remote debugging a arm controller (taskit) with Kdevelop
- From: "Richard Wenzel" <Rotarn@xxxxxx>
- Mailing List Etiquette
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Mailing List FAQ
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Mailing List FAQ
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Mailing List Etiquette
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: building kernel with gcc-4.3.x
- From: Nicolas Pitre <nico@xxxxxxx>
- Re: OT: Mapping virtual addresses to physical
- From: "Tomas D." <mailsoc@xxxxxxxxx>
- Re: building kernel with gcc-4.3.x
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: Mapping virtual addresses to physical
- From: AKS <aung.aungkyawsoe@xxxxxxxxx>
- Re: building kernel with gcc-4.3.x
- From: Nicolas Pitre <nico@xxxxxxx>
- Re: Mapping virtual addresses to physical
- From: Andrejs Cainikovs <AndrejsC@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: building kernel with gcc-4.3.x
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: building kernel with gcc-4.3.x
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: Mapping virtual addresses to physical
- From: "Tomas D." <mailsoc@xxxxxxxxx>
- Re: building kernel with gcc-4.3.x
- From: "Chris Steel" <chris.steel@xxxxxxxxxxx>
- Re: building kernel with gcc-4.3.x
- From: "Chris Steel" <chris.steel@xxxxxxxxxxx>
- Re: Mapping virtual addresses to physical
- From: "Alan Casey" <alan.casey5@xxxxxxxxxxx>
- Re: Mapping virtual addresses to physical
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: Mapping virtual addresses to physical
- From: "Alan Casey" <alan.casey5@xxxxxxxxxxx>
- Re: building kernel with gcc-4.3.x
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: building kernel with gcc-4.3.x
- From: "Chris Steel" <chris.steel.lnx@xxxxxxxxxxxxxx>
- Re: Mapping virtual addresses to physical
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Mapping virtual addresses to physical
- From: "Alan Casey" <alan.casey5@xxxxxxxxxxx>
- Mailing List FAQ
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Mailing List Etiquette
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- [no subject]
- From: "sungod" <bpc_2003@xxxxxx>
- [no subject]
- From: "sungod" <bpc_2003@xxxxxx>
- Re: building kernel with gcc-4.3.x
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- building kernel with gcc-4.3.x
- From: "Chris Steel" <chris.steel.lnx@xxxxxxxxxxxxxx>
- Re: problem in accessing register for at91rm9200
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: problem in accessing register for at91rm9200
- From: "Richard Cong" <gz_yhcong@xxxxxxx>
- Re: problem in accessing register for at91rm9200
- From: "Andrew Victor" <avictor.za@xxxxxxxxx>
- RE: problem in accessing register for at91rm9200
- From: "Prakash" <Prakash.Kamliya@xxxxxxxxxxxxxxxxx>
- problem in accessing register for at91rm9200
- From: "Manila Goel" <manila.goel@xxxxxxxxx>
- Help! OHCI Unrecoverable Error
- From: "Richard Cong" <gz_yhcong@xxxxxxx>
- Re: Kconfig macro and type identifier rename
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Mailing List Etiquette
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Mailing List FAQ
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Kconfig macro and type identifier rename
- From: Stefan Herbrechtsmeier <hbmeier@xxxxxxxxxxxxxxxxxxxx>
- Re: Unexplained trap (from a module that modifies permissions of remapped page tables to user space)
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: Unexplained trap (from a module that modifies permissions of remapped page tables to user space)
- From: "Naval Saini" <navalnovel@xxxxxxxxx>
- Mailing List Etiquette
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Mailing List FAQ
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- About S2C24xx Interrupt Controller
- From: "Qiang Wang" <rurality.linux@xxxxxxxxx>
- Unexplained trap (from a module that modifies permissions of remapped page tables to user space)
- From: "Naval Saini" <navalnovel@xxxxxxxxx>
- Re: CPU Cycles Consumed by C program on PXA255
- From: "Junaid Jamil" <junaidfcs@xxxxxxxxx>
- Re: CPU Cycles Consumed by C program on PXA255
- Re: CPU Cycles Consumed by C program on PXA255
- From: Erik Mouw <mouw@xxxxxxxxxxxx>
- CPU Cycles Consumed by C program on PXA255
- From: "Junaid Jamil" <junaidfcs@xxxxxxxxx>
- Re: Module kernel compilation
- From: Erik Mouw <mouw@xxxxxxxxxxxx>
- Module kernel compilation
- From: "Mathieu Roger" <Mathieu.Roger@xxxxxxxxxxxxxx>
- Reg accessing FPGA
- From: Prabha J <prabha.j@xxxxxxx>
- Re: About Kbuild in ARM
- From: "Yu Alex" <byu@xxxxxxxxxxx>
- Re: About Kbuild in ARM
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: Problem cross-compiling Apache
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- problem while configuring OpenSSH
- From: prashant sangal <prashantsangal@xxxxxxxxxxx>
- Re: Problem cross-compiling Apache
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- Problem cross-compiling Apache
- From: "Marta Gros Marín" <mgros@xxxxxxxxx>
- Re: Looking for memory leak detector with ARM EABI stack trace support
- From: Erik Mouw <mouw@xxxxxxxxxxxx>
- Re: How all the secondary cores boot in MPCore
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
- How all the secondary cores boot in MPCore
- From: Charly Bechara <c_bechara@xxxxxxxxxxx>
- Looking for memory leak detector with ARM EABI stack trace support
- From: "Diego Santa Cruz" <Diego.SantaCruz@xxxxxxxxxxxx>
- Mailing List Etiquette
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Mailing List FAQ
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: strace for armv5l eabi
- From: Ian McDonnell <ian@xxxxxxxxxxxxxxxxx>
- Re: strace for armv5l eabi
- From: Jim Freeman <jfree@xxxxxxxxxxxxx>
- strace for armv5l eabi
- From: Ian McDonnell <ian@xxxxxxxxxxxxxxxxx>
- Error in Linux kernel compilation
- From: "Prajosh Premdas" <premdas.prajosh@xxxxxxxxx>
- Re: Reg memory map
- From: "Andrew Victor" <avictor.za@xxxxxxxxx>
- Reg memory map
- From: Prabha J <prabha.j@xxxxxxx>
- Mailing List Etiquette
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Mailing List FAQ
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: If someone developed ARM DMAC driver under GPL?
- From: "Yu Alex" <byu@xxxxxxxxxxx>
- Re: About Kbuild in ARM
- From: "Yu Alex" <byu@xxxxxxxxxxx>
- Re: If someone developed ARM DMAC driver under GPL?
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: If someone developed ARM DMAC driver under GPL?
- From: "Yu Alex" <byu@xxxxxxxxxxx>
- Re: About Kbuild in ARM
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: If someone developed ARM DMAC driver under GPL?
- From: Carlo Zinato <c.zinato@xxxxxxxxxxx>
- If someone developed ARM DMAC driver under GPL?
- From: "Yu Alex" <byu@xxxxxxxxxxx>
- About Kbuild in ARM
- From: "Yu Alex" <byu@xxxxxxxxxxx>
- Re: Asterisk on ARM
- From: "Boris Ratner" <ratner2@xxxxxxxxx>
- Asterisk on ARM
- From: "Mathieu Roger" <Mathieu.Roger@xxxxxxxxxxxxxx>
- Re: Reg ioremap
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: Reg ioremap
- From: Prabha J <prabha.j@xxxxxxx>
- Re: Reading ttyS1
- From: helight <helight@xxxxxxx>
- Re: Reg ioremap
- From: "Matt Gessner" <mgessner@xxxxxxxxx>
- Re: Reading ttyS1
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: Reading ttyS1
- From: "Tomas D." <mailsoc@xxxxxxxxx>
- Re: Reading ttyS1
- From: helight <helight@xxxxxxx>
- Re: Reading ttyS1
- From: "Tomas D." <mailsoc@xxxxxxxxx>
- Re: cpu-freq on pxa271 (incorrect frequency table?)
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: Reading ttyS1
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: PXA standby mode with SDRAM suspend (low power refresh)
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: Reg ioremap
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Reg ioremap
- From: Prabha J <prabha.j@xxxxxxx>
- cpu-freq on pxa271 (incorrect frequency table?)
- From: Jonathan Cameron <jic23@xxxxxxxxx>
- Mailing List FAQ
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Mailing List Etiquette
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: PXA standby mode with SDRAM suspend (low power refresh)
- From: "David Hunter" <hunterd42@xxxxxxxxx>
- Reading ttyS1
- From: "Tomas D." <mailsoc@xxxxxxxxx>
- Re: How a process/thread is transferred from the CFS scheduler to ARM CPU specifc code?
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- How a process/thread is transferred from the CFS scheduler to ARM CPU specifc code?
- From: Charly Bechara <c_bechara@xxxxxxxxxxx>
- PXA standby mode with SDRAM suspend (low power refresh)
- From: "Shane Volpe" <shanevolpe@xxxxxxxxx>
- Mailing List Etiquette
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Mailing List FAQ
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: System lock-up stops if suspend has occurred
- From: "Shane Volpe" <shanevolpe@xxxxxxxxx>
- Re: System lock-up stops if suspend has occurred
- From: "Shane Volpe" <shanevolpe@xxxxxxxxx>
- Re: System lock-up stops if suspend has occurred
- From: "Shane Volpe" <shanevolpe@xxxxxxxxx>
- Re: System lock-up stops if suspend has occurred
- From: "Shane Volpe" <shanevolpe@xxxxxxxxx>
- Re: AT91RM9200 board + piezo sounder
- From: "Andrejs Cainikovs" <AndrejsC@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- 88W8618 - 88W8xx8
- From: John Crispin <john@xxxxxxxxxxx>
- Re: Linux Distro
- From: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
- get printks from start_kernel on console (serial)
- From: Vyas Ashish <Vyas.Ashish@xxxxxxxxxxxxxxx>
- Re: AT91RM9200 board + piezo sounder
- From: Erik Mouw <mouw@xxxxxxxxxxxx>
- Mailing List Etiquette
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Mailing List FAQ
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: Linux Distro
- From: Carlo Zinato <c.zinato@xxxxxxxxxxx>
- Linux Distro
- From: "Mathieu Roger" <Mathieu.Roger@xxxxxxxxxxxxxx>
- AT91RM9200 board + piezo sounder
- From: Andrejs Cainikovs <AndrejsC@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: driver -> user space async communication
- From: Erik Mouw <mouw@xxxxxxxxxxxx>
- driver -> user space async communication
- From: Victor Librado <vlibrado@xxxxxxxxxxxxxxxx>
- Re: machine name update
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- machine name update
- From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
- Mailing List Etiquette
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Mailing List FAQ
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: what is the difference between arm-linux and arm-elf
- From: "Martin Guy" <martinwguy@xxxxxxxx>
- what is the difference between arm-linux and arm-elf
- From: "vichy" <vichy.kuo@xxxxxxxxx>
- Fwd: Graphics LCD w/ SAM9260 - How to get started
- From: Alex Parkinson <okalex@xxxxxxxxx>
- Re: well invites you to join Zorpia
- From: Bernd Petrovitsch <bernd@xxxxxxxxx>
- Re: well invites you to join Zorpia
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: how to get gnu assembler document
- From: Khem Raj <kraj@xxxxxxxxxx>
- RE: how to get gnu assembler document
- From: "vichy" <vichy.kuo@xxxxxxxxx>
- how to get gnu assembler document
- From: "vichy" <vichy.kuo@xxxxxxxxx>
- Re: 2.6.24 AT91 MACB driver broken
- From: Alex Parkinson <okalex@xxxxxxxxx>
- broken lists.arm.linux.org weblink to maillist archive
- From: Ian McDonnell <ian@xxxxxxxxxxxxxxxxx>
- 2.6.24 AT91 MACB driver broken
- From: Alex Parkinson <okalex@xxxxxxxxx>
- PCI Interface problem
- From: "Doru Botez" <dbotez@xxxxxxxxxxxxxxxxx>
- Re: VALUE OF VARIABLE FROM ARM REGISTER USING STACK FRAME BACKTRACE
- From: Erik Mouw <mouw@xxxxxxxxxxxx>
- Re: TXCOMP timeout - AT91 TWI
- From: "Andrew Victor" <avictor.za@xxxxxxxxx>
- TXCOMP timeout - AT91 TWI
- From: pavan_savoy@xxxxxxxxxxxxxx
- Mailing List FAQ
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Mailing List Etiquette
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- VALUE OF VARIABLE FROM ARM REGISTER USING STACK FRAME BACKTRACE
- From: ashim saikia <ar.saikia@xxxxxxxxx>
- Re: PXA keypad driver in 2.6.25
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- PXA keypad driver in 2.6.25
- From: Jeff Sutherland <jeffs@xxxxxxxxxxxxxxxxxx>
- Re: How to check the core execution for each thread?
- From: Antti P Miettinen <ananaza@xxxxxx>
- RE: ep93xx gpio interrupt debounce
- From: "hartleys" <hartleys@xxxxxxxxxxxxxxxxxxx>
- Re: ep93xx gpio interrupt debounce
- From: Lennert Buytenhek <buytenh@xxxxxxxxxxxxxx>
- at91sam9261 Slave Device not replying back
- From: pavan_savoy@xxxxxxxxxxxxxx
- Mailing List Etiquette
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Mailing List FAQ
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- RE: ep93xx gpio interrupt debounce
- From: "hartleys" <hartleys@xxxxxxxxxxxxxxxxxxx>
- Re: ep93xx gpio interrupt debounce
- From: Lennert Buytenhek <buytenh@xxxxxxxxxxxxxx>
- Re: ep93xx gpio interrupt debounce
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- RE: ep93xx gpio interrupt debounce
- From: "hartleys" <hartleys@xxxxxxxxxxxxxxxxxxx>
- Re: ep93xx gpio interrupt debounce
- From: Lennert Buytenhek <buytenh@xxxxxxxxxxxxxx>
- How to check the core execution for each thread?
- From: Charly Bechara <c_bechara@xxxxxxxxxxx>
- Re: ep93xx gpio interrupt debounce
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- ep93xx gpio interrupt debounce
- From: "hartleys" <hartleys@xxxxxxxxxxxxxxxxxxx>
- CS on SPI slave device & probe
- From: pavan_savoy@xxxxxxxxxxxxxx
- Re: Kernel 2.6.25 vs Orion git repository
- From: Nicolas Pitre <nico@xxxxxxx>
- Re: Kernel 2.6.25 vs Orion git repository
- From: Lennert Buytenhek <buytenh@xxxxxxxxxxxxxx>
- Kernel 2.6.25 vs Orion git repository
- From: Albert ARIBAUD <albert.aribaud@xxxxxxx>
- Debian/arm OABI binaries (was: Re: Realview & USB)
- From: Antti P Miettinen <ananaza@xxxxxx>
- RE: add SPI support
- From: "Doron Sandroy" <doron@xxxxxxxxxxxx>
- RE: add SPI support
- From: Keith Lugsden <keith@xxxxxxxxxxxx>
- Re: ARM-Linux FDPIC ABI?
- From: "Zhiqiang Yang" <ee.yangzhiqiang@xxxxxxxxx>
- RE: add SPI support
- From: "Doron Sandroy" <doron@xxxxxxxxxxxx>
- Mailing List FAQ
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Mailing List Etiquette
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: Can't build flashable image
- From: ANOOP <anoop.chargotra@xxxxxxxxx>
- Re: add SPI support
- From: Bill Gatliff <bgat@xxxxxxxxxxxxxxx>
- add SPI support
- From: דורון <doronsa@xxxxxxxxx>
- Can't build flashable image
- From: "Matt Gessner" <mgessner@xxxxxxxxx>
- Re: how to build a cross-compile-toolchain?
- From: "Alvin Cao" <alvin.cao@xxxxxxxxx>
- Re: how to build a cross-compile-toolchain?
- From: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
- Re: pxa270 colibri no USB device detect with 2.6.22 Kernel
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- ARM-Linux FDPIC ABI?
- From: <pcwalton@xxxxxxxxxxxx>
- Re: how to build a cross-compile-toolchain?
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- how to build a cross-compile-toolchain?
- From: "顾远" <saintthought@xxxxxxxxx>
- Re: Realview & USB
- From: Antti P Miettinen <ananaza@xxxxxx>
- USART mode change
- From: "Tomas D." <mailsoc@xxxxxxxxx>
- Re: Realview & USB
- From: Bill Gatliff <bgat@xxxxxxxxxxxxxxx>
- Re: Xserver dor EP9307 ARM Board
- From: Erik Mouw <mouw@xxxxxxxxxxxx>
- Re: Xserver dor EP9307 ARM Board
- From: Bhaskar <abc.bhaskar@xxxxxxxxx>
- Re: Xserver dor EP9307 ARM Board
- From: "Martin Guy" <martinwguy@xxxxxxxx>
- Xserver dor EP9307 ARM Board
- From: Bhaskar <abc.bhaskar@xxxxxxxxx>
- Realview & USB
- From: Antti P Miettinen <ananaza@xxxxxx>
- XOrg for EP9307 Board
- From: Bhaskar <abc.bhaskar@xxxxxxxxx>
- AW: pxa270 colibri no USB device detect with 2.6.22 Kernel
- From: "Maik Steuer" <Maik.Steuer@xxxxxx>
- Re: Kernel Oops after call to platform_driver_register
- From: Alex Parkinson <okalex@xxxxxxxxx>
- Mailing List FAQ
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Mailing List Etiquette
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Kernel Oops after call to platform_driver_register
- From: Alex Parkinson <okalex@xxxxxxxxx>
- SSH Query
- From: "Ajay Jain" <Ajay.Jain@xxxxxxxxxxxxx>
- Re: pxa270 colibri no USB device detect with 2.6.22 Kernel
- From: "Maik Steuer" <Maik.Steuer@xxxxxx>
- The difference between D-Cache writeback and writethrough policies on omap5912, omap2420.
- From: "hakbong Lee" <k2804732@xxxxxxxxx>
- Re: pxa270 colibri no USB device detect with 2.6.22 Kernel
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- pxa270 colibri no USB device detect with 2.6.22 Kernel
- From: "Maik Steuer" <Maik.Steuer@xxxxxx>
- Re: ARM opensource
- From: Andreas Micklei <andreas.micklei@xxxxxxxxxx>
- BIN_START_IN_SDRAM
- From: Gayan Prabodha Hettiarachchi <gprabodha@xxxxxxxxx>
- Re: PB11MPCore & ethernet
- From: Antti P Miettinen <ananaza@xxxxxx>
- Re: PB11MPCore & ethernet
- From: Lennert Buytenhek <buytenh@xxxxxxxxxxxxxx>
- Re: USB on Compulab PXA-270
- From: "Cliff Brake" <cliff.brake@xxxxxxxxx>
- Re: AT91RM9200 GPIO driver
- From: "Andrew Victor" <avictor.za@xxxxxxxxx>
- Re: PB11MPCore & ethernet
- From: Antti P Miettinen <ananaza@xxxxxx>
- AT91RM9200 GPIO driver
- From: "Matt Gessner" <mgessner@xxxxxxxxx>
- Re: ARM opensource
- From: Bill Gatliff <bgat@xxxxxxxxxxxxxxx>
- Re: ARM opensource
- From: Erik Mouw <mouw@xxxxxxxxxxxx>
- Re: ARM opensource
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: ARM opensource
- From: Andreas Micklei <andreas.micklei@xxxxxxxxxx>
- Re: ARM opensource
- From: Bill Gatliff <bgat@xxxxxxxxxxxxxxx>
- Re: ARM opensource
- From: Erik Mouw <mouw@xxxxxxxxxxxx>
- Re: ARM opensource
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: ARM opensource
- From: Bill Gatliff <bgat@xxxxxxxxxxxxxxx>
- Re: ARM opensource
- From: Carlo Zinato <c.zinato@xxxxxxxxxxx>
- Re: ARM opensource
- From: Joe <zentrale.at.work@xxxxxxxxx>
- ARM opensource
- From: "Matej Haulik" <mhaulik@xxxxxxxxx>
- USB on Compulab PXA-270
- From: Keith Lugsden <keith@xxxxxxxxxxxx>
- Page table
- From: "hartleys" <hartleys@xxxxxxxxxxxxxxxxxxx>
- Re: PB11MPCore & ethernet
- From: Lennert Buytenhek <buytenh@xxxxxxxxxxxxxx>
- Re: PB11MPCore & ethernet
- From: Antti P Miettinen <ananaza@xxxxxx>
- Re: at91 dataflash
- From: Ian McDonnell <ian@xxxxxxxxxxxxxxxxx>
- System lock-up stops if suspend has occurred
- From: "Shane Volpe" <shanevolpe@xxxxxxxxx>
- Re: Kernel panic
- From: Ramprasad B <ramprasad@xxxxxxxxxxxxx>
- RE: Kernel panic
- From: "Tim Barr" <tbarr@xxxxxxxxxxxxx>
- Mailing List FAQ
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Mailing List Etiquette
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- RE: Kernel panic
- From: "hartleys" <hartleys@xxxxxxxxxxxxxxxxxxx>
- RE: Kernel panic
- From: "hartleys" <hartleys@xxxxxxxxxxxxxxxxxxx>
- Re: Problem with iMX27 USB Host2
- From: Duck <duck@xxxxxxxxxxxxx>
- Kernel panic
- From: "Tim Barr" <tbarr@xxxxxxxxxxxxx>
- Re: PB11MPCore & ethernet
- From: Lennert Buytenhek <buytenh@xxxxxxxxxxxxxx>
- Re: PB11MPCore & ethernet
- From: Bill Gatliff <bgat@xxxxxxxxxxxxxxx>
- Re: PB11MPCore & ethernet
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: PB11MPCore & ethernet
- From: Bill Gatliff <bgat@xxxxxxxxxxxxxxx>
- PB11MPCore & ethernet
- From: Antti P Miettinen <ananaza@xxxxxx>
- Re: How to force to linux to generate core dumps?
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- How to force to linux to generate core dumps?
- From: Joaquim Duran <joaquinduran@xxxxxxxxxxxx>
- Re: Problem with iMX27 USB Host2
- From: Aigor <igt1972@xxxxxxxxx>
- Re: Problem with iMX27 USB Host2
- From: Duck <duck@xxxxxxxxxxxxx>
- 2.6.25-rc7 and atmel serial ports on AT91RM9200
- From: "Matt Gessner" <mgessner@xxxxxxxxx>
- Re: framebuffer console
- From: Gianluca <gianlucarenzi@xxxxxxxxx>
- Re: AT91RM9200-ek USB device interface
- From: Aras Vaichas <arasv@xxxxxxxxxxxxxx>
- Re: framebuffer console
- From: "Martin Guy" <martinwguy@xxxxxxxx>
- framebuffer console
- From: Gianluca <gmattiroli@xxxxxxxxx>
- Re: at91 dataflash
- From: Himanshu Chauhan <chauhan.jpr@xxxxxxxxx>
- Re: AT91RM9200-ek USB device interface
- From: "Ulf Samuelsson" <ulf.samuelsson@xxxxxxxxx>
- Re： Re: at91rm9200 linux booting problem.
- From: hui liu <fubaiqun1@xxxxxxxxxxxx>
- AT91RM9200-ek USB device interface
- From: "Matt Gessner" <mgessner@xxxxxxxxx>
- Re: at91 dataflash
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: at91 dataflash
- From: Victor Librado <vlibrado@xxxxxxxxxxxxxxxx>
- Re: at91 dataflash
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: at91 dataflash
- From: Himanshu Chauhan <chauhan.jpr@xxxxxxxxx>
- Re: at91 dataflash
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: at91 dataflash
- From: "Ulf Samuelsson" <ulf@xxxxxxxxx>
- Re: at91 dataflash
- From: vibi <vibi_sreenivasan@xxxxxxx>
- Re: at91 dataflash
- From: Victor Librado <vlibrado@xxxxxxxxxxxxxxxx>
- at91 dataflash
- From: Victor Librado <vlibrado@xxxxxxxxxxxxxxxx>
- Problem with iMX27 USB Host2
- From: Aigor <igt1972@xxxxxxxxx>
- Re: at91rm9200 linux booting problem.
- From: Bill Gatliff <bgat@xxxxxxxxxxxxxxx>
- Re: Adding device
- From: "Tomas D." <mailsoc@xxxxxxxxx>
- Re: at91rm9200 linux booting problem.
- From: hui liu <fubaiqun1@xxxxxxxxxxxx>
- Re: How to boot from Compact flash
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: Adding device
- From: AKS <aung.aungkyawsoe@xxxxxxxxx>
- How to boot from Compact flash
- From: tusharb <tusharb@xxxxxxxxxxxxxxxx>
- at91rm9200 linux booting problem.
- From: hui liu <fubaiqun1@xxxxxxxxxxxx>
- Re: smc91x: No IRQF_TRIGGER set_type function for IRQ... (kernel 2.6.22.6 - pxa270 based board)
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Adding device
- From: "Tomas D." <mailsoc@xxxxxxxxx>
- smc91x: No IRQF_TRIGGER set_type function for IRQ... (kernel 2.6.22.6 - pxa270 based board)
- From: <ffileppo@xxxxxxxx>
- Mailing List Etiquette
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Mailing List FAQ
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: CPU frequency
- From: Erik Mouw <mouw@xxxxxxxxxxxx>
- CPU frequency
- From: Gianluca Mattiroli <gmatt_76@xxxxxxxxx>
- Why ARM device resource don't use the section mode?
- From: "Yu Alex" <byu@xxxxxxxxxxx>
- Re: Serial interface send queue
- From: Carlo Zinato <c.zinato@xxxxxxxxxxx>
- RE: Device driver
- From: "Erazem" <erazem@xxxxxxxxxxxxxxx>
- Re: Device driver
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Serial interface send queue
- From: "Erazem Polutnik" <erazem.polutnik@xxxxxxxxxxxxxx>
- RE: Device driver
- From: "Erazem" <erazem@xxxxxxxxxxxxxxx>
- Re: Device driver
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- RE: Device driver
- From: "Erazem" <erazem@xxxxxxxxxxxxxxx>
- Re: Device driver
- From: Bill Gatliff <bgat@xxxxxxxxxxxxxxx>
- Device driver
- From: "Erazem" <erazem@xxxxxxxxxxxxxxx>
- Kernel 2.6.14-intcl on PXA270 based board: Ramdisk and bad gzip magic numbers
- From: <ffileppo@xxxxxxxx>
- Mailing List Etiquette
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Mailing List FAQ
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- question about armlink symbol
- From: "vichy" <vichy.kuo@xxxxxxxxx>
- Re: RE: Kernel 2.6.14-intcl on PXA270 based board: failed to execute init
- From: "frankxu0217" <frankxu0217@xxxxxxxxxxxx>
- Re: Kernel 2.6.14-intcl on PXA270 based board: failed to execute init
- From: "Yu Alex" <byu@xxxxxxxxxxx>
- Re: R: Kernel 2.6.14-intcl on PXA270 based board: failed to execute init
- From: "frankxu0217" <frankxu0217@xxxxxxxxxxxx>
- Re: Kernel 2.6.14-intcl on PXA270 based board: failed to execute init
- From: "Yu Alex" <byu@xxxxxxxxxxx>
- Re: Kernel 2.6.14-intcl on PXA270 based board: failed to execute init
- From: "frankxu0217" <frankxu0217@xxxxxxxxxxxx>
- Re: LCD powerdown
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Kernel 2.6.14-intcl on PXA270 based board: failed to execute init
- From: <ffileppo@xxxxxxxx>
- LCD powerdown
- From: Gianluca Mattiroli <gmatt_76@xxxxxxxxx>
- AT91RM9200-ek possible USB problem
- From: "Leon Steenkamp" <leonza@xxxxxxxxxx>
- Re: Follow-up
- From: "Andrew Victor" <avictor.za@xxxxxxxxx>
- Re: MACB driver question
- From: Erik Mouw <mouw@xxxxxxxxxxxx>
- MACB driver question
- From: "Bosko Radivojevic" <bosko.radivojevic@xxxxxxxxx>
- Re: Follow-up
- From: "Bosko Radivojevic" <bosko.radivojevic@xxxxxxxxx>
- Re: Follow-up
- From: "Ulf Samuelsson" <ulf.samuelsson@xxxxxxxxx>
- Re: Follow-up
- From: "Remy Bohmer" <linux@xxxxxxxxxx>
- Re: Follow-up
- From: "Andrew Victor" <avictor.za@xxxxxxxxx>
- Mailing List FAQ
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Mailing List Etiquette
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: Follow-up
- From: "Remy Bohmer" <linux@xxxxxxxxxx>
- Re: Request IRQ for an external Interrupt
- From: "Andrew Victor" <avictor.za@xxxxxxxxx>
- Re: AT91RM9200, linux 2.6.25-rc3, SPI dataflash
- From: "Matt Gessner" <mgessner@xxxxxxxxx>
- SD/MMC command response issue on Linux-2.6.18
- From: "Pankaj PANDEY" <pankaj.embedded@xxxxxxxxx>
- Request IRQ for an external Interrupt
- From: pavan_savoy@xxxxxxxxxxxxxx
- Re: PXA serial driver catch wrong clock enable
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- PXA serial driver catch wrong clock enable
- From: Stefan Herbrechtsmeier <hbmeier@xxxxxxxxxxxxxxxxxxxx>
- the selection of crosstool
- From: "Kevin（163）" <zhang8083@xxxxxxx>
- MLC nand flash ECC on Samsung S3C2412/S3C2413 based board
- From: "hero sun" <armhero@xxxxxxxxx>
- Re: AT91RM9200, linux 2.6.25-rc3, SPI dataflash
- From: "Matt Gessner" <mgessner@xxxxxxxxx>
- Re: AT91RM9200, linux 2.6.25-rc3, SPI dataflash
- From: "Matt Gessner" <mgessner@xxxxxxxxx>
- Re: AT91RM9200, linux 2.6.25-rc3, SPI dataflash
- From: "Ulf Samuelsson" <ulf.samuelsson@xxxxxxxxx>
- Re: AT91RM9200, linux 2.6.25-rc3, SPI dataflash
- From: "Ulf Samuelsson" <ulf.samuelsson@xxxxxxxxx>
- Re: AT91RM9200, linux 2.6.25-rc3, SPI dataflash
- From: "Matt Gessner" <mgessner@xxxxxxxxx>
- Re: AT91RM9200, linux 2.6.25-rc3, SPI dataflash
- From: Gustavo Zacarias <gustavo@xxxxxxxxxxxxxxx>
- Re: AT91RM9200, linux 2.6.25-rc3, SPI dataflash
- From: "Matt Gessner" <mgessner@xxxxxxxxx>
- Re: AT91RM9200, linux 2.6.25-rc3, SPI dataflash
- From: "Matt Gessner" <mgessner@xxxxxxxxx>
- Re: AT91RM9200, linux 2.6.25-rc3, SPI dataflash
- From: "Ulf Samuelsson" <ulf.samuelsson@xxxxxxxxx>
- arm7tdmi - NXP LPC2468 - gcc/g++/libstdc++, it's possible?
- From: "Jorge Pereira" <jpereiran@xxxxxxxxx>
- Re: AT91RM9200, linux 2.6.25-rc3, SPI dataflash
- From: "Matt Gessner" <mgessner@xxxxxxxxx>
- Re: AT91RM9200, linux 2.6.25-rc3, SPI dataflash
- From: Gustavo Zacarias <gustavo@xxxxxxxxxxxxxxx>
- Re: AT91RM9200, linux 2.6.25-rc3, SPI dataflash
- From: "Andrew Victor" <avictor.za@xxxxxxxxx>
- Re: AT91RM9200, linux 2.6.25-rc3, SPI dataflash
- From: "Matt Gessner" <mgessner@xxxxxxxxx>
- Re: AT91RM9200, linux 2.6.25-rc3, SPI dataflash
- From: "Andrew Victor" <avictor.za@xxxxxxxxx>
- AT91RM9200, linux 2.6.25-rc3, SPI dataflash
- From: "Matt Gessner" <mgessner@xxxxxxxxx>
- Re: CF-Card goes /dev/hda: but how?
- From: Andreas Kuehn <kuehn@xxxxxx>
- Re: CF-Card goes /dev/hda: but how?
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- CF-Card goes /dev/hda: but how?
- From: Andreas Kuehn <kuehn@xxxxxx>
- Re: Follow-up
- From: "Ulf Samuelsson" <ulf.samuelsson@xxxxxxxxx>
- Re: Follow-up
- From: "Ulf Samuelsson" <ulf.samuelsson@xxxxxxxxx>
- Re: How to use I2C on AT91RM9200
- From: "Ulf Samuelsson" <ulf.samuelsson@xxxxxxxxx>
- Mailing List Etiquette
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Mailing List FAQ
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: Re: Re: ARM link error in ARM Development Suite
- From: "frankxu0217" <frankxu0217@xxxxxxxxxxxx>
- Re: Follow-up
- From: "Andrew Victor" <avictor.za@xxxxxxxxx>
- Re: Follow-up
- From: "Matt Gessner" <mgessner@xxxxxxxxx>
- Re: Re: Re: ARM link error in ARM Development Suite
- From: "Kevin（163）" <zhang8083@xxxxxxx>
- Re: Re: ARM link error in ARM Development Suite
- From: "frankxu0217" <frankxu0217@xxxxxxxxxxxx>
- Re: ARM link error in ARM Development Suite
- From: "Kevin（163）" <zhang8083@xxxxxxx>
- Re: ARM link error in ARM Development Suite
- From: "Kevin（163）" <zhang8083@xxxxxxx>
- ARM link error in ARM Development Suite
- From: "frankxu0217" <frankxu0217@xxxxxxxxxxxx>
- Re: Follow-up
- From: "Andrew Victor" <avictor.za@xxxxxxxxx>
- Re: AT91RM9200, linux 2.6.24, /dev/ttyAT* and overrun errors
- From: "Matt Gessner" <mgessner@xxxxxxxxx>
- Re: AT91RM9200, linux 2.6.24, /dev/ttyAT* and overrun errors
- From: Aras Vaichas <arasv@xxxxxxxxxxxxxx>
- Follow-up
- From: "Matt Gessner" <mgessner@xxxxxxxxx>
- AT91RM9200, linux 2.6.24, /dev/ttyAT* and overrun errors
- From: "Matt Gessner" <mgessner@xxxxxxxxx>
- Hardware ECC question on Samsung S3C2413
- From: "hero sun" <armhero@xxxxxxxxx>
- Re: How to use it on AT91Rm9200
- From: Aras Vaichas <arasv@xxxxxxxxxxxxxx>
- Re: How to use I2C on AT91RM9200
- From: Aras Vaichas <arasv@xxxxxxxxxxxxxx>
- Re: Odd startup behaviour
- From: Bill Gatliff <bgat@xxxxxxxxxxxxxxx>
- Re: Odd startup behaviour
- From: Bill Gatliff <bgat@xxxxxxxxxxxxxxx>
- Re: Odd startup behaviour
- From: "Andrew Victor" <avictor.za@xxxxxxxxx>
- Re: Odd startup behaviour
- From: Bill Gatliff <bgat@xxxxxxxxxxxxxxx>
- Re: Odd startup behaviour
- From: "Matt Gessner" <mgessner@xxxxxxxxx>
- Re: Odd startup behaviour
- From: Bill Gatliff <bgat@xxxxxxxxxxxxxxx>
- Odd startup behaviour
- From: "Matt Gessner" <mgessner@xxxxxxxxxxx>
- RE: How to use I2C on AT91RM9200
- From: "Viper" <viper@xxxxxxxxxxx>
- Re: why is the simple application so large while linking it statically?
- From: "frankxu0217" <frankxu0217@xxxxxxxxxxxx>
- RE: How to use it on AT91Rm9200
- From: "Viper" <viper@xxxxxxxxxxx>
- RE: access a group of registries
- From: jl zheng <selina_zhengjl@xxxxxxxxxxx>
- access a group of registries
- From: "邹伟" <hongyualang@xxxxxxxxx>
- Re: there is no uImage
- From: "stanley.miao" <stanley.miao@xxxxxxxxxxxxx>
- Re: How to use it on AT91Rm9200
- From: Aras Vaichas <arasv@xxxxxxxxxxxxxx>
- Re: How to use it on AT91Rm9200
- From: Aras Vaichas <arasv@xxxxxxxxxxxxxx>
- Re: Re: the reboot information shows twice
- From: "frankxu0217" <frankxu0217@xxxxxxxxxxxx>
- the reboot information shows twice
- From: "frankxu0217" <frankxu0217@xxxxxxxxxxxx>
- Re: strace
- From: "frankxu0217" <frankxu0217@xxxxxxxxxxxx>
- Re: PXAFB command line for standard VGA monitor
- From: "Rex Ashbaugh" <rexa@xxxxxxxxxxxx>
- Re: usb flash drive
- From: "Rex Ashbaugh" <rexa@xxxxxxxxxxxx>
- Re: Getting kernel crash with MMC/SD stack
- From: "Rex Ashbaugh" <rexa@xxxxxxxxxxxx>
- Getting kernel crash with MMC/SD stack
- From: "Hiremath, Vaibhav" <x0059507@xxxxxx>
- How to use it on AT91Rm9200
- From: "Viper" <viper@xxxxxxxxxxx>
- strace
- From: Erdem Oguz <herdemo@xxxxxxxxx>
- Mailing List FAQ
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Mailing List Etiquette
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- RE: usb flash drive
- From: "Mo, Vincent" <vincent.mo@xxxxxxxxxxxxxxxxxx>
- Re: usb flash drive
- From: Hamish Moffatt <hamish@xxxxxxxxxxxx>
- usb flash drive
- From: "Mo, Vincent" <vincent.mo@xxxxxxxxxxxxxxxxxx>
- help:yaffs partition can't mount, no such file, with detailed problem description
- From: "frankxu0217" <frankxu0217@xxxxxxxxxxxx>
- Help! Unstable I2C driver on linux-2.6.21
- From: "Richard Cong" <gz_yhcong@xxxxxxx>
- help:yaffs partition can't mount, no such file, with detailed problem description
- From: "frankxu0217" <frankxu0217@xxxxxxxxxxxx>
- PXAFB command line for standard VGA monitor
- From: Victor <pfc@xxxxxxxxxxxxxxxxx>
- Re: Any reason not to move ARM lists to vger.kernel.org?
- From: Bernd Petrovitsch <bernd@xxxxxxxxx>
- i2c on sam9-l9260
- From: "Joep Suijs" <jsuijs@xxxxxxxxx>
- Re: Any reason not to move ARM lists to vger.kernel.org?
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: Any reason not to move ARM lists to vger.kernel.org?
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- Re: Any reason not to move ARM lists to vger.kernel.org?
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Any reason not to move ARM lists to vger.kernel.org?
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- Re: IIS audio driver for S3C2412
- From: "hero sun" <armhero@xxxxxxxxx>
- Re: IIS audio driver for S3C2412
- From: Ben Dooks <ben-linux-arm@xxxxxxxxx>
- IIS audio driver for S3C2412
- From: "hero sun" <armhero@xxxxxxxxx>
- Mailing List Etiquette
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Mailing List FAQ
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: GUI toolkit for X Window System
- From: Victor Librado <vlibrado@xxxxxxxxxxxxxxxx>
- Re: GUI toolkit for X Window System
- From: Andre Haupt <andre@xxxxxxxxxxxxxxx>
- Re: replacing consistent_sync
- From: Bill Gatliff <bgat@xxxxxxxxxxxxxxx>
- Re: GUI toolkit for X Window System
- From: Joaquim Duran <joaquinduran@xxxxxxxxxxxx>
- replacing consistent_sync
- From: Hamish Moffatt <hamish@xxxxxxxxxxxx>
- GUI toolkit for X Window System
- From: "Alan Casey" <alan.casey5@xxxxxxxxxxx>
- Re: Alternative U-Boot Console.
- From: "Tomas D." <mailsoc@xxxxxxxxx>
- RE: Alternative U-Boot Console.
- From: "John Willis" <John.Willis@xxxxxxxxxxxxxxxxx>
- Re: Alternative U-Boot Console.
- From: Andreas Schweigstill <andreas@xxxxxxxxxxxxxxx>
- Alternative U-Boot Console.
- From: Chris Gao <Chris.Gao@xxxxxxxxxxxx>
- Re: Segmentation Fault during call new [...]
- From: Andreas Schweigstill <andreas@xxxxxxxxxxxxxxx>
- Re: Segmentation Fault during call new [...]
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: Segmentation Fault during call new [...]
- From: Andreas Schweigstill <andreas@xxxxxxxxxxxxxxx>
- Re: Segmentation Fault during call new [...]
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Segmentation Fault during call new [...]
- From: Илья Пружинин <ipruzhinin@xxxxxxx>
- Re: SD Card on S3C2412/S3C2413 based board.
- From: "Mike (mwester)" <mwester@xxxxxxx>
- Re: SD Card on S3C2412/S3C2413 based board.
- From: Ben Dooks <ben-linux-arm@xxxxxxxxx>
- SD Card on S3C2412/S3C2413 based board.
- From: "hero sun" <armhero@xxxxxxxxx>
- executing code from TCM
- From: "ramya b.b" <bbramya@xxxxxxxxx>
- Re: Init problem: unable to open an initial console (busybox, udev and jffs2)
- From: Darius <augulis.darius@xxxxxxxxx>
- Init problem: unable to open an initial console (busybox, udev and jffs2)
- From: Darius <augulis.darius@xxxxxxxxx>
- there is no uImage
- From: "ruckus mallard" <ruckuus@xxxxxxxxx>
- Re: newbie question about compiling kernel
- From: "ruckus mallard" <ruckuus@xxxxxxxxx>
- Re: newbie question about compiling kernel
- From: Aras Vaichas <arasv@xxxxxxxxxxxxxx>
- Re: newbie question about compiling kernel
- From: Adrian Bunk <bunk@xxxxxxxxxx>
- Re: newbie question about compiling kernel
- From: Andreas Schweigstill <andreas@xxxxxxxxxxxxxxx>
- newbie question about compiling kernel
- From: "ruckus mallard" <ruckuus@xxxxxxxxx>
- Mailing List FAQ
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Mailing List Etiquette
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: iMx27: boot stops after "booting the kernel, done."
- From: Bill Gatliff <bgat@xxxxxxxxxxxxxxx>
- Re: iMx27: boot stops after "booting the kernel, done."
- From: Aigor <igt1972@xxxxxxxxx>
- Re: [uClinux-dev] Soft lockup 2.6.23.14-uc0
- From: Doug Kehn <rdkehn@xxxxxxxxx>
- Re: [uClinux-dev] Soft lockup 2.6.23.14-uc0
- From: "Gilles Chanteperdrix" <gilles.chanteperdrix@xxxxxxxxx>
- Fwd: [uClinux-dev] Soft lockup 2.6.23.14-uc0
- From: Doug Kehn <rdkehn@xxxxxxxxx>
- Re: Is Fast Address space switching enabled in kernel arm port?
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
- Is Fast Address space switching enabled in kernel arm port?
- From: Max Stirling <vicky.irobot@xxxxxxxxx>
- Re: SPAM-LOW: Re: What was the last kernel version and patch to support ARM7TDMI with no MMU and Atmel AT91
- From: Robert Warner <rwarner@xxxxxxxxxxxxxxxxxxx>
- Re: SPAM-LOW: Re: What was the last kernel version and patch to support ARM7TDMI with no MMU and Atmel AT91
- From: Robert Warner <rwarner@xxxxxxxxxxxxxxxxxxx>
- Re: SPAM-LOW: Re: What was the last kernel version and patch to support ARM7TDMI with no MMU and Atmel AT91
- From: Robert Warner <rwarner@xxxxxxxxxxxxxxxxxxx>
- Re: What was the last kernel version and patch to support ARM7TDMI with no MMU and Atmel AT91
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
- Re: Read only CF card
- From: Bill Gatliff <bgat@xxxxxxxxxxxxxxx>
- Re: What was the last kernel version and patch to support ARM7TDMI with no MMU and Atmel AT91
- From: Robert Warner <rwarner@xxxxxxxxxxxxxxxxxxx>