[Prev Page][Next Page]
- Re: at91rm9200 multicast bug?
- From: Aras Vaichas <arasv@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: at91rm9200 multicast bug?
- From: "Ulf Samuelsson" <ulfs@xxxxxx>
- Re: at91rm9200 multicast bug?
- From: Aras Vaichas <arasv@xxxxxxxxxxxxxxxxxxxxxxx>
- Clock Divider values for slow I2C Bus (on DK Board)
- From: Richard Wenzel <Rotarn@xxxxxx>
- Re: Latest kernel for Intel PXA270
- From: Nicolas Pitre <nico@xxxxxxx>
- Latest kernel for Intel PXA270
- From: "kentropy" <kentropy@xxxxxxxxx>
- Re: debug programs
- From: Erik Mouw <erik@xxxxxxxxxxxx>
- debug programs
- From: Christian Boon <c.boon@xxxxxxxxxxxxxxxxxxxx>
- Re: question about loading binaries
- From: Erik Mouw <erik@xxxxxxxxxxxx>
- PXA270 Camera interface
- From: Bart Jonkers <jonkersbart@xxxxxxxxx>
- Re: question about loading binaries
- From: Koenraad Lelong <arm-linux@xxxxxxxxxxxxxxxxxx>
- Re: Kernel fails to boot
- From: Erik Mouw <erik@xxxxxxxxxxxx>
- Re: Adding a new IRQ no
- From: Erik Mouw <erik@xxxxxxxxxxxx>
- Re: question about loading binaries
- From: Erik Mouw <erik@xxxxxxxxxxxx>
- Kernel fails to boot
- From: "Project Trainees\(Embedded/Harita\)" <projecttrainees@xxxxxxxxxx>
- Adding a new IRQ no
- From: Sushant Kumar Mishra <skm_online@xxxxxxxxxxx>
- Re: Problems using I2c Bus Interace
- From: Richard Wenzel <Rotarn@xxxxxx>
- question about loading binaries
- From: Koenraad Lelong <arm-linux@xxxxxxxxxxxxxxxxxx>
- Toolchain select
- From: "Li Weichen" <iaadoa@xxxxxxxxx>
- Re: Problems using I2c Bus Interace
- From: Richard Wenzel <Rotarn@xxxxxx>
- Re: Problems using I2c Bus Interace
- From: Richard Wenzel <Rotarn@xxxxxx>
- Re: Problems using I2c Bus Interace
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: Problems using I2c Bus Interace
- From: Ben Dooks <ben-linux-arm@xxxxxxxxx>
- Re: Problems using I2c Bus Interace
- From: Ben Dooks <ben-linux-arm@xxxxxxxxx>
- Re: Problems using I2c Bus Interace
- From: Richard Wenzel <Rotarn@xxxxxx>
- Re: Problems using I2c Bus Interace
- From: David Mayes <davidm@xxxxxxxxxxx>
- Problem with Bad block table creation
- From: Pramod P K <pra.engr@xxxxxxxxx>
- flash id read problem...
- From: Sudhakar Swaminathan <swami91@xxxxxxxxx>
- Re: Problems using I2c Bus Interace
- From: Richard Wenzel <Rotarn@xxxxxx>
- Re: mmc and pio in kernel 2.6.14 and initialization question
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: Problems using I2c Bus Interace
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Bootloader for the 2.6 Kernel on a Lubbock (Intel PXA55)
- From: Justin Treon <justin_treon@xxxxxxxxx>
- problem while uncompressing Linux image
- From: "Project Trainees\(Embedded/Harita\)" <projecttrainees@xxxxxxxxxx>
- problem while uncompressing Linux image
- From: "Project Trainees\(Embedded/Harita\)" <projecttrainees@xxxxxxxxxx>
- Re: Question about inodes and dev
- From: Roman <romank@xxxxxxxxxxxxx>
- Re: Is there a better way to define scratch registers in Extended Asm?
- From: Nicolas Pitre <nico@xxxxxxx>
- Re: cross compilation for ixp425 ?
- From: alfred hitch <alfred.hitch@xxxxxxxxx>
- mmc and pio in kernel 2.6.14 and initialization question
- From: Roman <romank@xxxxxxxxxxxxx>
- Problems using I2c Bus Interace
- From: Richard Wenzel <Rotarn@xxxxxx>
- Is there a better way to define scratch registers in Extended Asm?
- From: Marc Singer <elf@xxxxxxxxx>
- wireless network card on OSK5912
- From: "xuxian" <lsfdxuxian@xxxxxxxxx>
- How to understand "add r0, pc, #-(8+.-StackData)"
- From: Robin Steven <armrobin@xxxxxxxxx>
- Re: Question about inodes and dev
- From: Carlo Agrusti <carlo-ag@xxxxxxxxx>
- Question about inodes and dev
- From: Roman <romank@xxxxxxxxxxxxx>
- Re: Info on making AACI primecell PL401 sound support for arm-linux!
- From: Raja Mallik <raja.mallik@xxxxxxxxxxx>
- Re: Info on making AACI primecell PL401 sound support for arm-linux!
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
- Re: "pxareg like" tool for iMX
- From: Robert Schwebel <robert@xxxxxxxxxxx>
- Re: "pxareg like" tool for iMX
- From: julien.boibessot@xxxxxxx
- Re: "pxareg like" tool for iMX
- From: Robert Schwebel <robert@xxxxxxxxxxx>
- Re: Info on making AACI primecell PL401 sound support for arm-linux!
- From: Raja Mallik <raja.mallik@xxxxxxxxxxx>
- "pxareg like" tool for iMX
- From: julien.boibessot@xxxxxxx
- Re: Info on making AACI primecell PL401 sound support for arm-linux!
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
- cross compile rt2500 driver for 2.4.21?
- From: "Stephen Beaver" <sbeaver@xxxxxxxxxxxxxxx>
- Re: D-Link DWL-G122 on arm
- From: Stephen Beaver <sbeaver@xxxxxxxxxxxxxxx>
- Re: D-Link DWL-G122 on arm
- From: Andy Gatward <agatward@xxxxxxxxxxxxx>
- Re: Info on making AACI primecell PL401 sound support for arm-linux!
- From: Liam Girdwood <liam.girdwood@xxxxxxxxxxxxxxxx>
- Info on making AACI primecell PL401 sound support for arm-linux!
- From: Raja Mallik <raja.mallik@xxxxxxxxxxx>
- Paid support ?
- From: Chris C <ccaml@xxxxxxxxxxxxx>
- Re: s3c2410 Illegal instruction
- From: Ben Dooks <ben-linux-arm@xxxxxxxxx>
- MTD Installation problem
- From: "Project Trainees\(Embedded/Harita\)" <projecttrainees@xxxxxxxxxx>
- Re: AT91RM9200 serial ports
- From: "Ulf Samuelsson" <ulfs@xxxxxx>
- Re: AT91RM9200 serial ports
- From: Andy Gatward <agatward@xxxxxxxxxxxxx>
- Re: AT91RM9200 serial ports
- From: Camilo Alejandro Arboleda <mislistas.correo@xxxxxxxxx>
- Re: zlib
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- zlib
- From: "Project Trainees\(Embedded/Harita\)" <projecttrainees@xxxxxxxxxx>
- Re: AT91RM9200 serial ports
- From: Bennett SH Wai <ben@xxxxxxxxxxxxx>
- s3c2410 Illegal instruction
- From: Виталий Столяров <svitaliy77@xxxxxxx>
- compiling linux-2.6.0 for pxa250
- From: Vinay H Patil <vinaypatil@xxxxxxxxxxxxx>
- Re: unable to start kernel image.....help
- From: Komal Shah <komal_shah802003@xxxxxxxxx>
- unable to start kernel image.....help
- From: "Project Trainees\(Embedded/Harita\)" <projecttrainees@xxxxxxxxxx>
- Re: toolchain for arm
- From: Steven Geerts <Steven.geerts@xxxxxxxxxxx>
- Re: toolchain for arm
- From: Dimitry Andric <dimitry@xxxxxxxxxx>
- toolchain for arm
- From: Steven Geerts <Steven.geerts@xxxxxxxxxxx>
- Re: AT91RM9200 serial ports
- From: Andreas Schweigstill <andreas@xxxxxxxxxxxxxxx>
- AT91RM9200 serial ports
- From: Camilo Alejandro Arboleda <mislistas.correo@xxxxxxxxx>
- Re: USB hotplug in 2.6 - how to make it running?
- From: Andreas Schweigstill <andreas@xxxxxxxxxxxxxxx>
- USB hotplug in 2.6 - how to make it running?
- From: janiszo@xxxxxxxxxxxxxx
- Re: Permissions Error Patching Kernel for ARMCore in Ubuntu
- From: Imre Deak <imre.deak@xxxxxxxxx>
- Re: Permissions Error Patching Kernel for ARMCore in Ubuntu
- From: Dimitry Andric <dimitry@xxxxxxxxxx>
- Permissions Error Patching Kernel for ARMCore in Ubuntu
- From: Nathan M <ngmlinux@xxxxxxxxx>
- Re: PXA Serial debug advice
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- PXA Serial debug advice
- From: David Farrell <davidjf2001@xxxxxxxxx>
- Re: Query regarding loading Linux on ARM926EJ-S
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
- Re: linux on ARM926EJ-S
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
- linux on ARM926EJ-S
- From: ritu garg <ritu2721a@xxxxxxxxx>
- Re: AT91RM9200EK Linux Installation Questions/Please Help
- From: "Marcus Nissemark" <marcus.nissemark@xxxxxxxxxx>
- Linux on AT91Rm9200EK installation question
- From: romank@xxxxxxxxxxxxx
- AT91RM9200EK Linux Installation Questions/Please Help
- From: romank@xxxxxxxxxxxxx
- rootfs mount problem
- From: Sudhakar Swaminathan <swami91@xxxxxxxxx>
- Query regarding loading Linux on ARM926EJ-S
- From: ritu garg <ritu2721a@xxxxxxxxx>
- Re: Query : regarding working with the RVD on Versatile Baseboard
- From: Erik Mouw <erik@xxxxxxxxxxxx>
- Re: Linux on ARM1136EJ-S
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: Linux on ARM1136EJ-S
- From: Komal Shah <komal_shah802003@xxxxxxxxx>
- Linux on ARM1136EJ-S
- From: Nikolai Daskalov <ndaskalov@xxxxxxxxxxxxx>
- Re: Can the driver of a wlan card for PC be used in embedded sytems?
- From: Andy Gatward <agatward@xxxxxxxxxxxxx>
- Re: kernel compilation error
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: kernel compilation error
- From: Gianluca <icjtqr@xxxxxx>
- kernel compilation error
- From: Sushant Kumar Mishra <skm_online@xxxxxxxxxxx>
- Re: Can the driver of a wlan card for PC be used in embedded sytems?
- From: Stephen Beaver <sbeaver@xxxxxxxxxxxxxxx>
- Re: Can the driver of a wlan card for PC be used in embedded sytems?
- From: Andy Gatward <agatward@xxxxxxxxxxxxx>
- Re: Can the driver of a wlan card for PC be used in embedded sytems?
- From: Andy Gatward <agatward@xxxxxxxxxxxxx>
- RE: Can the driver of a wlan card for PC be used in embedded sytems?
- From: "Li Weichen" <iaadoa@xxxxxxxxx>
- Query : regarding working with the RVD on Versatile Baseboard
- From: ritu garg <ritu2721a@xxxxxxxxx>
- Can the driver of a wlan card for PC be used in embedded sytems?
- From: "Li Weichen" <iaadoa@xxxxxxxxx>
- Re: user plane read protection checked from kernel plane ?
- From: Erik Mouw <erik@xxxxxxxxxxxx>
- Static zlib library
- From: "Project Trainees\(Embedded/Harita\)" <projecttrainees@xxxxxxxxxx>
- user plane read protection checked from kernel plane ?
- From: alfred hitch <alfred.hitch@xxxxxxxxx>
- Re: Help to compile NFS Root filesystem for custom ARM based board
- From: Aras Vaichas <arasv@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: Help to compile NFS Root filesystem for custom ARM based board
- From: Michael Goodenough <mlgoodenough@xxxxxxxxx>
- (no subject)
- From: "mradha" <mradha@xxxxxxxxx>
- Re: Help to compile NFS Root filesystem for custom ARM based board
- From: Wolfgang Denk <wd@xxxxxxx>
- Re: Help to compile NFS Root filesystem for custom ARM based board
- From: Aras Vaichas <arasv@xxxxxxxxxxxxxxxxxxxxxxx>
- Help to compile NFS Root filesystem for custom ARM based board
- From: Michael Goodenough <mlgoodenough@xxxxxxxxx>
- Re: assembler ldr instruction and the '=' specifier
- From: Benjamin Sapp <bsapp@xxxxxxxx>
- Re: assembler ldr instruction and the '=' specifier
- From: Ian Campbell <ijc@xxxxxxxxxxxxxx>
- assembler ldr instruction and the '=' specifier
- From: Benjamin Sapp <bsapp@xxxxxxxx>
- Slow echo?
- From: Takács Áron <takacs.aron@xxxxxxxxxxxx>
- u-boot and serial console problem
- From: Wen Tony <wen.zju@xxxxxxxxx>
- problems on building root filesystem using scratchbox and meamo
- From: "xuxian" <lsfdxuxian@xxxxxxxxx>
- SOT: Looking for Free Software developers willing to give a talk at the Fosdem embedded devroom
- From: Philippe De Swert <Philippedeswert@xxxxxxxxxx>
- Re: Welcome to the
- From: Bob Wirka <bobwirka@xxxxxxxxxxxx>
- RE: Welcome to the
- From: "mradha" <mradha@xxxxxxxxx>
- Re: Java VM for ARM Xscale big endian?
- From: Lennert Buytenhek <buytenh@xxxxxxxxxxxxxx>
- Java VM for ARM Xscale big endian?
- From: Chris Develder <chris.develder@xxxxxxxxxxxxxx>
- cross compilation for ixp425 ?
- From: alfred hitch <alfred.hitch@xxxxxxxxx>
- Re: insmod source code ?
- From: Lennert Buytenhek <buytenh@xxxxxxxxxxxxxx>
- Re: insmod source code ?
- From: Peter Menzebach <pm-armlist@xxxxxxxxxxx>
- insmod source code ?
- From: alfred hitch <alfred.hitch@xxxxxxxxx>
- Re: Why this error occured when I run my program on AT91RM9200 board?
- From: Aras Vaichas <arasv@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: Some basic questions about gtk/gtk+ in embedded system
- From: edward.robbins@xxxxxxxxxxxxxxx
- Why this error occured when I run my program on AT91RM9200 board?
- From: 李 志浩 <lzhtiger@xxxxxxxxxxx>
- RE: How to make a root filesystem?
- From: 李 志浩 <lzhtiger@xxxxxxxxxxx>
- Re: How to make a root filesystem ?
- From: "Carlos Manuel Duclos Vergara" <carlos@xxxxxxxxxxx>
- Re: How to make a root filesystem ?
- From: ramprasad <ramprasad@xxxxxxxxxxxxx>
- RE: How to make a root filesystem ?
- From: "Jin-Wha Ryu" <eady@xxxxxxxx>
- How to make a root filesystem ?
- From: 李 志浩 <lzhtiger@xxxxxxxxxxx>
- Re: mcr instruction meaning
- From: "kentropy" <kentropy@xxxxxxxxx>
- Re: How to tell CPU mhz on OMAP2420?
- From: Komal Shah <komal_shah802003@xxxxxxxxx>
- How to tell CPU mhz on OMAP2420?
- From: Ioi Lam <Ioi.Lam@xxxxxxx>
- Re: pxa255 and usleep resolution
- From: Nicolas Pitre <nico@xxxxxxx>
- Re: Some basic questions about gtk/gtk+ in embedded system
- From: Florian Boor <florian.boor@xxxxxxxxxxxxxxxxx>
- Re: mcr instruction meaning
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
- Re: mcr instruction meaning
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: pxa255 and usleep resolution
- From: Peter Menzebach <pm-armlist@xxxxxxxxxxx>
- Some basic questions about gtk/gtk+ in embedded system
- From: "Li Weichen" <iaadoa@xxxxxxxxx>
- Re: [OT] ARM Linux development boards
- From: Leon Woestenberg <leonw@xxxxxxxxxxx>
- mcr instruction meaning
- From: "kentropy" <kentropy@xxxxxxxxx>
- Re: pxa255 and usleep resolution
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- RE: pxa255 and usleep resolution
- From: Björn Östby <Bjorn.Ostby@xxxxxxxxxxxxxxxxxxxx>
- Re: pxa255 and usleep resolution(time mgmt in linux)
- From: Michał Strasburger <m_strasburger@xxxxxxxxx>
- RE: Static zlib library
- From: "Project Trainees\(Embedded/Harita\)" <projecttrainees@xxxxxxxxxx>
- Re: Static zlib library
- From: Vinod Joseph <vinod.joe@xxxxxxxxx>
- Re: pxa255 and usleep resolution
- From: Kim Fredenberg <lists@xxxxxxxxxxxxx>
- Re:Static zlib library
- From: "Project Trainees\(Embedded/Harita\)" <projecttrainees@xxxxxxxxxx>
- Re: pxa255 and usleep resolution
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: pxa255 and usleep resolution
- From: Dimitry Andric <dimitry@xxxxxxxxxx>
- Re: Static zlib library
- From: Vinod Joseph <vinod.joe@xxxxxxxxx>
- pxa255 and usleep resolution
- From: Kim Fredenberg <lists@xxxxxxxxxxxxx>
- USB webcam help needed
- From: Madis Listak <madis.listak@xxxxxxx>
- Static zlib library
- From: "Project Trainees\(Embedded/Harita\)" <projecttrainees@xxxxxxxxxx>
- lm8v31 lcd registers
- From: Anders <dizzey@xxxxxxxxxx>
- Re: [OT] ARM Linux development boards
- From: Lennert Buytenhek <buytenh@xxxxxxxxxxxxxx>
- Re: [OT] ARM Linux development boards
- From: Shakthi Kannan <shakstux@xxxxxxxxx>
- Re: ethernet gadget MAC/IP allocation
- From: Aras Vaichas <arasv@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: [OT] ARM Linux development boards
- From: "Jason Farque" <jfarque@xxxxxxxxxxxxxxxx>
- Re: ethernet gadget MAC/IP allocation
- From: Robert Schwebel <robert@xxxxxxxxxxx>
- ethernet gadget MAC/IP allocation
- From: Aras Vaichas <arasv@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: VFP and SIGFPE
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [OT] ARM Linux development boards
- From: "Ulf Samuelsson" <ulfs@xxxxxx>
- Re: anybody using kdrive / tinyx?
- From: Robert Schwebel <robert@xxxxxxxxxxx>
- VFP and SIGFPE
- From: Ioi Lam <Ioi.Lam@xxxxxxx>
- Re: [OT] ARM Linux development boards
- From: Ioi Lam <Ioi.Lam@xxxxxxx>
- [OT] ARM Linux development boards
- From: Shakthi Kannan <shakstux@xxxxxxxxx>
- Re: Re: mknod creation under kernel space
- From: "Garimella Srinivasu" <srinu_garimella@xxxxxxxxxxxxxx>
- __alloc_pages: 0-order allocation failed (gfp=0x1d2/0)
- From: HS8JCV <hs8jcv@xxxxxxxxx>
- Re: tool chain
- From: Allan Clark <allanc@xxxxxxxxxxxxxxxxxx>
- Downporting from 2.6.14 to 2.6.9
- From: Bahadir Balban <bahadir.balban@xxxxxxxxx>
- Re: mknod creation under kernel space
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- mknod creation under kernel space
- From: "Garimella Srinivasu" <srinu_garimella@xxxxxxxxxxxxxx>
- Re: tool chain
- From: Jean Lee <jean.lee@xxxxxxx>
- tool chain
- From: Sushant Kumar Mishra <skm_online@xxxxxxxxxxx>
- Re: Unknown data abort handler type
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Unknown data abort handler type
- From: Pramod P K <pra.engr@xxxxxxxxx>
- Re: ARM920T cross compilation tools for linux 2.6.14 and crosstool-0.38
- From: Jean Lee <jean.lee@xxxxxxx>
- s3c2410 usb gadget
- From: Виталий Столяров <svitaliy77@xxxxxxx>
- ARM920T cross compilation tools for linux 2.6.14 and crosstool-0.38
- From: Jean Lee <jean.lee@xxxxxxx>
- Porting Linux to ARM920T
- From: Savaş Yatmaz <syatmaz@xxxxxxxxx>
- Re: AT91RM9200DK patch for 2.6.9 kernel version
- From: Eric BENARD / Free <ebenard@xxxxxxx>
- Re: AT91RM9200DK patch for 2.6.9 kernel version
- From: Peter Menzebach <pm-armlist@xxxxxxxxxxx>
- Re: AT91RM9200DK patch for 2.6.9 kernel version
- From: "Ulf Samuelsson" <ulfs@xxxxxx>
- AT91RM9200DK patch for 2.6.9 kernel version
- From: Sushant Kumar Mishra <skm_online@xxxxxxxxxxx>
- i2c false detection problem
- From: Aras Vaichas <arasv@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: value of drive->id->dma_ultra and HWIF(drive)->udma_four
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- anybody using kdrive / tinyx?
- From: Michael Burian <dynmail1@xxxxxxxxxxxxxxxxx>
- looking for new patches
- From: prashant sangal <prashantsangal@xxxxxxxxxxx>
- Ethernet MII - Special handling - Switch chip
- From: Manfred Gruber <m.gruber@xxxxxxxxx>
- value of drive->id->dma_ultra and HWIF(drive)->udma_four
- From: "Liau.Cloud" <Cloud.Liau@xxxxxxxxxxxx>
- at91rm9200 multicast bug?
- From: 董承栋 <oyefer@xxxxxxxxx>
- Re: Question on Versatile AHB M1 bus
- From: "Jason Chang" <jchang@xxxxxxxxxxxxxx>
- Re: Question on Versatile AHB M1 bus
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
- Re: setting xfermode to 68 (UltraDMide2: Speed warnings UDMA 3/4/5 is not functional.
- From: Erik Mouw <erik@xxxxxxxxxxxx>
- Re: microwin-sun-11_jun_2002.tar compilation problem
- From: Erik Mouw <erik@xxxxxxxxxxxx>
- setting xfermode to 68 (UltraDMide2: Speed warnings UDMA 3/4/5 is not functional.
- From: "Liau.Cloud" <Cloud.Liau@xxxxxxxxxxxx>
- Re: microwin-sun-11_jun_2002.tar compilation problem
- From: Eric BENARD / Free <ebenard@xxxxxxx>
- microwin-sun-11_jun_2002.tar compilation problem
- From: Sushant Kumar Mishra <skm_online@xxxxxxxxxxx>
- Re: how to compile
- From: Michael Burian <dynmail1@xxxxxxxxxxxxxxxxx>
- Re: Vfs :unable to mount rootfs
- From: Aras Vaichas <arasv@xxxxxxxxxxxxxxxxxxxxxxx>
- RE: Vfs :unable to mount rootfs
- From: Prafulla WADASKAR <prafulla.wadaskar@xxxxxx>
- Re: Vfs :unable to mount rootfs
- From: Aras Vaichas <arasv@xxxxxxxxxxxxxxxxxxxxxxx>
- Vfs :unable to mount rootfs
- From: arif lateef <arif.lateef@xxxxxxxxx>
- Fw: Question on Versatile AHB M1 bus
- From: "Jason Chang" <jchang@xxxxxxxxxxxxxx>
- how to compile
- From: prashant sangal <prashantsangal@xxxxxxxxxxx>
- how to compile
- From: prashant sangal <prashantsangal@xxxxxxxxxxx>
- how to compile
- From: prashant sangal <prashantsangal@xxxxxxxxxxx>
- Question on Versatile AHB M1 bus
- From: "Jason Chang" <jchang@xxxxxxxxxxxxxx>
- AT91RM9200 Ethernet problems when communicating over an Ethernet switch
- From: "Ulf Samuelsson" <ulf@xxxxxxxxx>
- executable corruption ?
- From: alfred hitch <alfred.hitch@xxxxxxxxx>
- Is there any widely used ramdisk that can co-operate with cross-2.95.3
- From: "jack chen" <jackchen81@xxxxxxxxx>
- Re: Atmel csb337 evaluation board
- From: Vinod Joseph <vinod.joe@xxxxxxxxx>
- Atmel csb337 evaluation board
- From: Sushant Kumar Mishra <skm_online@xxxxxxxxxxx>
- Re: Question about a new AT91RM9200 design
- From: Aras Vaichas <arasv@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: Question about a new AT91RM9200 design
- From: Andy Gatward <agatward@xxxxxxxxxxxxx>
- Re: Linux-arm Digest, Vol 28, Issue 27
- From: Duane Ellis <duane_ellis@xxxxxxxxxxxx>
- Re: Question about a new AT91RM9200 design
- From: Andy Gatward <agatward@xxxxxxxxxxxxx>
- RE: Question about a new AT91RM9200 design
- From: "Paul Blacquiere" <p_blacquiere@xxxxxxxxxxx>
- Question about a new AT91RM9200 design
- From: Andy Gatward <agatward@xxxxxxxxxxxxx>
- Re: doubt in Static Builds
- From: Lennert Buytenhek <buytenh@xxxxxxxxxxxxxx>
- doubt in Static Builds
- From: Pramod P K <pra.engr@xxxxxxxxx>
- Re: doubt in Static Builds
- From: Vinod Joseph <vinod.joe@xxxxxxxxx>
- Re: XFree86-4.5.0 for arm
- From: Vinod Joseph <vinod.joe@xxxxxxxxx>
- Re: doubt in Static Builds
- From: Peter Menzebach <pm-armlist@xxxxxxxxxxx>
- Re: AT91RM9200 I2C code broken !? in kernel 2.6.12
- From: Achim Ehrlich <aehrlich@xxxxxxxxx>
- doubt in Static Builds
- From: Pramod P K <pra.engr@xxxxxxxxx>
- Re: Re: how to rum scripts on minicom
- From: "Sandeep Thakkar" <sandeep_thakkar1@xxxxxxxxxxxxxx>
- Re: how to rum scripts on minicom
- From: Robert Schwebel <robert@xxxxxxxxxxx>
- Re: how to rum scripts on minicom
- From: Baurzhan Ismagulov <ibr@xxxxxxxxxxxxxxxxx>
- Re: how to rum scripts on minicom
- From: Michael Burian <dynmail1@xxxxxxxxxxxxxxxxx>
- OSK5912 USB Port Problem
- From: "xuxian" <lsfdxuxian@xxxxxxxxx>
- Re: AT91RM9200 I2C code broken !? in kernel 2.6.12
- From: Richard Wenzel <Rotarn@xxxxxx>
- how to rum scripts on minicom
- From: prashant sangal <prashantsangal@xxxxxxxxxxx>
- Where to get usb 2.0 driver?
- From: "Li Weichen" <iaadoa@xxxxxxxxx>
- XFree86-4.5.0 for arm
- From: Sushant Kumar Mishra <skm_online@xxxxxxxxxxx>
- 16MB RAM support in blob
- From: ramprasad <ramprasad@xxxxxxxxxxxxx>
- mtd for 2.4.18
- From: "Πρ Φά" <zhoxu@xxxxxxxxxxx>
- How to implement a 802.11g wlan with a usb interface for omap5912?
- From: "Li Weichen" <iaadoa@xxxxxxxxx>
- Re: AT91RM9200 I2C code broken !? in kernel 2.6.12
- From: "Richard Wenzel" <Rotarn@xxxxxx>
- Re: Illegal instruction
- From: Pramod P K <pra.engr@xxxxxxxxx>
- Re: AT91RM9200 I2C code broken !? in kernel 2.6.12
- From: Aras Vaichas <arasv@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: AT91RM9200 I2C code broken !? in kernel 2.6.12
- From: Eric BENARD / Free <ebenard@xxxxxxx>
- RE: tftp setting problem for ARM-linux help............
- From: "karthik Gopalakrishnan" <karthikgopalakrishnan@xxxxxxxxxxx>
- plz answer ASAP
- From: prashant sangal <prashantsangal@xxxxxxxxxxx>
- Re: Illegal instruction
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: tftp setting problem for ARM-linux help............
- From: Richard Wenzel <Rotarn@xxxxxx>
- tftp setting problem for ARM-linux help............
- From: "Harshapvstus" <harsha@xxxxxxx>
- AT91RM9200 I2C code broken !? in kernel 2.6.12
- From: ritchie <Rotarn@xxxxxx>
- RE: Reboot How To
- From: "Stephen Beaver" <sbeaver@xxxxxxxxxxxxxxx>
- Re: Source Code debugging for ARM (target/host config)
- From: ritchie <Rotarn@xxxxxx>
- Re: Source Code debugging for ARM (target/host config)
- From: "Philippe De Swert" <philippedeswert@xxxxxxxxxx>
- Re: Source Code debugging for ARM (target/host config)
- From: Peter Menzebach <pm-armlist@xxxxxxxxxxx>
- Re: Source Code debugging for ARM (target/host config)
- From: ritchie <Rotarn@xxxxxx>
- Fixed the error---Thanx all
- From: Pramod P K <pra.engr@xxxxxxxxx>
- Reboot How To
- From: "chandrasekar" <chandrasekar@xxxxxxxxxxxxxxxx>
- Re: Source Code debugging for ARM
- From: Carlo Agrusti <carlo-ag@xxxxxxxxx>
- Re: Illegal instruction
- From: Pramod P K <pra.engr@xxxxxxxxx>
- Problem on mounting a jffs2 rootfs image
- From: "xuxian" <lsfdxuxian@xxxxxxxxx>
- netflash, insufficient memory for image
- From: Andrew Muro <andrewdangermuro@xxxxxxxxx>
- Re: Source Code debugging for ARM
- From: ritchie <Rotarn@xxxxxx>
- Re: window in linux
- From: Harald Krammer <Harald.Krammer@xxxxxx>
- RE: Source Code debugging for ARM
- From: "Stephen Beaver" <sbeaver@xxxxxxxxxxxxxxx>
- Re: Source Code debugging for ARM
- From: Martin Zwickel <martin.zwickel@xxxxxxxxxxxxxx>
- Source Code debugging for ARM
- From: ritchie <Rotarn@xxxxxx>
- cs89x0 driver question
- From: Aitor Garcia <carrierphasejitter@xxxxxxxxx>
- cs89x0 driver question
- From: Aitor Garcia <carrierphasejitter@xxxxxxxxx>
- Re: pppd for arm
- From: Peter Menzebach <pm-armlist@xxxxxxxxxxx>
- Re: pppd for arm
- From: Steven Geerts <Steven.geerts@xxxxxxxxxxx>
- Re: pppd for arm
- From: Steven Geerts <Steven.geerts@xxxxxxxxxxx>
- Re: pppd for arm
- From: Peter Menzebach <pm-armlist@xxxxxxxxxxx>
- Re: window in linux
- From: Gianluca <icjtqr@xxxxxx>
- Re: info on amba in 2.6.12
- From: Shakthi Kannan <shakstux@xxxxxxxxx>
- window in linux
- From: Sushant Kumar Mishra <skm_online@xxxxxxxxxxx>
- RE: pppd for arm
- From: Steven Geerts <Steven.geerts@xxxxxxxxxxx>
- Re: What all should I take care while compiling and running?
- From: Pramod P K <pra.engr@xxxxxxxxx>
- RE: What all should I take care while compiling and running?
- From: "Chuck Meade" <chuckmeade@xxxxxxxxxxxxxx>
- Re: Illegal instruction
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- RE: What all should I take care while compiling and running?
- From: "Chuck Meade" <chuckmeade@xxxxxxxxxxxxxx>
- Illegal instruction
- From: Pramod P K <pra.engr@xxxxxxxxx>
- info on amba in 2.6.12
- From: Shakthi Kannan <shakstux@xxxxxxxxx>
- Re: What all should I take care while compiling and running?
- From: Pramod P K <pra.engr@xxxxxxxxx>
- RE: pppd for arm
- From: Prafulla WADASKAR <prafulla.wadaskar@xxxxxx>
- Re: FW: Problem with I2C EEPROM (could not read anything)
- From: ritchie <Rotarn@xxxxxx>
- Re: How to access physical address directly from user application in Linux 2.6?
- From: Louis Croisez <louis.croisez@xxxxxxxxx>
- Help about making jffs2 file system
- From: "Li Weichen" <iaadoa@xxxxxxxxx>
- Re: How to access physical address directly from user application in Linux 2.6?
- From: Michael Burian <dynmail1@xxxxxxxxxxxxxxxxx>
- Re: What all should I take care while compiling and running?
- From: Allan Clark <allanc@xxxxxxxxxxxxxxxxxx>
- RE: What all should I take care while compiling and running?
- From: "Chuck Meade" <chuckmeade@xxxxxxxxxxxxxx>
- How to access physical address directly from user application in Linux 2.6?
- From: Xin Xing <xing_xin@xxxxxxxxx>
- Re: Problem with I2C EEPROM (could not read anything)
- From: Aras Vaichas <arasv@xxxxxxxxxxxxxxxxxxxxxxx>
- RE: What all should I take care while compiling and running?
- From: "Chuck Meade" <chuckmeade@xxxxxxxxxxxxxx>
- RE: What all should I take care while compiling and running?
- From: "Chuck Meade" <chuckmeade@xxxxxxxxxxxxxx>
- pppd for arm
- From: Steven Geerts <Steven.geerts@xxxxxxxxxxx>
- Problem with I2C EEPROM (could not read anything)
- From: "Richard Wenzel" <Rotarn@xxxxxx>
- RE: What all should I take care while compiling and running?
- From: "Chuck Meade" <chuckmeade@xxxxxxxxxxxxxx>
- Re: console port error
- From: Eric BENARD / Free <ebenard@xxxxxxx>
- Re: console port error
- From: Sushant Kumar Mishra <skm_online@xxxxxxxxxxx>
- Re: console port error
- From: Sushant Kumar Mishra <skm_online@xxxxxxxxxxx>
- Re: console port error
- From: Eric BENARD / Free <ebenard@xxxxxxx>
- Re: console port error
- From: Peter Menzebach <pm-armlist@xxxxxxxxxxx>
- Re: What all should I take care while compiling and running?
- From: Waqqas Jabbar <waqqas.jabbar@xxxxxxxxx>
- console port error
- From: Sushant Kumar Mishra <skm_online@xxxxxxxxxxx>
- Re: script error
- From: Eric BENARD / Free <ebenard@xxxxxxx>
- script error
- From: Sushant Kumar Mishra <skm_online@xxxxxxxxxxx>
- Re: What all should I take care while compiling and running?
- From: Dan Kegel <dank@xxxxxxxxx>
- What all should I take care while compiling and running?
- From: Pramod P K <pra.engr@xxxxxxxxx>
- 3.4.4 can anybody please !!!!!!!! help
- From: "VikramB" <vikramb@xxxxxxxxx>
- How to use i2cdetect
- From: "Richard Wenzel" <Rotarn@xxxxxx>
- Re: Software FP and Hardware FP
- From: Waqqas Jabbar <waqqas.jabbar@xxxxxxxxx>
- Re: Software FP and Hardware FP
- From: Allan Clark <allanc@xxxxxxxxxxxxxxxxxx>
- RE: arm linux new bee (Vamsi)
- From: "Peter Pearse" <Peter.Pearse@xxxxxxx>
- Software FP and Hardware FP
- From: "Sanjiv Malik" <sanjiv@xxxxxxxxxxx>
- Re: arm linux new bee
- From: Aras Vaichas <arasv@xxxxxxxxxxxxxxxxxxxxxxx>
- arm linux new bee
- From: Vamsi <pvamsikris@xxxxxxxxx>
- Re: Strange issue in Linux driver - ARM assembly Guru's help requested
- From: Andre <armcc2000@xxxxxxxxx>
- Re: How to enable preview engine using the System clock
- From: "Harshapvstus" <harsha@xxxxxxx>
- Re: How to enable preview engine using the System clock
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- How to enable preview engine using the System clock
- From: "Harshapvstus" <harsha@xxxxxxx>
- Re: Strange issue in Linux driver - ARM assembly Guru's help requested
- From: Bill Thompson <bill.thompsons@xxxxxxxxx>
- Re: Strange issue in Linux driver - ARM assembly Guru's help requested
- From: Andre <armcc2000@xxxxxxxxx>
- Re: nommu linux for xscale
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- RE: nommu linux for xscale
- From: Rodger.Wilson@xxxxxxxxxx
- Re: nommu linux for xscale
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Strange issue in Linux driver - ARM assembly Guru's help requested
- From: Bill Thompson <bill.thompsons@xxxxxxxxx>
- RE: nommu linux for xscale
- From: Rodger.Wilson@xxxxxxxxxx
- RE: nommu linux for xscale
- From: "Fuller, Vernon" <Vernon.Fuller@xxxxxxxxxxx>
- Re: nommu linux for xscale
- From: Nicolas Pitre <nico@xxxxxxx>
- nommu linux for xscale
- From: Rodger.Wilson@xxxxxxxxxx
- RE: DMAC Programming reference for ARM Versatile board
- From: "Peter Pearse" <Peter.Pearse@xxxxxxx>
- Re: regarding framebuffer
- From: "vivek nand kumar" <nandviv@xxxxxxxxxxxxxx>
- Re: DMAC Programming reference for ARM Versatile board
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
- 3.4.4 Compilation error
- From: "VikramB" <vikramb@xxxxxxxxx>
- uClinux for Samsung 4510B
- From: Dave Benvenuti <davebenvenuti@xxxxxxxxx>
- Re: DMAC Programming reference for ARM Versatile board
- From: "Jason Chang" <jchang@xxxxxxxxxxxxxx>
- Re: trying to trace the leak
- From: "karthik Gopalakrishnan" <karthikgopalakrishnan@xxxxxxxxxxx>
- RE: DMAC Programming reference for ARM Versatile board
- From: "Peter Pearse" <Peter.Pearse@xxxxxxx>
- Re: trying to trace the leak
- From: "karthik Gopalakrishnan" <karthikgopalakrishnan@xxxxxxxxxxx>
- RAM size related disk DMA errors
- From: Chris Ross <lak1646@xxxxxxxxxxxx>
- Re: can anyone provide me a ramdisk
- From: Peter Menzebach <pm-armlist@xxxxxxxxxxx>
- DMAC Programming reference for ARM Versatile board
- From: "Jason Chang" <jchang@xxxxxxxxxxxxxx>
- Re: gcc 3.3 java (and objective c?) fix for 2.6 arm kernels
- From: Lennert Buytenhek <buytenh@xxxxxxxxxxxxxx>
- gcc 3.3 java (and objective c?) fix for 2.6 arm kernels
- From: Lennert Buytenhek <buytenh@xxxxxxxxxxxxxx>
- Re: can anyone provide me a ramdisk
- From: "jack chen" <jackchen81@xxxxxxxxx>
- Re: Ethernet problem
- From: Andrew Victor <andrew@xxxxxxxxxxxxx>
- RE: about the bootargs in u-boot
- From: "Alan Casey" <alan.casey5@xxxxxxxxxxx>
- can anyone provide me a ramdisk
- From: "jack chen" <jackchen81@xxxxxxxxx>
- about the bootargs in u-boot
- From: "jack chen" <jackchen81@xxxxxxxxx>
- processes scheduling
- From: "sameer" <sameer.neugui@xxxxxxxxxxxxxxxx>
- Re: segmentation fault
- From: Erik Mouw <erik@xxxxxxxxxxxx>
- Re: about VFM porting
- From: Erik Mouw <erik@xxxxxxxxxxxx>
- Re: segmentation fault
- From: Dimitry Andric <dimitry@xxxxxxxxxx>
- segmentation fault
- From: Anup M <anupm@xxxxxxxxx>
- Re: 2.6.?? for Atmel AT91RM9200
- From: Eric BENARD / Free <ebenard@xxxxxxx>
- Re: s3c2410 vs s3c2400
- From: Yong-iL Joh <tolkien@xxxxxxxx>
- 2.6.?? for Atmel AT91RM9200
- From: Bennett SH Wai <ben@xxxxxxxxxxxxx>
- s3c2410 vs s3c2400
- From: Виталий Столяров <svitaliy77@xxxxxxx>
- Ethernet problem
- From: Sushant Kumar Mishra <skm_online@xxxxxxxxxxx>
- about VFM porting
- From: jinzhcheng <jinzhcheng@xxxxxxx>
- Real time kernel Patch for linux kernel 2.6.4
- From: "Project Trainees\(Embedded/Harita\)" <projecttrainees@xxxxxxxxxx>
- Re: Linux-arm Digest, Vol 27, Issue 38
- From: jinzhcheng <jinzhcheng@xxxxxxx>
- ./a.out: symbol errno, version GLIBC_2.0 not defined
- From: Pramod P K <pra.engr@xxxxxxxxx>
- strace 4.5.12 - bad syscall patch
- From: Ben Dooks <ben-linux-arm@xxxxxxxxx>
- Re: cross tool for arm
- From: "Sanjiv Malik" <sanjiv@xxxxxxxxxxx>
- Re: cross tool for arm
- From: Sushant Kumar Mishra <skm_online@xxxxxxxxxxx>
- Re: Syntax error: "(" unexpected
- From: Aras Vaichas <arasv@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: cross tool for arm
- From: "Sami Kibria" <skibria@xxxxxxxx>
- Re: cross tool for arm
- From: Michael Opdenacker <michael-lists@xxxxxxxxxxxxxxxxxx>
- Re: cross tool for arm
- From: "Sanjiv Malik" <sanjiv@xxxxxxxxxxx>
- cross tool for arm
- From: Sushant Kumar Mishra <skm_online@xxxxxxxxxxx>
- cross tool for arm
- From: Sushant Kumar Mishra <skm_online@xxxxxxxxxxx>
- Re: oprofile
- From: Geoff Levand <geoffrey.levand@xxxxxxxxxxx>
- Re: at91 usart modem problem.
- From: Peter Menzebach <pm-armlist@xxxxxxxxxxx>
- Problem with USB pendrive mounting on OSK5912 and 2.6.13 kernel
- at91 usart modem problem.
- From: Mathieu Deschamps <mathieu.deschamps@xxxxxxxxxxxxxx>
- Re: trying to trace the leak
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: Syntax error: "(" unexpected
- From: Peter Menzebach <pm-armlist@xxxxxxxxxxx>
- Syntax error: "(" unexpected
- From: Pramod P K <pra.engr@xxxxxxxxx>
- Re: trying to trace the leak
- From: alfred hitch <alfred.hitch@xxxxxxxxx>
- Re: Query: Handling cascaded interrupts involving i2c operations
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: trying to trace the leak
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: oprofile
- From: J Yeh <jasonyeh0908@xxxxxxxxx>
- Query: Handling cascaded interrupts involving i2c operations
- From: Nishanth Menon <x0nishan@xxxxxx>
- 2.6.13-rc2 kernel: low-latency? preemptive?
- From: "Yu Gong" <ygong@xxxxxxxxxxxxxxxxxxxxx>
- oprofile
- From: Rodger.Wilson@xxxxxxxxxx
- Re: trying to trace the leak
- From: alfred hitch <alfred.hitch@xxxxxxxxx>
- RE: asm/arch/param.h: No such file or directory
- From: Rodger.Wilson@xxxxxxxxxx
- Re: asm/arch/param.h: No such file or directory
- From: Jeff Lackey <adslackey@xxxxxxxxxxxxx>
- Re: trying to trace the leak
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- trying to trace the leak
- From: alfred hitch <alfred.hitch@xxxxxxxxx>
- Re: asm/arch/param.h: No such file or directory
- From: Allan Clark <allanc@xxxxxxxxxxxxxxxxxx>
- Re: asm/arch/param.h: No such file or directory
- From: Jeff Lackey <adslackey@xxxxxxxxxxxxx>
- Re: asm/arch/param.h: No such file or directory
- From: Jeff Lackey <adslackey@xxxxxxxxxxxxx>
- asm/arch/param.h: No such file or directory
- From: Rodger.Wilson@xxxxxxxxxx
- system crash, there are different behave with different video bit rate
- From: "Liau.Cloud" <Cloud.Liau@xxxxxxxxxxxx>
- usb support for at91rm9200
- From: Sushant Kumar Mishra <skm_online@xxxxxxxxxxx>
- Re: Problem in starting xserver on ARM VP board
- From: "Sanjiv Malik" <sanjiv@xxxxxxxxxxx>
- Re: 2.6.13 kernel compilation
- From: Allan Clark <allanc@xxxxxxxxxxxxxxxxxx>
- i.MX21 blob and mkparamblock
- From: "kentropy" <kentropy@xxxxxxxxx>
- Re: 2.6.13 kernel compilation
- From: Robin Steven <armrobin@xxxxxxxx>
- Re: Problem in starting xserver on ARM VP board
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
- Problem in starting xserver on ARM VP board
- From: Sai Saravana <sai.sy@xxxxxxxxxxx>
- Re: 2.6.13 kernel compilation
- From: Michael Opdenacker <michael-lists@xxxxxxxxxxxxxxxxxx>
- Re: 2.6.13 kernel compilation
- From: Peter Menzebach <pm-armlist@xxxxxxxxxxx>
- Re: Re:2.6.13 kernel compilation
- From: Robin Steven <armrobin@xxxxxxxx>
- Help!Why I can not use this on Sitsang(PXA255)?
- From: "赵剑" <xc_jackie@xxxxxxxx>
- RE: [Alsa-devel] Problem compiling alsa-driver-1.0.10rc2 for arm.
- From: "Guillaume GOURAT" <guillaume.forum@xxxxxxx>
- Re:2.6.13 kernel compilation
- From: "kentropy" <kentropy@xxxxxxxxx>
- Re: 2.6.13 kernel compilation
- From: Michael Opdenacker <michael-lists@xxxxxxxxxxxxxxxxxx>
- Re: 2.6.13 kernel compilation
- From: Dimitry Andric <dimitry@xxxxxxxxxx>
- Re:2.6.13 kernel compilation
- From: "kentropy" <kentropy@xxxxxxxxx>
- Re: i.MX21ADS boot crash
- From: "kentropy" <kentropy@xxxxxxxxx>
- 2.6.13 kernel compilation
- From: Sushant Kumar Mishra <skm_online@xxxxxxxxxxx>
- Re: glibc2.3.5 problem
- From: Lennert Buytenhek <buytenh@xxxxxxxxxxxxxx>
- glibc2.3.5 problem
- From: Panagiotis Kanellopoulos <pkanellopoulos@xxxxxxxxxxxxxxxx>
- Re: inb, inw, inl, outb, outw, outl
- From: Lennert Buytenhek <buytenh@xxxxxxxxxxxxxx>
- Re: inb, inw, inl, outb, outw, outl
- From: Aras Vaichas <arasv@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: i.MX21ADS boot crash
- From: mike lee <mikelee@xxxxxxxxxxxxx>
- i.MX21ADS boot crash
- From: "kentropy" <kentropy@xxxxxxxxx>
- Re: stdio.h: No such file or directory
- From: Dimitry Andric <dimitry@xxxxxxxxxx>
- stdio.h: No such file or directory
- From: Pramod P K <pra.engr@xxxxxxxxx>
- stdio.h: No such file or directory
- From: Pramod P K <pra.engr@xxxxxxxxx>
- Re: Embest AX4510 (Samsung S3C4510B)
- From: alfred hitch <alfred.hitch@xxxxxxxxx>
- Re: ehci_hcd 00:04.2: fatal error
- From: Erik Mouw <erik@xxxxxxxxxxxx>
- ehci_hcd 00:04.2: fatal error
- From: "Liau.Cloud" <Cloud.Liau@xxxxxxxxxxxx>
- spin_unlock_irqrestore fail
- From: "Liau.Cloud" <Cloud.Liau@xxxxxxxxxxxx>
- Re: inb, inw, inl, outb, outw, outl
- From: Lennert Buytenhek <buytenh@xxxxxxxxxxxxxx>
- Re: inb, inw, inl, outb, outw, outl
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: inb, inw, inl, outb, outw, outl
- From: Aras Vaichas <arasv@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: inb, inw, inl, outb, outw, outl
- From: Aras Vaichas <arasv@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: problem with linuxthreads on arm platform
- From: Peter Menzebach <pm-armlist@xxxxxxxxxxx>
- Re: 2.6.13.2 kernel problem
- From: Panagiotis Kanellopoulos <pkanellopoulos@xxxxxxxxxxxxxxxx>
- Re: inb, inw, inl, outb, outw, outl
- From: Lennert Buytenhek <buytenh@xxxxxxxxxxxxxx>
- Re: 2.6.13.2 kernel problem
- From: "kentropy" <kentropy@xxxxxxxxx>
- Re: Question about registering new machines
- From: Paul Schulz <pschulz01@xxxxxxxxx>
- Re: Question about registering new machines
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: inb, inw, inl, outb, outw, outl
- From: Michael Opdenacker <michael-lists@xxxxxxxxxxxxxxxxxx>
- Question about registering new machines
- From: "Martin Fouts" <Martin.Fouts@xxxxxxxxxxxxxx>
- Re: Embest AX4510 (Samsung S3C4510B)
- From: Andrew Muro <andrewdangermuro@xxxxxxxxx>
- inb, inw, inl, outb, outw, outl
- From: Aras Vaichas <arasv@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: Embest AX4510 (Samsung S3C4510B)
- From: Andrew Muro <andrewdangermuro@xxxxxxxxx>
- Re: Embest AX4510 (Samsung S3C4510B)
- From: alfred hitch <alfred.hitch@xxxxxxxxx>
- Embest AX4510 (Samsung S3C4510B)
- From: Andrew Muro <andrewdangermuro@xxxxxxxxx>
- Re: demand paging ?
- From: alfred hitch <alfred.hitch@xxxxxxxxx>
- Re: understanding "free" memory
- From: alfred hitch <alfred.hitch@xxxxxxxxx>
- Re: Aladdin eToken pro 32K + arcom board + openCT ??
- From: Louis Croisez <louis.croisez@xxxxxxxxx>
- Re: problem with linuxthreads on arm platform
- From: Andre <armcc2000@xxxxxxxxx>
- Re: demand paging ?
- From: Nicolas Pitre <nico@xxxxxxx>
- Re: Aladdin eToken pro 32K + arcom board + openCT ??
- From: Carlo Agrusti <carlo-ag@xxxxxxxxx>
- Re: 2.6.13.2 kernel problem
- From: Panagiotis Kanellopoulos <pkanellopoulos@xxxxxxxxxxxxxxxx>
- Re: 2.6.13.2 kernel problem
- From: Michael Opdenacker <michael-lists@xxxxxxxxxxxxxxxxxx>
- Re: 2.6.13.2 kernel problem
- From: Panagiotis Kanellopoulos <pkanellopoulos@xxxxxxxxxxxxxxxx>
- RE: 2.6.13.2 kernel problem
- From: "Paugam Luc" <luc.paugam@xxxxxxxxxxx>
- Re: 2.6.13.2 kernel problem
- From: Michael Opdenacker <michael-lists@xxxxxxxxxxxxxxxxxx>
- Re: 2.6.13.2 kernel problem