[Prev Page][Next Page]
- Re: [1/4] KS8695 updates: Fix warning in memory.h, (continued)
- machine ID for I-O DATA HDL-GX and HDL-GXR,
Kunihiko IMAI
- [PATCH 0/7] Orion/Kirkwood updates for upcoming merge window,
Nicolas Pitre
- [PATCH 0/6] Omap2 updates for 2.6.29 merge window,
Tony Lindgren
- [PATCH 0/2] Omap1 updates for 2.6.29 merge window,
Tony Lindgren
- Re: [PATCH] USB device support for IMX,
Greg KH
- [BUG] atmel_spi: big transfers data issue,
Marc Pignat
- [Q] request GPIOs for non-GPIO pin function?,
Guennadi Liakhovetski
- Build failure in arch/arm/boot/compressed when linking vmlinux,
Uros Bizjak
- Is there multiple AT91 arch support for a single kernel image?,
Aras Vaichas
- [PATCH, RESENT] Fix configure warnings in defconfigs for netX and Picotux 200,
Uwe Kleine-König
- [PATCH, RESENT] patch warn_if_irqs_are_enabled_in_set_next_event,
Uwe Kleine-König
- [PATCH, RESENT] remove a superfluous kconfig type definition,
Uwe Kleine-König
- [PATCH] small doc fix: ftrace_dyn_arch_init is called by ftrace_init,
Uwe Kleine-König
- uClibc pthread_mutex_lock seems broken on 2.6.28-rc6 for iop13xx,
David Fiddes
- arm_clks patch status,
hartleys
- Support for i.MX31 ?,
Midhun A
- kmalloc is failing and kernel is hanging,
abc xyz
- mmu, page size and fiq doubts,
Victor Librado
- [RFC, PATCH v2 0/4] ARM: PL08X: Add DMA Controller support for PL08x series.,
protected
- [RFC, PATCH v2 3/3] ARM: PL08X: Implement the PL081 DMAC on the RealView PB11MPCore board.,
protected
- [RFC, PATCH v2 2/3] ARM: PL08X: Implement AMBA DMA API for AACI playback.,
protected
- I hope get your help with lcd driver with spi,
peter meng
- [RFC, PATCH v2 1/3] ARM: PL08X: Add PL08x AMBA DMA Controller driver.,
protected
- Re: [PATCH][resend] iMX/MXC support for I2C,
Jean Delvare
- Kernel oops in am200_init(),
Eric Miao
- S3C64X LCD and misc fixes,
Ben Dooks
- [GIT PULL REQUEST] pxa patches in 'devel',
Eric Miao
- [PATCH V3]ARM:Add Nuvoton W90P910 Platform support,
Vincent Wan
- [patch 6/7] pcm037: add 1wire support,
akpm
- [patch 5/7] MX2 pcm038: add 1-wire master support,
akpm
- [patch 4/7] MX31: add w1 platform_device and resources,
akpm
- [patch 7/7] arch/arm: eliminate NULL test and memset after alloc_bootmem,
akpm
- [patch 2/7] arm: fix kernel-doc syntax,
akpm
- [patch 1/7] arm: use the new byteorder headers,
akpm
- [patch 3/7] MX2: Add W1 device/resources,
akpm
- [PATCH] fix a pile of OMAP issues,
Russell King - ARM Linux
- [PATCH] Fix mem_alignment doc,
Matthieu CASTET
- [PATCH] basic support for Colibri PXA300 module,
Daniel Mack
- [PATCH] include mach/i2c.h in pxa3xx.c,
Daniel Mack
- [PATCH] add missing cmdset field in PXA3xx NAND code,
Daniel Mack
- Re: linux-gemini (gitorious.org),
Paulius Zaleckas
- [ARM] pxa: explicit #include <mach/dma.h> in various drivers,
Eric Miao
- [PATCH] locomo: export locomo_frontlight_set(),
Eric Miao
- Ignoring RAM - vmalloc region overlap,
Oliver Ford
- [RFC 2.6.27 1/1] gpiolib: add support for batch set of pins,
Jaya Kumar
- [PATCH 2/2] pxa: add base PXA935 support due to CPUID change,
Eric Miao
- [PATCH 1/2] pxa: introduced cpu_is_pxa935() and cpu_is_pxa9xx(),
Eric Miao
- [PATCH 3/3] pxa: move I2C pin configurations out into board specific files,
Eric Miao
- [PATCH 2/3] pxa: register Power I2C device only when necessary,
Eric Miao
- [PATCH 1/3] pxa: move power I2C device definitions into devices.c,
Eric Miao
- [PATCH 0/3] pxa: i2c devices code cleanup,
Eric Miao
- [PATCH 8/8] pxa: further cleanup of pxa-regs.h,
Eric Miao
- [PATCH 7/8] pxa: move GPIOx_BASE and GPIO register offsets to gpio.c,
Eric Miao
- [PATCH 6/8] pxa: move AC97 register definitions into dedicated regs-ac97.h,
Eric Miao
- [PATCH 5/8] pxa: move UART register definitions into dedicated regs-uart.h,
Eric Miao
- [PATCH 4/8] pxa: move pxa2xx specific PWRMODE definitions into pxa2xx-regs.h,
Eric Miao
- [PATCH 3/8] pxa: remove the now unused IMPMCR/IMPMSR register definitions,
Eric Miao
- [PATCH 2/8] pxa: remove unused PWM register definitions, use generic PWM API,
Eric Miao
- [PATCH 1/8] pxa: move FICP register definitions into pxaficp_ir.c,
Eric Miao
- [PATCH 0/8] further separation of pxa-regs.h,
Eric Miao
- The changes so far... (and what you need to check or update in your patches),
Russell King - ARM Linux
- [PATCH 00/11] Omap gpio updates for review for 2.6.29 merge window,
Tony Lindgren
- [PATCH 02/11] ARM: OMAP: Extend gpio label column width in omap_gpio debugfs file,
Tony Lindgren
- [PATCH 03/11] ARM: OMAP: gpios implement new to_irq(),
Tony Lindgren
- [PATCH 05/11] ARM: OMAP: switch to gpio_direction_input,
Tony Lindgren
- [PATCH 10/11] ARM: OMAP: Switch to gpio_request/free calls,
Tony Lindgren
- [PATCH 11/11] ARM: OMAP: Switch ohci-omap to gpio_request/free calls,
Tony Lindgren
- [PATCH 01/11] ARM: OMAP: Enable GPIO debounce clock only when debounce is enabled v3,
Tony Lindgren
- [PATCH 09/11] ARM: OMAP: minor gpio bugfixes,
Tony Lindgren
- [PATCH 08/11] ARM: OMAP: make legacy gpio request/free calls superfluous,
Tony Lindgren
- [PATCH 07/11] ARM: OMAP: use gpio_to_irq,
Tony Lindgren
- [PATCH 06/11] ARM: OMAP: switch to gpio_direction_output,
Tony Lindgren
- [PATCH 04/11] ARM: OMAP: switch to standard gpio get/set calls,
Tony Lindgren
- git pull request for the current -rc kernel,
Nicolas Pitre
- [PATCH 09/10] omap mailbox: convert sequence bit checking to module paramter,
Hiroshi DOYU
- [PATCH 10/10] omap mailbox: remove unnecessary header file inclusion,
Hiroshi DOYU
- [PATCH 08/10] omap mailbox: move mailbox.h into mailbox.c,
Hiroshi DOYU
- [PATCH 05/10] omap mailbox: fix empty struct device for omap1,
Hiroshi DOYU
- [PATCH 00/10] omap mailbox: add omap3 support and some fixes,
Hiroshi DOYU
- [PATCH 07/10] omap mailbox: add save_/restore_ctx() for PM,
Hiroshi DOYU
- [PATCH 06/10] omap mailbox: fix empty struct device for omap2,
Hiroshi DOYU
- [PATCH 04/10] omap mailbox: fix empty struct device for omap_mbox,
Hiroshi DOYU
- [PATCH 03/10] omap mailbox: print hardware revision at startup,
Hiroshi DOYU
- [PATCH 02/10] omap mailbox: add initial omap3 support,
Hiroshi DOYU
- [PATCH 01/10] omap mailbox: cleanup omap2 register definition with macro,
Hiroshi DOYU
- AT572D940HF patch duplication,
Antonio R. Costa
- MioA701's dependency on LEDS_GPIO?,
Eric Miao
- [PATCH 2/2] V4L/DVB: pxa-camera: use memory mapped IO access for camera (QCI) registers,
Eric Miao
- [PATCH 1/2] [ARM] pxa: move camera (QCI) registers definition out of pxa-regs.h,
Eric Miao
- Enable L2 cache on XScale3 crashes kernel,
Jürgen Schindele
- [PATCH] mmc: at91_mci: reorder timer setup and mmc_add_host() call,
Nicolas Ferre
- [PATCH] pxa/em-x270: updates for 2.6.29,
Mike Rapoport
- [PATCH 2/2] pxa/littleton: update tdo24m LCD panel support,
Mike Rapoport
- [PATCH 1/2] lcd: add support for Toppoly TDO35S series to tdo24m driver,
Mike Rapoport
- [PATCH] [ARM] pxa: move pxa27x camera (QCI) registers definitions into the driver,
Eric Miao
- ARM922t: Linux Kernel 2.6.26.3, unknown relocation: 40,
Vivek Kumar Gupta
- ARM926T -> ARM926E,
Matthieu CASTET
- [PATCH] [S3C64XX] Fix external interrupt handling,
Kyungmin Park
- need atmel tclib help,
Aras Vaichas
- git-pull request for omap-fixes for 2.6.28,
Tony Lindgren
- [PATCH] tosa: fix building w/o TC6393XB driver,
Dmitry Baryshkov
- [RFC] [PATCH] Add basic gumstix verdex support,
Andre Puschmann
- [GIT PULL REQUEST] additional small pxa fixes,
Eric Miao
- MXC Patches for the next merge window,
Sascha Hauer
- [PATCH] MX27: Fix EMMA Base addresses,
Sascha Hauer
- [PATCH] [ARM] MX2: Add IRQ_GPIOE definition,
Sascha Hauer
- [PATCH] [ARM] MX27ads: remove unused define,
Sascha Hauer
- [PATCH] MX27: Add USB pin function defines,
Sascha Hauer
- [PATCH] [ARM] MX27: add i.MX27 SDHC1 and SDHC2 GPIO declarations,
Sascha Hauer
- [PATCH] [ARM] MX1/MX2: simplify mxc_gpio_setup_multiple_pins,
Sascha Hauer
- [PATCH] [ARM] MX3 iomux: add more pin definitions,
Sascha Hauer
- [PATCH] i.MX31: fix mxc_iomux_set_pad(),
Sascha Hauer
- [PATCH] pcm038: add driver for static ram,
Sascha Hauer
- [PATCH] [ARM] pcm037: add support for the on-board LAN9217 network controller,
Sascha Hauer
- [PATCH] [ARM] pcm037: Add support for SRAM device,
Sascha Hauer
- [PATCH] Add basic support for MX31PDK board.,
Sascha Hauer
- [PATCH] Add default configuration for MX31PDK board.,
Sascha Hauer
- [PATCH] [ARM] MX27: Add NAND resources,
Sascha Hauer
- [PATCH] [ARM] pcm038: Add NAND support,
Sascha Hauer
- [PATCH] [ARM] MX3: add NAND support,
Sascha Hauer
- [PATCH] [ARM] pcm037: add NAND support,
Sascha Hauer
- [PATCH] imxmmc: Checkpatch cleanup,
Sascha Hauer
- [PATCH] imxmmc: Remove unused variables,
Sascha Hauer
- [PATCH] imxmmc: use readl/writel,
Sascha Hauer
- [PATCH] MX31: definitions for UART2 pins,
Sascha Hauer
- [PATCH] MX31: UART5 pins definition,
Sascha Hauer
- [PATCH] [ARM] MX31: basic support for mx31moboard platform,
Sascha Hauer
- [PATCH] [ARM] MX31: defconfig for mx31moboard platform,
Sascha Hauer
- [PATCH] patch-iomux-mx1-mx2-cleanup,
Sascha Hauer
- [PATCH] patch-mxc-add-ARCH_MX1,
Sascha Hauer
- [PATCH] patch-mx1-add-devices,
Sascha Hauer
- [PATCH] patch-mx1-mtd-xip,
Sascha Hauer
- [PATCH] patch-mx1-UART-support,
Sascha Hauer
- [PATCH] patch-mxc-fiq,
Sascha Hauer
- [PATCH] [MMC]: Add a MX2/MX3 specific SDHC driver,
Sascha Hauer
- [PATCH] [ARM] MX31: Add sdhc resources/platform devices,
Sascha Hauer
- [PATCH] [ARM] pcm037: Add sdhc support,
Sascha Hauer
- [PATCH] [ARM] MX2: Add SDHC platform_devices and resources,
Sascha Hauer
- [PATCH] [ARM] pcm970 baseboard: Add SDHC support,
Sascha Hauer
- [PATCH] Add 1-wire master driver for i.MX27 / i.MX31,
Sascha Hauer
- [PATCH] [ARM] MX2: Add W1 device/resources,
Sascha Hauer
- [PATCH] [ARM] MX31: add w1 platform_device and resources,
Sascha Hauer
- [PATCH] [ARM] MX2 pcm038: add 1-wire master support,
Sascha Hauer
- [PATCH] [ARM] pcm037: add 1wire support,
Sascha Hauer
- [PATCH] Unused variable 'reg' removed.,
Sascha Hauer
- Re: [PATCH] [MMC]: Add a MX2/MX3 specific SDHC driver,
Fabio Estevam
- Re: [PATCH] [MMC]: Add a MX2/MX3 specific SDHC driver,
Julien Boibessot
- Re: [PATCH] [MMC]: Add a MX2/MX3 specific SDHC driver,
Sascha Hauer
- Re: [PATCH] [MMC]: Add a MX2/MX3 specific SDHC driver,
Russell King - ARM Linux
- Re: [PATCH] [MMC]: Add a MX2/MX3 specific SDHC driver,
Sascha Hauer
- Re: [PATCH] [MMC]: Add a MX2/MX3 specific SDHC driver,
Guennadi Liakhovetski
- Re: [PATCH] [MMC]: Add a MX2/MX3 specific SDHC driver,
Sascha Hauer
- Re: [PATCH] [MMC]: Add a MX2/MX3 specific SDHC driver,
Guennadi Liakhovetski
- Re: [PATCH] [ARM] MX27: add i.MX27 SDHC1 and SDHC2 GPIO declarations,
Julien Boibessot
- Re: MXC Patches for the next merge window,
Liam Girdwood
- Re: MXC Patches for the next merge window,
Darius
- Re: MXC Patches for the next merge window,
Russell King - ARM Linux
- [PATCH 3/3] [ARM] pxa: add support for additional GPIOs on PXA26x,
Eric Miao
- [PATCH 2/3] [ARM] pxa: use 'pxa_last_gpio' instead of 'gpio_nr' in mfp-pxa2xx.c,
Eric Miao
- [PATCH 1/3] Revert "[ARM] pxa: introduce cpu_is_pxa26x()",
Eric Miao
- [PATCH] arm: ARMv7 cache info printk,
lil
- [RFC 2.6.27] gumstix: move am200 specific gpio pins into am200epd.,
Jaya Kumar
- [PATCH 1/5] [RFC PATCH] Support for AT572D940HF-EK [RFC PATCH],
Antonio R. Costa
- [PATCH 5/5] omap iommu: entries for Kconfig and Makefile,
Hiroshi DOYU
- [PATCH 4/5] omap iommu: sysfs for userland interface,
Hiroshi DOYU
- [PATCH] pcm990: a negative number has to be used for an invalid GPIO in camera data,
Guennadi Liakhovetski
- [PATCH 3/5] omap iommu: simple virtual address space management,
Hiroshi DOYU
- [PATCH 2/5] omap iommu: omap2 architecture specific functions,
Hiroshi DOYU
- [PATCH 1/5] omap iommu: tlb and pagetable primitives,
Hiroshi DOYU
- IXP4xx and Kernel Scheduler,
Van Roekel, Jeff
- [PATCH 0/5] add omap iommu driver support,
Hiroshi DOYU
- fsl_mx27ads and FEC,
Alexander Smirnov
- [PATCH] [S3C64XX] Mask the pll values correctly,
Kyungmin Park
- [PATCH] [S3C64XX] Show uncompress messages,
Kyungmin Park
- [PATCH] [ARM] pxa: convert poodle/corgi/spitz to use SPI GPIO chipselect,
Eric Miao
- [PATCH] spi: pxa2xx_spi introduces chipselect GPIO to simplify the common cases,
Eric Miao
- [PATCH] [ARM] pxa: use <linux/gpio.h> instead of unnecessary <mach/gpio.h>,
Eric Miao
- state of at91rm9200 support for audio output,
Aras Vaichas
- Re: [patch 2.6.28-rc6] usb gadget: pxa25x_udc vbus sense initialization,
Jaya Kumar
- Multiplexed SPI/MMC GPIO lines (AT91SAM9260),
Kevin Greer
- [PATCH] tosa: add physmap mapping for ROM,
Dmitry Baryshkov
- [PATCH] [MTD] sharpsl_nand: switch to driver model usage.,
Dmitry Baryshkov
- RE : AT91SAM9263: Problem with the RTC driver (rtc-at91sam9.c) in2.6.26,
Jean-Christophe Lallemand
- Re: [PATCH 0/5] omap iommu driver,
Tony Lindgren
- mx27ads ethernet issue,
Alexander Smirnov
- [PATCH] collie: start scoop converton to new api,
Dmitry Baryshkov
- resume from STR on at91rm9200 takes 13 seconds, why?,
Aras Vaichas
- Please fix lcd_sx1.c,
Russell King - ARM Linux
- [PATCH] Add proper locking to ixp4xx gpio handler,
Zoltan Devai
- [PATCH] PalmTC initial support,
Marek Vasut
- [patch 0/8] ARM: Balloon3 support,
Wookey
- atmel_spi and dataflash problems on at91rm9200,
Andre Puschmann