Hi, This series adds basic support for the PRCM module on sun9i, which has clock and reset controls for the CPU-S or RTC block. The series is marked RFC, because we do not have actual documentation for it. I am assuming the clock tree and register format is the same as the A31 and A23. Obviously we will need to do some testing to verify, which we would need actual peripherals to do. I'm posting this so Maxime can test his pinctrl drivers, and then we can work out how to verify the clocks. Cheers ChenYu Chen-Yu Tsai (3): clk: sunxi: sun6i-apb0: Add support for sun9i A80 apbs gates mfd: sun6i-prcm: Add support for PRCM found on Allwinner A80 SoC ARM: dts: sun9i: Add A80 PRCM clocks and reset control nodes Documentation/devicetree/bindings/clock/sunxi.txt | 1 + arch/arm/boot/dts/sun9i-a80.dtsi | 47 +++++++++++++++++++- drivers/clk/sunxi/clk-sun6i-apb0-gates.c | 6 +++ drivers/mfd/sun6i-prcm.c | 52 +++++++++++++++++++++++ 4 files changed, 105 insertions(+), 1 deletion(-) -- 2.1.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/linux-arm-kernel