[PATCH v2 0/2] ARM: berlin: add SDHCI support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This series adds the Berlin BG2Q SDHCI nodes to support the 3 controllers
available. The Berlin BG2Q SDHCI controllers are compatible with the pxav3
driver. This patches also enable the SD Card reader and the eMMC of the
BG2Q DMP.

This series applies on top of Alexandre's patches for the Berlin's pll:
https://patchwork.kernel.org/patch/3890341/
https://patchwork.kernel.org/patch/3876271/

Changes since v1:
	The v2 introduced a custom Berlin SDHCI driver. It turns out the
	available pxav3 driver was compatible with the BG2Q SDHCI controllers.
	- removed the unneeded custom driver
	- switched to the pxav3 driver
	- removed the board specific properties from the SoC device tree

Antoine Ténart (2):
  ARM: dts: berlin: add the SDHCI nodes for the BG2Q
  ARM: dts: berlin: enable SD card reader and eMMC for the BG2Q DMP

 arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 11 ++++++++++
 arch/arm/boot/dts/berlin2q.dtsi            | 32 ++++++++++++++++++++++++++++++
 2 files changed, 43 insertions(+)

-- 
1.8.3.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel





[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [CentOS ARM]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]     [Photos]