[PATCH v11 12/15] usb: phy-mxs: Add sync time after controller clear phcd

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



After clear portsc.phcd, PHY needs 200us stable time for switch
32K clock to AHB clock.

Signed-off-by: Peter Chen <peter.chen@xxxxxxxxxxxxx>
---
 drivers/usb/phy/phy-mxs-usb.c |   11 +++++++++++
 1 files changed, 11 insertions(+), 0 deletions(-)

diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index 31ef59f..c42bdf0 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -151,6 +151,15 @@ static inline bool is_imx6sl_phy(struct mxs_phy *mxs_phy)
 	return mxs_phy->data == &imx6sl_phy_data;
 }
 
+/*
+ * PHY needs some 32K cycles to switch from 32K clock to
+ * bus (such as AHB/AXI, etc) clock.
+ */
+static void mxs_phy_clock_switch_delay(void)
+{
+	usleep_range(300, 400);
+}
+
 static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
 {
 	int ret;
@@ -261,6 +270,7 @@ static int mxs_phy_init(struct usb_phy *phy)
 	int ret;
 	struct mxs_phy *mxs_phy = to_mxs_phy(phy);
 
+	mxs_phy_clock_switch_delay();
 	ret = clk_prepare_enable(mxs_phy->clk);
 	if (ret)
 		return ret;
@@ -289,6 +299,7 @@ static int mxs_phy_suspend(struct usb_phy *x, int suspend)
 		       x->io_priv + HW_USBPHY_CTRL_SET);
 		clk_disable_unprepare(mxs_phy->clk);
 	} else {
+		mxs_phy_clock_switch_delay();
 		ret = clk_prepare_enable(mxs_phy->clk);
 		if (ret)
 			return ret;
-- 
1.7.8



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [CentOS ARM]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]     [Photos]