Re: [PATCH v3 0/7] tty/serial: Add helpers to use GPIOs to control modem lines and implement atmel_serial.c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello.

Понедельник, 17 февраля 2014, 17:57 +01:00 от Richard Genoud <richard.genoud@xxxxxxxxx>:
> The USART controller on sam9x5 chips (and also all AT91/SAMA5 chips
> but at91rm9200) are not capable of handling DTR/DSR/DCD/RI signal.
> Moreover, even if the controller can handle CTS/RTS, the dedicated
> CTS/RTS pins are already muxed for other peripherals (LCDC/EMAC/MMC).
> 
> So this patchset adds the possibility to control those lines via GPIO,
> as it is done for RTS in the patch "switch atmel serial to use gpiolib"
> 
> As it was suggested by Alexander Shiyan, I made that available for
> every board.
> 
> Patch 1 implements the generic helpers to control modem lines via GPIO
> Patches 2 and 3 are just a little tidy up of atmel_serial.c.
> Patch 4 implements modem control lines in atmel_serial atmel_serial.
> Patches 5 and 6 implement the get_direction() gpio call for at91, as
> it is needed by gpiod_get_direction().
> Patch 7 implement the interrupts of CTS/DSR/DCD/RI.

I still recommend split this series. The first patch must be a separate,
2 and 3 - independent to this series, 5 and 6 - to the appropriate mailing lists,
and finally as soon as all of the previous will be applied - you can send 7.

Thanks.
---
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel





[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [CentOS ARM]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]     [Photos]