Re: [PATCH 3/6] net: cpsw: Add control-module macid driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Thu, Feb 13, 2014 at 08:44:31PM +0100, Uwe Kleine-König wrote:
> On Wed, Dec 18, 2013 at 05:47:19PM +0100, Markus Pargmann wrote:
> > This driver extracts the hardware macid from the control module of
> > am335x processors. It exports a function cpsw_ctrl_macid_read for cpsw
> > to get the macid from within the processor.
> > 
> > This driver is not used, unless it is defined in DT and referenced by a
> > cpsw slave with a phandle.
> > 
> > Signed-off-by: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
> > ---
> >  .../devicetree/bindings/net/cpsw-ctrl-macid.txt    |  31 +++++
> >  drivers/net/ethernet/ti/Kconfig                    |   8 ++
> >  drivers/net/ethernet/ti/Makefile                   |   1 +
> >  drivers/net/ethernet/ti/cpsw-ctrl-macid.c          | 138 +++++++++++++++++++++
> >  4 files changed, 178 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/net/cpsw-ctrl-macid.txt
> >  create mode 100644 drivers/net/ethernet/ti/cpsw-ctrl-macid.c
> > 
> > diff --git a/Documentation/devicetree/bindings/net/cpsw-ctrl-macid.txt b/Documentation/devicetree/bindings/net/cpsw-ctrl-macid.txt
> > new file mode 100644
> > index 0000000..abff2af
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/net/cpsw-ctrl-macid.txt
> > @@ -0,0 +1,31 @@
> > +TI CPSW ctrl macid Devicetree bindings
> > +--------------------------------------
> > +
> > +Required properties:
> > + - compatible		: Should be "ti,am3352-cpsw-ctrl-macid"
> > + - reg			: physical base address and size of the cpsw
> > +			  registers map
> > + - reg-names		: names of the register map given in "reg" node
> > + - #ti,cpsw-ctrl-macid	: Should be <1>
> #ti,mac-address-ctrl-cells?

Sounds better, will fix.

> 
> > +
> > +When used from cpsw, "ti,mac-address-ctrl" should be a phandle to this device
> > +node with one argument, 0 or 1 to select the macid 0 or 1.
> > +
> > +Examples:
> > +
> > +	cpsw_ctrl_macid: cpsw-ctrl-macid@44e10630 {
> > +		compatible = "ti,am3352-cpsw-ctrl-macid";
> > +		#ti,mac-address-ctrl-cells = <1>;
> > +		reg = <0x44e10630 0x16>;
> s/0x16/0x10/

Thanks, that's a bug, obviously we only have 4, not 5.5 registers.

> 
> > +		reg-names = "ctrl-macid";
> > +	};
> > +
> > +Used in cpsw slave nodes like this:
> > +
> > +	cpsw_emac0: slave@4a100200 {
> > +		ti,mac-address-ctrl = <&cpsw_ctrl_macid 0>;
> > +	};
> > +
> > +	cpsw_emac1: slave@4a100300 {
> > +		ti,mac-address-ctrl = <&cpsw_ctrl_macid 1>;
> > +	};
> > diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
> > index 53150c2..24819ef 100644
> > --- a/drivers/net/ethernet/ti/Kconfig
> > +++ b/drivers/net/ethernet/ti/Kconfig
> > @@ -56,12 +56,20 @@ config TI_CPSW_PHY_SEL
> >  	  This driver supports configuring of the phy mode connected to
> >  	  the CPSW.
> >  
> > +config TI_CPSW_CTRL_MACID
> > +	boolean "TI CPSW internal MACID support"
> > +	depends on TI_CPSW
> > +	---help---
> > +	  This driver supports reading the hardcoded MACID from am33xx
> > +	  processors control module.
> > +
> Would it be nicer to put this after the TI_CPSW definition. (Think
> $(make config).)

I inserted TI_CPSW_CTRL_MACID here because the other TI_CPSW specific
subdriver (TI_CPSW_PHY_SEL) was above TI_CPSW. But I could change this.

> 
> >  config TI_CPSW
> >  	tristate "TI CPSW Switch Support"
> >  	depends on ARM && (ARCH_DAVINCI || SOC_AM33XX)
> >  	select TI_DAVINCI_CPDMA
> >  	select TI_DAVINCI_MDIO
> >  	select TI_CPSW_PHY_SEL
> > +	select TI_CPSW_CTRL_MACID
> If TI_CPSW selects TI_CPSW_CTRL_MACID the latter doesn't need to depend
> on the former. So this optin is user visible but never
> user-(de)selectable. I'd say drop the Kconfig symbol and just add
> cpsw-ctrl-macid.o to ti_cpsw-y in the Makefile (or really make it
> optional).

As this is closely related to the cpsw driver, I think it's better to
make it non-optional and include it in the Makefile.

Thanks,

Markus

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel





[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [CentOS ARM]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]     [Photos]