Re: [PATCH 1/3] arm64: dts: add initial dts for Samsung GH7 SoC and SSDK-GH7 board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Besides what Mark Rutland already commented on:

On Mon, Feb 10, 2014 at 10:29 PM, Kukjin Kim <kgene.kim@xxxxxxxxxxx> wrote:
> +/ {
> +       model = "SAMSUNG GH7";
> +       compatible = "samsung,gh7";

Model and compatible in the dtsi should probably always be overridden
by a dts that includes it, so there's little use in having it here.

> +       interrupt-parent = <&gic>;
> +       #address-cells = <2>;
> +       #size-cells = <2>;
> +
> +       cpus {
> +               #address-cells = <2>;
> +               #size-cells = <0>;
> +
> +               cpu@000 {
> +                       device_type = "cpu";
> +                       compatible = "arm,armv8";
> +                       reg = <0x0 0x000>;

No need to zero-pad cpu numbers in unit address or reg.

> +                       enable-method = "spin-table";
> +                       cpu-release-addr = <0x0 0x8000fff8>;
> +               };
> +               cpu@001 {
> +                       device_type = "cpu";
> +                       compatible = "arm,armv8";
> +                       reg = <0x0 0x001>;
> +                       enable-method = "spin-table";
> +                       cpu-release-addr = <0x0 0x8000fff8>;
> +               };
> +               cpu@002 {
> +                       device_type = "cpu";
> +                       compatible = "arm,armv8";
> +                       reg = <0x0 0x002>;
> +                       enable-method = "spin-table";
> +                       cpu-release-addr = <0x0 0x8000fff8>;
> +               };
> +               cpu@003 {
> +                       device_type = "cpu";
> +                       compatible = "arm,armv8";
> +                       reg = <0x0 0x003>;
> +                       enable-method = "spin-table";
> +                       cpu-release-addr = <0x0 0x8000fff8>;
> +               };
> +       };
> +
> +       gic: interrupt-controller@1C000000 {
> +               compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";

This looks incorrect -- you should at the very least have a more
specific one than a15-gic? Marc?

> +               #interrupt-cells = <3>;
> +               #address-cells = <0>;
> +               interrupt-controller;
> +               reg = <0x0 0x1C001000 0 0x1000>,        /* GIC Dist */
> +                     <0x0 0x1C002000 0 0x1000>,        /* GIC CPU */
> +                     <0x0 0x1C004000 0 0x2000>,        /* GIC VCPU Control */
> +                     <0x0 0x1C006000 0 0x2000>;        /* GIC VCPU */
> +               interrupts = <1 9 0xf04>;       /* GIC Maintenence IRQ */
> +       };
> +
> +       timer {
> +               compatible = "arm,armv8-timer";
> +               interrupts = <1 13 0xff01>,     /* Secure Phys IRQ */
> +                            <1 14 0xff01>,     /* Non-secure Phys IRQ */
> +                            <1 11 0xff01>,     /* Virt IRQ */
> +                            <1 10 0xff01>;     /* Hyp IRQ */
> +               clock-frequency = <100000000>;
> +       };
> +
> +       pmu {
> +               compatible = "arm,armv8-pmuv3";
> +               interrupts = <0 294 8>,
> +                            <0 295 8>,
> +                            <0 296 8>,
> +                            <0 297 8>,
> +                            <0 298 8>,
> +                            <0 299 8>,
> +                            <0 300 8>,
> +                            <0 301 8>;
> +       };
> +
> +       amba {
> +               compatible = "arm,amba-bus";
> +               #address-cells = <1>;
> +               #size-cells = <1>;
> +               ranges;
> +
> +               serial@12c00000 {
> +                       compatible = "arm,pl011", "arm,primecell";
> +                       reg = <0x12c00000 0x10000>;
> +                       interrupts = <418>;
> +               };
> +
> +               serial@12c20000 {
> +                       compatible = "arm,pl011", "arm,primecell";
> +                       reg = <0x12c20000 0x10000>;
> +                       interrupts = <420>;
> +               };
> +       };
> +};
> diff --git a/arch/arm64/boot/dts/samsung-ssdk-gh7.dts b/arch/arm64/boot/dts/samsung-ssdk-gh7.dts
> new file mode 100644
> index 0000000..47afbc4
> --- /dev/null
> +++ b/arch/arm64/boot/dts/samsung-ssdk-gh7.dts
> @@ -0,0 +1,26 @@
> +/*
> + * SAMSUNG SSDK-GH7 board device tree source
> + *
> + * Copyright (c) 2014 Samsung Electronics Co., Ltd.
> + *             http://www.samsung.com
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +/dts-v1/;
> +#include "samsung-gh7.dtsi"
> +
> +/ {
> +       model = "SAMSUNG SSDK-GH7 board based on GH7 SoC";
> +       compatible = "samsung,ssdk-gh7", "samsung,gh7";
> +
> +       chosen {
> +       };
> +
> +       memory@80000000 {
> +               device_type = "memory";
> +               reg = <0x00000000 0x80000000 0 0x80000000>;
> +       };
> +};
> --
> 1.7.10.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [CentOS ARM]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]     [Photos]