Re: [PATCH v3 2/8] ARM: dts: sun7i: Add GMAC clock node to sun7i DTSI

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Feb 03, 2014 at 11:32:20AM +0800, Chen-Yu Tsai wrote:
> The GMAC uses 1 of 2 sources for its transmit clock, depending on the
> PHY interface mode. Add both sources as dummy clocks, and as parents
> to the GMAC clock node.
> 
> Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
> ---
>  arch/arm/boot/dts/sun7i-a20.dtsi | 28 ++++++++++++++++++++++++++++
>  1 file changed, 28 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
> index 1595e9a..fc7f470 100644
> --- a/arch/arm/boot/dts/sun7i-a20.dtsi
> +++ b/arch/arm/boot/dts/sun7i-a20.dtsi
> @@ -314,6 +314,34 @@
>  		};
>  
>  		/*
> +		 * The following two are dummy clocks, placeholders used
> +		 * on gmac_tx clock. The actual frequency and availability
> +		 * depends on the external PHY, operation mode and link
> +		 * speed.
> +		 */

If it depends on the external PHY, I guess that means it also depends
on the board, right? Or is the GMAC supposed to always have that clock
running at 25MHz, no matter what PHY is connected to it?

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Attachment: signature.asc
Description: Digital signature

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [CentOS ARM]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]     [Photos]