Re: [PATCH v2 2/5] clk: sunxi: Add USB clock register defintions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Hans,

Mostly looking good, but I have a few comments below.

On Wed, Jan 22, 2014 at 10:36:24PM +0100, Hans de Goede wrote:
> From: Roman Byshko <rbyshko@xxxxxxxxx>
> 
> Add register definitions for the usb-clk register found on sun4i, sun5i and
> sun7i SoCs.
> 
> Signed-off-by: Roman Byshko <rbyshko@xxxxxxxxx>
> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/clock/sunxi.txt |  5 +++++
>  drivers/clk/sunxi/clk-sunxi.c                     | 12 ++++++++++++
>  2 files changed, 17 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
> index 79c7197..8bccb6a 100644
> --- a/Documentation/devicetree/bindings/clock/sunxi.txt
> +++ b/Documentation/devicetree/bindings/clock/sunxi.txt
> @@ -37,6 +37,8 @@ Required properties:
>  	"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
>  	"allwinner,sun4i-mod0-clk" - for the module 0 family of clocks
>  	"allwinner,sun7i-a20-out-clk" - for the external output clocks
> +	"allwinner,sun4i-usb-gates-clk" - for usb gates + resets on A10 / A20
> +	"allwinner,sun5i-a13-usb-gates-clk" - for usb gates + resets on A13

Maybe we can just remove the gates from there? Even though they are
gates, they are also (a bit) more than that.

>  Required properties for all clocks:
>  - reg : shall be the control register address for the clock.
> @@ -49,6 +51,9 @@ Required properties for all clocks:
>  Additionally, "allwinner,*-gates-clk" clocks require:
>  - clock-output-names : the corresponding gate names that the clock controls
>  
> +And "allwinner,*-usb-gates-clk" clocks also require:
> +- reset-cells : shall be set to 1
> +

You should also document what value we should put in the cells, and
where to refer to to find the right one.

>  Clock consumers should specify the desired clocks they use with a
>  "clocks" phandle cell. Consumers that are using a gated clock should
>  provide an additional ID in their clock property. This ID is the
> diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
> index f1a147c..18cbc3c 100644
> --- a/drivers/clk/sunxi/clk-sunxi.c
> +++ b/drivers/clk/sunxi/clk-sunxi.c
> @@ -813,6 +813,16 @@ static const struct gates_data sun4i_ahb_gates_data __initconst = {
>  	.mask = {0x7F77FFF, 0x14FB3F},
>  };
>  
> +static const struct gates_data sun4i_usb_gates_data __initconst = {
> +	.mask = {0x1C0},
> +	.reset_mask = 0x07,
> +};
> +
> +static const struct gates_data sun5i_a13_usb_gates_data __initconst = {
> +	.mask = {0x140},
> +	.reset_mask = 0x03,
> +};
> +

I guess that means that we will have the OHCI0 gate declared with
<&...-gates-clk 6>, while it's actually the first gate for this clock?

Maybe introducing an offset field in the gates_data would be a good
idea, so that we always start from indexing the gates from 0 in the DT?

>  static const struct gates_data sun5i_a10s_ahb_gates_data __initconst = {
>  	.mask = {0x147667e7, 0x185915},
>  };
> @@ -1159,6 +1169,8 @@ static const struct of_device_id clk_gates_match[] __initconst = {
>  	{.compatible = "allwinner,sun6i-a31-apb1-gates-clk", .data = &sun6i_a31_apb1_gates_data,},
>  	{.compatible = "allwinner,sun7i-a20-apb1-gates-clk", .data = &sun7i_a20_apb1_gates_data,},
>  	{.compatible = "allwinner,sun6i-a31-apb2-gates-clk", .data = &sun6i_a31_apb2_gates_data,},
> +	{.compatible = "allwinner,sun4i-usb-gates-clk", .data = &sun4i_usb_gates_data,},
> +	{.compatible = "allwinner,sun5i-a13-usb-gates-clk", .data = &sun5i_a13_usb_gates_data,},
>  	{}
>  };

Thanks a lot!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Attachment: signature.asc
Description: Digital signature

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [CentOS ARM]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]     [Photos]