Re: [PATCH 1/3] mmc: add support for power-on sequencing through DT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 01/24/2014 07:35 PM, Fabio Estevam wrote:
On Mon, Jan 20, 2014 at 2:48 PM, Russell King - ARM Linux
<linux@xxxxxxxxxxxxxxxx> wrote:

So far so good.  Now, what about this external oscillator which has its
own separate power control.  My immediate thought is that this can be
specified via card_ext_clock - I would simply need to declare a fixed-rate
clock with either a regulator (power switch) controlled via a gpio (which
would probably be closer to the hardware) or a gpio as an enable... ah,
that requires me to write a common clock driver for that bit since this
is currently not modelled by CCF...

Jiry Sarha posted a gpio controlled clock proposal:
http://www.spinics.net/lists/devicetree/msg16651.html


I have not received too much feedback to my patch yet. CCF is a bit new territory to me, but I think having a separate stackable clk-gpio would be more flexible than having the gpio property implemented in clk-fixed-rate.

Anyway, I am happy do it either way as long as I can get a gpio -controlled clock implementation into the main line.

Cheers,
Jyri


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [CentOS ARM]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]     [Photos]