[PATCH v4 28/37] mtd: st_spi_fsm: Supply a busy wait for post-write status

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



When we write data to the Serial Flash chip we'll wait a predetermined
period of time before giving up. During that period of time we poll the
status register until completion.

Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
---
 drivers/mtd/devices/st_spi_fsm.c | 65 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 65 insertions(+)

diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c
index c64f741..c2ee7e3 100644
--- a/drivers/mtd/devices/st_spi_fsm.c
+++ b/drivers/mtd/devices/st_spi_fsm.c
@@ -236,8 +236,18 @@
 #define FLASH_CMD_READ4_1_1_4  0x6c
 #define FLASH_CMD_READ4_1_4_4  0xec
 
+/* Status register */
+#define FLASH_STATUS_BUSY      0x01
+#define FLASH_STATUS_WEL       0x02
+#define FLASH_STATUS_BP0       0x04
+#define FLASH_STATUS_BP1       0x08
+#define FLASH_STATUS_BP2       0x10
+#define FLASH_STATUS_SRWP0     0x80
+#define FLASH_STATUS_TIMEOUT   0xff
+
 #define FLASH_PAGESIZE         256			/* In Bytes    */
 #define FLASH_PAGESIZE_32      (FLASH_PAGESIZE / 4)	/* In uint32_t */
+#define FLASH_MAX_BUSY_WAIT    (300 * HZ)	/* Maximum 'CHIPERASE' time */
 
 /*
  * Flags to tweak operation of default read/write/erase routines
@@ -517,6 +527,22 @@ static struct stfsm_seq stfsm_seq_read_jedec = {
 		    SEQ_CFG_STARTSEQ),
 };
 
+static struct stfsm_seq stfsm_seq_read_status_fifo = {
+	.data_size = TRANSFER_SIZE(4),
+	.seq_opc[0] = (SEQ_OPC_PADS_1 |
+		       SEQ_OPC_CYCLES(8) |
+		       SEQ_OPC_OPCODE(FLASH_CMD_RDSR)),
+	.seq = {
+		STFSM_INST_CMD1,
+		STFSM_INST_DATA_READ,
+		STFSM_INST_STOP,
+	},
+	.seq_cfg = (SEQ_CFG_PADS_1 |
+		    SEQ_CFG_READNOTWRITE |
+		    SEQ_CFG_CSDEASSERT |
+		    SEQ_CFG_STARTSEQ),
+};
+
 static struct stfsm_seq stfsm_seq_erase_sector = {
 	/* 'addr_cfg' configured during initialisation */
 	.seq_opc = {
@@ -692,6 +718,45 @@ static int stfsm_enter_32bit_addr(struct stfsm *fsm, int enter)
 	return 0;
 }
 
+static uint8_t stfsm_wait_busy(struct stfsm *fsm)
+{
+	struct stfsm_seq *seq = &stfsm_seq_read_status_fifo;
+	unsigned long deadline;
+	uint32_t status;
+
+	/* Use RDRS1 */
+	seq->seq_opc[0] = (SEQ_OPC_PADS_1 |
+			   SEQ_OPC_CYCLES(8) |
+			   SEQ_OPC_OPCODE(FLASH_CMD_RDSR));
+
+	/* Load read_status sequence */
+	stfsm_load_seq(fsm, seq);
+
+	/* Repeat until busy bit is deasserted, or timeout */
+	deadline = jiffies + FLASH_MAX_BUSY_WAIT;
+	do {
+		cond_resched();
+
+		stfsm_wait_seq(fsm);
+
+		stfsm_read_fifo(fsm, &status, 4);
+		if ((status & FLASH_STATUS_BUSY) == 0)
+			return 0;
+
+		/* Restart */
+		writel(seq->seq_cfg, fsm->base + SPI_FAST_SEQ_CFG);
+
+	} while (!time_after_eq(jiffies, deadline));
+
+	stfsm_read_fifo(fsm, &status, 4);
+	if ((status & FLASH_STATUS_BUSY) == 0)
+		return 0;
+
+	dev_err(fsm->dev, "timeout on wait_busy\n");
+
+	return -EIO;
+}
+
 static int stfsm_wrvcr(struct stfsm *fsm, uint8_t data)
 {
 	struct stfsm_seq *seq = &stfsm_seq_wrvcr;
-- 
1.8.3.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [CentOS ARM]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]     [Photos]