Re: [PATCH 6/7] clk/samsung: add support for pll2650xx

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Tomasz,

On 19 December 2013 17:15, Tomasz Figa <t.figa@xxxxxxxxxxx> wrote:
> Hi Rahul,
>
> On Friday 06 of December 2013 21:26:30 Rahul Sharma wrote:
>> Add support for pll2650xx in samsung pll file. This pll variant
>> is close to pll36xx but uses CON2 registers instead of CON1.
>
> If the ops are otherwise idential, why not reuse the ops for pll36xx
> and use CON1 or CON2 register conditionally based on pll->type field?
> (Just as it is already done for pll4600, 4650 and 4650c.)
>

I verified the difference and found that  pll2650xx is fairly
different in terms of
Bit Fields, Con2 register, and additional PLL config bits than pll36xx. Due to
this, I have to add lot of if-else code based on pll type which
doesn't looks clean.

Regards,
Rahul Sharma.

> Best regards,
> Tomasz
>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [CentOS ARM]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]     [Photos]