[PATCH 0/8] UBI: add max_beb_per1024 parameter / ioctl

[Richard Genoud <richard.genoud@xxxxxxxxx>]

Artem,
This patch serie introduce, step by step the kernel module parameter
max_beb_per1024, then the ioctl and finally drop the kernel config option
CONFIG_MTD_UBI_BEB_LIMIT.

It's based on top of linux-ubi/master (and I added your patch on
sam9_l9260_defconfig).
BTW, I let the BEB value at 30 in sam9_l9260_defconfig, you can set it at 25 if
you want (as it's the value from the datasheet).

Best Regards

Richard.

Artem Bityutskiy (1):
  arm: sam9_l9260_defconfig: adjust UBI bad eraseblocks limit

Richard Genoud (7):
  UBI: separate bad_peb_limit in a function
  UBI: introduce MTD_PARAM_MAX_COUNT
  UBI: prepare for max_beb_per1024 module parameter addition
  UBI: check max_beb_per1024 value in ubi_attach_mtd_dev
  UBI: replace MTD_UBI_BEB_LIMIT with module parameter
  UBI: add ioctl for max_beb_per1024
  UBI: drop CONFIG_MTD_UBI_BEB_LIMIT

 arch/arm/configs/sam9_l9260_defconfig |    1 -
 drivers/mtd/ubi/Kconfig               |   26 -------
 drivers/mtd/ubi/build.c               |  116 +++++++++++++++++++++-----------
 drivers/mtd/ubi/cdev.c                |    3 +-
 drivers/mtd/ubi/ubi.h                 |    6 ++-
 include/mtd/ubi-user.h                |   19 +++++-
 6 files changed, 101 insertions(+), 70 deletions(-)

-- 
1.7.2.5


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel