Re: [PATCH] [v3] i.MX27: Fix emma-prp clocks in mx2_camera.c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 20 Jul 2012, javier Martin wrote:

> On 20 July 2012 13:19, Guennadi Liakhovetski <g.liakhovetski@xxxxxx> wrote:
> > Hi Javier
> >
> > Thanks for the patch
> >
> > On Mon, 9 Jul 2012, javier Martin wrote:
> >
> >> On 9 July 2012 10:07, Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> wrote:
> >> > On Mon, Jul 09, 2012 at 09:46:03AM +0200, javier Martin wrote:
> >> >> On 9 July 2012 09:43, Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> wrote:
> >> >> > On Mon, Jul 09, 2012 at 09:37:25AM +0200, javier Martin wrote:
> >> >> >> On 9 July 2012 09:28, Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> wrote:
> >> >> >> > On Fri, Jul 06, 2012 at 12:56:02PM +0200, Javier Martin wrote:
> >> >> >> >> This driver wasn't converted to the new clock changes
> >> >> >> >> (clk_prepare_enable/clk_disable_unprepare). Also naming
> >> >> >> >> of emma-prp related clocks for the i.MX27 was not correct.
> >> >> >> >> ---
> >> >> >> >> Enable clocks only for i.MX27.
> >> >> >> >>
> >> >> >> >
> >> >> >> > Indeed,
> >> >> >> >
> >> >> >> >>
> >> >> >> >> -     pcdev->clk_csi = clk_get(&pdev->dev, NULL);
> >> >> >> >> -     if (IS_ERR(pcdev->clk_csi)) {
> >> >> >> >> -             dev_err(&pdev->dev, "Could not get csi clock\n");
> >> >> >> >> -             err = PTR_ERR(pcdev->clk_csi);
> >> >> >> >> -             goto exit_kfree;
> >> >> >> >> +     if (cpu_is_mx27()) {
> >> >> >> >> +             pcdev->clk_csi = devm_clk_get(&pdev->dev, "ahb");
> >> >> >> >> +             if (IS_ERR(pcdev->clk_csi)) {
> >> >> >> >> +                     dev_err(&pdev->dev, "Could not get csi clock\n");
> >> >> >> >> +                     err = PTR_ERR(pcdev->clk_csi);
> >> >> >> >> +                     goto exit_kfree;
> >> >> >> >> +             }
> >> >> >> >
> >> >> >> > but why? Now the i.MX25 won't get a clock anymore.
> >> >> >>
> >> >> >> What are the clocks needed by i.MX25? csi only?
> >> >> >>
> >> >> >> By the way, is anybody using this driver with i.MX25?
> >> >> >
> >> >> > It seems Baruch (added to Cc) has used it on an i.MX25.
> >> >>
> >> >> Baruch,
> >> >> could you tell us what are the clocks needed by i.MX25?
> >> >
> >> > I just had a look and the i.MX25 it needs three clocks: ipg, ahb and
> >> > peripheral clock. So this is broken anyway and should probably be fixed
> >> > seperately, that is:
> >> >
> >> > - provide dummy clocks for the csi clocks on i.MX27
> >> > - clk_get ipg, ahb and peripheral clocks on all SoCs
> >> > - clk_get emma clocks on i.MX27 only
> >> >
> >> > As said, this is a separate topic, so your original patch should be fine
> >> > for now.
> >
> > Well, sorry, but I don't think I can share this.
> >
> > 1. it touches two areas - arch/ and drivers/ which isnÄt a good thing and
> >    should be avoided wherever possible
> > 2. it addresses several problems: (a) missing name for "ahb" camera clock,
> >    (b) wrong device and connection names for emma clocks, (c) missing
> >    _(un)prepare suffixes in clock API
> > 3. it makes a possibly broken i.MX25 even more broken
> >
> > IIUC, mx2-camera is broken on i.MX27 in current next because of wrong
> > clock entries, right? So, we don't have to be bothered not to break
> > bisection - it is already broken. Then we can clean up the problems
> > separately under arch/ and drivers/.
> >
> > So, would it be possible to split this into 3 parts:
> >
> > (a) arch - fix clocks
> > (b) media - fix clocks on i.MX27 _without_ breaking it even further on
> >     i.MX25. If we think i.MX25 support is already broken, let's schedule
> >     its removal and remove properly, or add BROKEN to Kconfig, when built
> >     on i.MX25. In your patch this would mean just adding an "else" to your
> >     "if (cpu_is_mx27())" statement and moving the current clk_get() there
> > (c) add _(un)prepare.
> >
> > Since these are fixes, I won't wait too long for these. If you don't
> > resubmit them today, they'll go in after 3.6-rc1.
> >
> > Thanks
> > Guennadi
> >
> >> OK, thanks for your interest.
> >>
> >> Regards.
> >> --
> >> Javier Martin
> >> Vista Silicon S.L.
> >> CDTUC - FASE C - Oficina S-345
> >> Avda de los Castros s/n
> >> 39005- Santander. Cantabria. Spain
> >> +34 942 25 32 60
> >> www.vista-silicon.com
> >>
> >
> 
> Hi Guennadi,
> thanks for your review.
> 
> I could agree with some of your reasons for not accepting this patch.
> Specially (1) and (2).
> As regards of reason (3), i.MX25 has been broken for months and I
> refuse that a broken chip that no known board in the mainline uses is
> constantly slowing the development process.
> 
> Furthermore, I sent v3 of this patch 11 days ago. I know you are a
> busy developer but, honestly, it doesn't seem fair that, having sent
> the patch with plenty of time I am now given only this little time to
> fix it. I'm out of the office right now and I won't come back until
> monday. Couldn't you either make an exception and accept the path or
> give me until monday in the morning to send the new version?
> 
> Alternatively, Sascha, Fabio or any other i.MX27 user could send it
> too if they have the time.
> 
> Otherwise, as you stated it'll have to wait to 3.6-rc1. So 3.5 will be
> broken for i.MX27.

Sorry, now I'm totally lost. Are you saying, that this fix is needed for 
3.5??? Huh, nice...

commit e038ed50a4a767add205094c035b6943e7b30140
Author: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Date:   Fri Mar 9 09:11:46 2012 +0100

    ARM i.MX27: implement clocks using common clock framework

appeared in 3.5-rc4 and broke stuff... Cool. I don't think it was 
mentioned in this patch, that it is for 3.5, was it? So, I naturally 
assumed it was for 3.6. Nice.

So, if I am right, and it'd that patch that broke mx2-camera, my _firm_ 
conviction is, that now days before 3.5 is released, the only right way to 
fix it is to fix _that_ regression and that regression only. I.e., we need 
a patch _only_ to fix clk-imx27.c. For which I anyway cannot help you.

Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [CentOS ARM]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]

  Powered by Linux