Re: Linux Kernel boot up stops after message "Uncompressing Linux....done, booting the kernel"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

On 05/24/2012 07:22 AM, K K wrote:
> Hi,
> We have a lpc-3180 based board and it is up and running fine with 2.6.10
> kernel version. We planned to port our board changes into 2.6.32 kernel
> version.
> As a part of this, we added the architecture dependent  code  (mach
> files)  first. Then we changed some of the kernel upgradations.
> kernel build successfully. When we booting the board with the new 2.6.32
> kernel we are getting following messages and its stops.

I had a similar issue with a Pandaboard and I needed to patch u-boot:

diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h
index d8ac8c0..89f9e89 100644
--- a/include/configs/omap4_common.h
+++ b/include/configs/omap4_common.h
@@ -36,6 +36,7 @@
 #define CONFIG_OMAP44XX                1       /* which is a 44XX */
 #define CONFIG_OMAP4430                1       /* which is in a 4430 */
+#define CONFIG_SYS_DCACHE_OFF  1       /* not d-cache in u-boot */

 /* Get CPU defs */
 #include <asm/arch/cpu.h>

Gr. AvS

linux-arm-kernel mailing list

[Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [PDAs]     [Linux]     [Linux MIPS]     [Yosemite Campsites]     [Photos]

Add to Google Follow linuxarm on Twitter