Re: [PATCH v8 2/3] MTD: add dt parameters for PMECC

[Josh Wu <josh.wu@xxxxxxxxx>]

On 5/23/2012 5:54 PM, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 15:47 Wed 23 May     , Josh Wu wrote:
> > Signed-off-by: Hong Xu<hong.xu@xxxxxxxxx>
> > Signed-off-by: Josh Wu<josh.wu@xxxxxxxxx>
> > ---
> >   .../devicetree/bindings/mtd/atmel-nand.txt         |    7 +++++++
> >   drivers/mtd/nand/atmel_nand.c                      |   20 ++++++++++++++++++++
> >   2 files changed, 27 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
> > index a200695..895d72b 100644
> > --- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt
> > +++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
> > @@ -16,6 +16,12 @@ Optional properties:
> >   - nand-ecc-mode : String, operation mode of the NAND ecc mode, soft by default.
> >     Supported values are: "none", "soft", "hw", "hw_syndrome", "hw_oob_first",
> >     "soft_bch".
> > +- atmel,has-pmecc : boolean to enable Programmable Multibit ECC hardware.
> > +  Only supported by at91sam9x5 or later sam9 product.
> > +- atmel,pmecc-cap : error correct capability for Programmable Multibit ECC
> > +  Controller. Supported values are: 2, 4, 8, 12, 24.
> > +- atmel,sector-size : sector size for ECC computation. Supported values are:
> > +  512, 1024.
> pmecc-sector-size as it's pmecc specific

I'll change the name. thanks

> Best Regards,
> J.

Best Regards,
Josh Wu

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel