Re: [PATCH V3 1/2] of: Add generic device tree DMA helpers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 5 May 2012 00:53, Arnd Bergmann <arnd@xxxxxxxx> wrote:
> On Friday 04 May 2012, Jassi Brar wrote:
>> I see this requires a client driver to specify a particular req_line on a
>> particular dma controller. I am not sure if this is most optimal.
>>
>> I think such client->req_line map should be provided to the dmac controller
>> driver via its dt node in some format. The dmac driver could then populate
>> a dma_chan, or similar, only for that req_line and not for the unused one
>> which otherwise could also have served the same client.
>>
>> Ideally the I2C driver should simply ask, say, a channel for TX and another
>> for RX, everything else should already be setup via dmac's dt nodes.
>
> If I understand you correctly, you think we can generalize the dma-request
> data in a way that we don't need to pass a specific dma engine phandle.
> I very much doubt this is possible, given how different the requirements
> are for each of the engines we support. You really need to pass a specific
> phandle so that we can find the code that can interpret the data in a
> meaningful way.
>
Hmm... there ought to be a way by which a client is handed a random 'token'
via its dt node and similarly the dmac informed which channel (and with what
capabilities) to allocate should it see a request coming with that token.

That way dmac and client drivers using DT could do away with the filter_fn.

Roughly speaking (I am not very well versed with DT syntax)

Client Node:-

mmc1: mmc@13002000 {
        ...
        dma_tx = <891>   //some platform-wide unique value
        dma_rx = <927>   //some platform-wide unique value
        ...
 };


Say the PL330 chapter of SoC's trm specifies that "channel_id" for
MMC1_TX is 7 and MMC1_RX is 8 on second instance of PL330.

DMAC's Node:-

pdma2: pdma@10800000 {
         .......
        dma_map = <891, 7>,       //Map mmc1_tx onto i/f 7
                              <927, 8>,      //Map mmc1_rx onto i/f 8
                              <487, 9>,      // Map other dma clients
                                    .......
};

The dma_map could also encode features like duplex, priority etc
depending on the needs of the client and capability of the dmac.
(The "channel_id" could very well be an composite value specifying
more than one parameter.... basically a value private to the dmac driver)

As a positive side effect, the dmac controller could populate channels only
for which some client exists on the machine.

Also the decision to map a client onto one of two or more supporting dmacs
is made here - token 927 wouldn't appear in dma_map of pdma1 even
if it also could do RX for MMC1.

The solution seems so simple that I am already cringing at the thought
of having overlooked something fundamental. Please clarify :)

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel


[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [CentOS ARM]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]

  Powered by Linux