Re: [RFC PATCH 00/11 V5] MXS: Add i.MX28 USB Host driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Do you really need 138 messages (and counting) all threaded together
across the entire history of this patch set?  Please stop posting new
copies of your patch set as followups to the previous set.

Not only does it rob horizontal space for reading the subjects in the
index, but also it either buries your patches ages back or brings the
entire 138 messages to the front of mailboxes, depending on your sort
preferences.  Either way it makes threaded reading of the mailing list
really difficult.

Please stop this antisocial behaviour.  Thanks.

On Tue, Apr 24, 2012 at 05:18:32AM +0200, Marek Vasut wrote:
> From: Marek Vasut <marek.vasut@xxxxxxxxx>
> 
> This patchset introduces the USB Host driver for i.MX28 CPU, utilising the
> generic USB PHY infrastructure. Also added is glue code for CI13xxx driver, to
> allow device mode. This patchset still does NOT support OTG mode, the
> device/host mode is selected via platform data.
> 
> V2: Introduce stub imx-usb driver that then registers the PHY and EHCI drivers.
> V3: Add the HCD on demand based on the PHY's state (only add HCD if it's host).
>     Currently, only the HOST mode is supported.
> V4: * Introduce ci13xxx gadget glue
>     * Reorder patches in a more sensible order
>     * Introduce platform data, containing VBUS GPIO and port mode (device/gadget)
>     * Rename imx-usb to imx-otg
>     * Drop mx28evk usb host patch
>     * Use more devm_ function
>     * Rework the mxs-phy to register the same interrupt as ehci-mxs (and
>       effectivelly kill bogus otg_set_vbus() call from ehci-mxs ; use standard
>       ehci irq handling in ehci-mxs)
> V5: * Finally move OTG IRQ handling into imx-otg
>     * Move imx_otg_set_{host,peripheral}() into imx-otg
>     * Move imx_otg_work() into imx-otg driver (now it all makes sense, yay!)
> 
> Marek Vasut (11):
>   MXS: Make clk_disable return integer
>   MXS: Add USB EHCI and USB PHY clock handling
>   MXS: Fixup i.MX233 USB base address name
>   MXS: Add data shared between imx-otg and EHCI driver
>   MXS: Modify the ci13xxx_udc to avoid adding UDC
>   MXS: Add small registration glue for ci13xxx_udc
>   MXS: Add separate MXS EHCI HCD driver
>   MXS: Add imx-otg driver
>   MXS: Add USB PHY driver
>   MXS: Add platform registration hooks for USB EHCI
>   MXS: Enable USB on M28EVK
> 
>  arch/arm/mach-mxs/Kconfig                       |    2 +
>  arch/arm/mach-mxs/clock-mx28.c                  |   28 +-
>  arch/arm/mach-mxs/devices-mx28.h                |    5 +
>  arch/arm/mach-mxs/devices/Kconfig               |    3 +
>  arch/arm/mach-mxs/devices/Makefile              |    1 +
>  arch/arm/mach-mxs/devices/platform-usb.c        |   85 ++++
>  arch/arm/mach-mxs/include/mach/clock.h          |    2 +-
>  arch/arm/mach-mxs/include/mach/devices-common.h |   13 +
>  arch/arm/mach-mxs/include/mach/mx23.h           |    8 +-
>  arch/arm/mach-mxs/mach-m28evk.c                 |   21 +
>  drivers/usb/gadget/Kconfig                      |   17 +
>  drivers/usb/gadget/Makefile                     |    1 +
>  drivers/usb/gadget/ci13xxx_mxs.c                |   67 ++++
>  drivers/usb/gadget/ci13xxx_udc.c                |   12 +-
>  drivers/usb/gadget/ci13xxx_udc.h                |    1 +
>  drivers/usb/host/Kconfig                        |    7 +
>  drivers/usb/host/ehci-hcd.c                     |    5 +
>  drivers/usb/host/ehci-mxs.c                     |  178 +++++++++
>  drivers/usb/otg/Kconfig                         |   16 +
>  drivers/usb/otg/Makefile                        |    2 +
>  drivers/usb/otg/imx-otg.c                       |  473 +++++++++++++++++++++++
>  drivers/usb/otg/mxs-phy.c                       |  237 ++++++++++++
>  include/linux/usb/mxs-usb.h                     |   95 +++++
>  23 files changed, 1266 insertions(+), 13 deletions(-)
>  create mode 100644 arch/arm/mach-mxs/devices/platform-usb.c
>  create mode 100644 drivers/usb/gadget/ci13xxx_mxs.c
>  create mode 100644 drivers/usb/host/ehci-mxs.c
>  create mode 100644 drivers/usb/otg/imx-otg.c
>  create mode 100644 drivers/usb/otg/mxs-phy.c
>  create mode 100644 include/linux/usb/mxs-usb.h
> 
> Cc: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
> Cc: Detlev Zundel <dzu@xxxxxxx>
> Cc: Fabio Estevam <festevam@xxxxxxxxx>
> Cc: Li Frank-B20596 <B20596@xxxxxxxxxxxxx>
> Cc: Lin Tony-B19295 <B19295@xxxxxxxxxxxxx>
> Cc: Linux USB <linux-usb@xxxxxxxxxxxxxxx>
> Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> Cc: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
> Cc: Shawn Guo <shawn.guo@xxxxxxxxxx>
> Cc: Stefano Babic <sbabic@xxxxxxx>
> Cc: Subodh Nijsure <snijsure@xxxxxxxxxxxx>
> Cc: Tony Lin <tony.lin@xxxxxxxxxxxxx>
> Cc: Wolfgang Denk <wd@xxxxxxx>
> 
> -- 
> 1.7.10
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel


[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [CentOS ARM]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]

  Powered by Linux