|
|
[PATCH] pxa/hx4700: Add standard UART to hx4700_pin_config[] |
Add the two standard UART signals (GPIO46_STUART_RXD, GPIO47_STUART_TXD) to the initial mfp config table hx4700_pin_config[] passed to pxa2xx_mfp_config(). Although pxa2xx_transceiver_mode() can subsequently set these two signals via its own call to pxa2xx_mfp_config(), pxa2xx_transceiver_mode() is only present when CONFIG_PXA_FICP=y. Hence this patch provides a default mfp config. Signed-off-by: Paul Parsons <lost.distance@xxxxxxxxx> --- --- a/arch/arm/mach-pxa/hx4700.c 2012-03-16 15:18:29.636709575 +0000 +++ b/arch/arm/mach-pxa/hx4700.c 2012-03-16 15:19:35.401070040 +0000 @@ -101,6 +101,10 @@ static unsigned long hx4700_pin_config[] GPIO44_BTUART_CTS, GPIO45_BTUART_RTS_LPM_LOW, + /* STUART (IRDA) */ + GPIO46_STUART_RXD, + GPIO47_STUART_TXD, + /* PWM 1 (Backlight) */ GPIO17_PWM1_OUT, _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
[Linux ARM (vger)] [Linux ARM MSM] [Linux Omap] [Linux Arm] [Linux Tegra] [Fedora ARM] [eCos] [Linux Fastboot] [Gcc Help] [Git] [DCCP] [IETF Announce] [Security] [PDAs] [Linux] [Linux MIPS] [Yosemite Campsites] [Photos]
|
|