[Prev Page][Next Page]
- [PATCH 04/14] ARM: shmobile: INTC External IRQ pin driver on r8a7779
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [GIT PULL v2] Renesas INTC External IRQ pin driver
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 02/14] ARM: shmobile: irq_pin() for static IRQ pin assignment
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 12/13] ARM: shmobile: marzen: Use gic_iid macro for ICCIAR / interrupt ID
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 06/13] ARM: shmobile: kzm9g: Reference DT implementation
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 10/13] ARM: shmobile: kzm9g: Remove warning about SMP
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 05/13] ARM: shmobile: marzen: Reference DT implementation
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 13/13] ARM: shmobile: kzm9g: correct smsc regulator registration
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 08/13] ARM: shmobile: SDHI and MMCIF interfaces to kzm9g-reference
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 11/13] ARM: shmobile: kzm9g: Trim reference DT_MACHINE_START
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 09/13] ARM: shmobile: simplify kzm9g Kconfig dependencies
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 03/13] ARM: shmobile: streamline mackerel SD and MMC devices
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 07/13] ARM: shmobile: parse DT and configure pinmux early on kzm9g-reference
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 02/13] ARM: shmobile: switch SDHI0 to GPIO regulator on armadillo800eva
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 04/13] ARM: shmobile: mark mackerel sh_mmcif_device __maybe_unused
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 01/13] ARM: shmobile: use GPIO SD-card detection on armadillo800eva
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [GIT PULL v2] Renesas ARM-based SoC board updates for v3.10
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- ★★★「最新SEO対策の教科書」と「超アクセスアップソフト」をもらってください 18m
- From: ★もっと収入アップ研究部 <deli@xxxxxxxxxxxxx>
- Re: [GIT PULL] Renesas ARM-based SoC fixes for v3.9
- From: Simon Horman <horms@xxxxxxxxxxxx>
- Re: [GIT PULL] AB8500 Power and MFD related updates
- From: Anton Vorontsov <anton@xxxxxxxxxx>
- Re: [PATCH] clk: add DT test clock consumer driver
- From: Mike Turquette <mturquette@xxxxxxxxxx>
- Re: [PATCH 2/2] ARM: OMAP2+: clocks: Pass static parent pointers to common clock core
- From: Mike Turquette <mturquette@xxxxxxxxxx>
- Re: [PATCH 6/8] SERIAL: OMAP: Remove the slave idle handling from the driver
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] [media] ir: IR_RX51 only works on OMAP2
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
- Re: [PATCH] ARM: kirkwood: Add support for NETGEAR ReadyNAS Duo v2 using DT
- From: Jason Cooper <jason@xxxxxxxxxxxxxx>
- Re: [PATCH v3 6/6] irqchip: s3c24xx: add s3c2450 interrupt definitions
- From: Heiko Stübner <heiko@xxxxxxxxx>
- Re: [PATCH] ARM: kirkwood: Add support for NETGEAR ReadyNAS Duo v2 using DT
- From: arno@xxxxxxxxxxxx (Arnaud Ebalard)
- [PATCH v3] mm: Make snapshotting pages for stable writes a per-bio operation
- From: "Darrick J. Wong" <darrick.wong@xxxxxxxxxx>
- Re: [PATCH] mm: Make snapshotting pages for stable writes a per-bio operation
- From: "Darrick J. Wong" <darrick.wong@xxxxxxxxxx>
- Re: [PATCH] bounce:fix bug, avoid to flush dcache on slab page from jbd2.
- From: Jan Kara <jack@xxxxxxx>
- Re: [PATCH] mm: Make snapshotting pages for stable writes a per-bio operation
- From: Jan Kara <jack@xxxxxxx>
- Re: [PATCH v3 6/6] irqchip: s3c24xx: add s3c2450 interrupt definitions
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH] ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH v3 6/6] irqchip: s3c24xx: add s3c2450 interrupt definitions
- From: Rob Herring <robherring2@xxxxxxxxx>
- Re: [PATCH] ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0
- From: Jonathan Nieder <jrnieder@xxxxxxxxx>
- Re: [PATCH v2 1/2] ARM: vexpress: Enable regulator framework when MMCI is in use
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH 2/6] pinctrl: samsung: Include pinctrl-exynos driver data conditionally
- From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
- Re: [PATCH] ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH 1/5] clk: allow reentrant calls into the clk framework
- From: Mike Turquette <mturquette@xxxxxxxxxx>
- [PATCH 6/6] pinctrl: Add pinctrl-s3c64xx driver
- From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
- [PATCH 5/6] pinctrl: samsung: Handle banks with two configuration registers
- From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
- [PATCH 4/6] pinctrl: samsung: Remove hardcoded register offsets
- From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
- [PATCH 3/6] pinctrl: samsung: Split pin bank description into two structures
- From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
- [PATCH 1/6] pinctrl: samsung: Protect bank registers with a spinlock
- From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
- [PATCH 2/6] pinctrl: samsung: Include pinctrl-exynos driver data conditionally
- From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
- [PATCH 0/6] pinctrl: Add support for pin control on S3C64xx
- From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
- Re: [PATCH 1/1] ARM: kirkwood: Fix chip-delay for GoFlex Net
- From: Jason Gunthorpe <jgunthorpe@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/5] clk: allow reentrant calls into the clk framework
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [GIT PULL 3/3] ARM: mvebu: soc for v3.10
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: ep93xx irq-vic regression
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 1/5] clk: allow reentrant calls into the clk framework
- From: Mike Turquette <mturquette@xxxxxxxxxx>
- Re: [U-Boot] [RFC] Kbuild support for ARM FIT images
- From: Wolfgang Denk <wd@xxxxxxx>
- Re: [RFC] Kbuild support for ARM FIT images
- From: Wolfgang Denk <wd@xxxxxxx>
- Re: [PATCH 1/1] ARM: kirkwood: Fix chip-delay for GoFlex Net
- From: Jason Cooper <jason@xxxxxxxxxxxxxx>
- Re: [PATCH 1/1] ARM: kirkwood: Fix chip-delay for GoFlex Net
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: Anyone implement Cortex A9 FIQ
- From: Jonathan Austin <jonathan.austin@xxxxxxx>
- Re: [PATCH v3 5/6] irqchip: s3c24xx: add devicetree support
- From: Rob Herring <robherring2@xxxxxxxxx>
- Re: [PATCH] ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0
- From: Greg KH <greg@xxxxxxxxx>
- Re: [PATCH 29/29] arm64: KVM: enable initialization of a 32bit vcpu
- From: Christopher Covington <cov@xxxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] ARM: vexpress: Enable regulator framework when MMCI is in use
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- [PATCH 1/1] ARM: kirkwood: Fix chip-delay for GoFlex Net
- From: Eric Hutter <hutter.eric@xxxxxxxxx>
- Re: [PATCHv2 3/3] ARM: Work around faulty ISAR0 register in some Krait CPUs
- From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
- Re: [PATCH 28/29] arm64: KVM: 32bit guest fault injection
- From: Christopher Covington <cov@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] driver: serial-omap: move max uart count into generic header file.
- From: Kevin Hilman <khilman@xxxxxxxxxx>
- Re: [PATCHv2 3/3] ARM: Work around faulty ISAR0 register in some Krait CPUs
- From: Will Deacon <will.deacon@xxxxxxx>
- Re: [U-Boot] [RFC] Kbuild support for ARM FIT images
- From: Tom Rini <trini@xxxxxx>
- [PATCHv2 2/3] ARM: Detect support for SDIV/UDIV from ISAR0 register
- From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
- [PATCHv2 1/3] ARM: Clear IDIVT hwcap if CONFIG_ARM_THUMB=n
- From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
- [PATCHv2 3/3] ARM: Work around faulty ISAR0 register in some Krait CPUs
- From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
- [PATCHv2 0/3] Detect UDIV/SDIV support from ISAR0
- From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
- [PATCH] ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0
- From: Marek Vasut <marex@xxxxxxx>
- [PATCH] ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH 3/3] ARM: Work around faulty ISAR0 register in some Krait CPUs
- From: Will Deacon <will.deacon@xxxxxxx>
- Re: [PATCH v2 1/2] ARM: vexpress: Enable regulator framework when MMCI is in use
- From: Pawel Moll <pawel.moll@xxxxxxx>
- Re: [U-Boot] [RFC] Kbuild support for ARM FIT images
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [RFC] Kbuild support for ARM FIT images
- From: Pavel Machek <pavel@xxxxxxx>
- Re: [PATCH v2 1/2] ARM: vexpress: Enable regulator framework when MMCI is in use
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- [PATCH v2 1/2] ARM: vexpress: Enable regulator framework when MMCI is in use
- From: Pawel Moll <pawel.moll@xxxxxxx>
- Re: [RFC] Kbuild support for ARM FIT images
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [RFC] Kbuild support for ARM FIT images
- From: Pavel Machek <pavel@xxxxxxx>
- Re: [RFC] USB: EHCI: hot-fix OMAP and Orion multiplatform config
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v2, part3 02/12] mm/ARM64: kill poison_init_mem()
- From: Jiang Liu <liuj97@xxxxxxxxx>
- Re: [PATCH 04/10] bus: introduce an Marvell EBU MBus driver
- From: Jason Gunthorpe <jgunthorpe@xxxxxxxxxxxxxxxxxxxx>
- Re: OMAP baseline test results for v3.9-rc3
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 2/3] ARM: Detect support for SDIV/UDIV from ISAR0 register
- From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
- Re: [PATCH] ARM: hw_breakpoint: Enable debug powerdown only if system supports 'has_ossr'
- From: Will Deacon <will.deacon@xxxxxxx>
- Re: [PATCH 24/29] arm64: KVM: 32bit conditional execution emulation
- From: Christopher Covington <cov@xxxxxxxxxxxxxx>
- Re: [PATCH 22/29] arm64: KVM: define 32bit specific registers
- From: Christopher Covington <cov@xxxxxxxxxxxxxx>
- Re: [PATCH 3/3] ARM: Work around faulty ISAR0 register in some Krait CPUs
- From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
- Re: [PATCH v2 0/4] ARM: mxs: sanitize enet_out clock handling
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [RFC] USB: EHCI: hot-fix OMAP and Orion multiplatform config
- From: Arnaud Patard (Rtp) <arnaud.patard@xxxxxxxxxxx>
- Re: [PATCH v3 6/6] irqchip: s3c24xx: add s3c2450 interrupt definitions
- From: Heiko Stübner <heiko@xxxxxxxxx>
- Re: some question about monitor mode support in arm
- From: Christopher Covington <cov@xxxxxxxxxxxxxx>
- Re: [RFC] Kbuild support for ARM FIT images
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH v3 0/4] ARM: OMAP2+: Adapt to ehci-omap changes for 3.10
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/2] ARM: OMAP2+: clocks: Pass static parent pointers to common clock core
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [RFC] Kbuild support for ARM FIT images
- From: Pavel Machek <pavel@xxxxxxx>
- Re: OMAP baseline test results for v3.9-rc3
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 04/10] bus: introduce an Marvell EBU MBus driver
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 for 3.10] Introduce a Marvell EBU MBus driver
- From: Jason Cooper <jason@xxxxxxxxxxxxxx>
- Re: OMAP baseline test results for v3.9-rc3
- From: Anca Emanuel <anca.emanuel@xxxxxxxxx>
- Re: [GIT PULL 3/3] ARM: mvebu: soc for v3.10
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 3/6] ARM: remove fa526 CPU support
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [RFC] USB: EHCI: hot-fix OMAP and Orion multiplatform config
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH V3 12/18] ARM: OMAP2+: Add additional GPMC timing parameters
- From: Jon Hunter <jon-hunter@xxxxxx>
- Re: [PATCH v2 for 3.10] Introduce a Marvell EBU MBus driver
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [GIT PULL] arm-soc fixes for v3.9-rc3
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v3 6/6] irqchip: s3c24xx: add s3c2450 interrupt definitions
- From: Rob Herring <robherring2@xxxxxxxxx>
- Re: linux-next: manual merge of the tegra tree with the arm-soc tree
- From: Arnd Bergmann <arnd@xxxxxxxx>
- [PATCH v2] USB: EHCI: hot-fix OMAP and Orion multiplatform config
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH 1/7] kbuild: create an "include chroot" for DT bindings
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [RFC] USB: EHCI: hot-fix OMAP and Orion multiplatform config
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH] ARM: hw_breakpoint: Enable debug powerdown only if system supports 'has_ossr'
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- OMAP baseline test results for v3.9-rc3
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [GIT PULL] arm-soc fixes for v3.9-rc3
- From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 for 3.10] Introduce a Marvell EBU MBus driver
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
- Re: linux-next: manual merge of the tegra tree with the arm-soc tree
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH V4] ARM: dts: add minimal DT support for DevKit8000.
- From: Benoit Cousson <b-cousson@xxxxxx>
- Re: [PATCH] ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0
- From: Marek Vasut <marex@xxxxxxx>
- Re: linux-next: manual merge of the bcm2835 tree with the arm-soc tree
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH Resend v5 00/16] spi/spi-atmel: add dmaengine support for atmel spi controller and to test the device tree support
- From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
- Re: [PATCH 1/7] kbuild: create an "include chroot" for DT bindings
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- Re: [PATCH] ARM: hw_breakpoint: Enable debug powerdown only if system supports 'has_ossr'
- From: Will Deacon <will.deacon@xxxxxxx>
- [PATCH 03/03] ARM: shmobile: APE6EVM LAN9220 support
- From: Magnus Damm <magnus.damm@xxxxxxxxx>
- [PATCH 02/03] ARM: shmobile: APE6EVM PFC support
- From: Magnus Damm <magnus.damm@xxxxxxxxx>
- [PATCH 01/03] ARM: shmobile: APE6EVM base support V2
- From: Magnus Damm <magnus.damm@xxxxxxxxx>
- Re: [PATCH] ARM: mach-moxart: platform port for MOXA ART SoC
- From: Arnd Bergmann <arnd@xxxxxxxx>
- [PATCH 00/03] ARM: shmobile: r8a73a4 APE6EVM board support V2
- From: Magnus Damm <magnus.damm@xxxxxxxxx>
- Re: [PATCH v2 for 3.10] Introduce a Marvell EBU MBus driver
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v3 0/9] refactoring for mask_cache
- From: Simon Guinot <simon.guinot@xxxxxxxxxxxx>
- [PATCH V2 3/3] ARM: net: bpf_jit: add support for jitted seccomp filters.
- From: Nicolas Schichan <nschichan@xxxxxxxxxx>
- [PATCH V2 2/3] ARM: net: bpf_jit: make code generation less dependent on struct sk_filter.
- From: Nicolas Schichan <nschichan@xxxxxxxxxx>
- Re: [GIT PULL 1/3] ARM: mvebu: cleanup for v3.10
- From: Arnd Bergmann <arnd@xxxxxxxx>
- [PATCH V2 1/3] seccomp: add generic code for jitted seccomp filters.
- From: Nicolas Schichan <nschichan@xxxxxxxxxx>
- [PATCH RFC] Support for JIT in Seccomp BPF filters.
- From: Nicolas Schichan <nschichan@xxxxxxxxxx>
- Re: [PATCH v3 0/9] refactoring for mask_cache
- From: Simon Guinot <simon.guinot@xxxxxxxxxxxx>
- Re: [PATCHv1 0/2] ARM: socfpga: Soft reset, hotplug and device tree clocks
- From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
- Re: [PATCH V3 12/18] ARM: OMAP2+: Add additional GPMC timing parameters
- From: Jon Hunter <jon-hunter@xxxxxx>
- Re: [PATCH 03/04] ARM: shmobile: r8a73a4 IRQC support V2
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH] ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- [PATCH 04/04] ARM: shmobile: r8a73a4 PFC support
- From: Magnus Damm <magnus.damm@xxxxxxxxx>
- [PATCH 03/04] ARM: shmobile: r8a73a4 IRQC support V2
- From: Magnus Damm <magnus.damm@xxxxxxxxx>
- [PATCH 02/04] ARM: shmobile: r8a73a4 SCIF support V2
- From: Magnus Damm <magnus.damm@xxxxxxxxx>
- [PATCH 01/04] ARM: shmobile: Initial r8a73a4 SoC support V2
- From: Magnus Damm <magnus.damm@xxxxxxxxx>
- [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V2
- From: Magnus Damm <magnus.damm@xxxxxxxxx>
- Re: [PATCHv1 0/2] ARM: socfpga: Soft reset, hotplug and device tree clocks
- From: Pavel Machek <pavel@xxxxxxx>
- [GIT PULL] arm-soc fixes for v3.9-rc3
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH] ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH V3 12/18] ARM: OMAP2+: Add additional GPMC timing parameters
- From: Rob Herring <robherring2@xxxxxxxxx>
- Re: [PATCH] ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- [PATCH v3 9/9] gpio: mvebu: enable IRQ_GC_SEPARATE_MASK_REGISTERS
- From: Gerlando Falauto <gerlando.falauto@xxxxxxxxxxx>
- [PATCH v3 8/9] orion-gpio: enable IRQ_GC_SEPARATE_MASK_REGISTERS
- From: Gerlando Falauto <gerlando.falauto@xxxxxxxxxxx>
- [PATCH v3 7/9] genirq: handle separate mask registers
- From: Gerlando Falauto <gerlando.falauto@xxxxxxxxxxx>
- [PATCH v3 1/9] genirq: cosmetic: remove cur_regs
- From: Gerlando Falauto <gerlando.falauto@xxxxxxxxxxx>
- [PATCH v3 2/9] genirq: add mask_cache and pmask_cache into struct irq_chip_type
- From: Gerlando Falauto <gerlando.falauto@xxxxxxxxxxx>
- [PATCH v3 3/9] gpio: mvebu: convert to usage of *pmask_cache within irq_chip_type
- From: Gerlando Falauto <gerlando.falauto@xxxxxxxxxxx>
- [PATCH v3 6/9] genirq: rename mask_cache to shared_mask_cache
- From: Gerlando Falauto <gerlando.falauto@xxxxxxxxxxx>
- [PATCH v3 0/9] refactoring for mask_cache
- From: Gerlando Falauto <gerlando.falauto@xxxxxxxxxxx>
- [PATCH v3 4/9] MIPS: JZ4740: convert to usage of *pmask_cache within irq_chip_type
- From: Gerlando Falauto <gerlando.falauto@xxxxxxxxxxx>
- [PATCH v3 5/9] ARM: SAMSUNG: convert to usage of *pmask_cache within irq_chip_type
- From: Gerlando Falauto <gerlando.falauto@xxxxxxxxxxx>
- Re: [PATCH] ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0
- From: Marek Vasut <marex@xxxxxxx>
- [PATCH/RFC] ARM: shmobile: Disallow PINCTRL without GPIOLIB
- From: Magnus Damm <magnus.damm@xxxxxxxxx>
- Re: [PATCH V3 02/18] ARM: OMAP2+: Add variable to store number of GPMC waitpins
- From: Jon Hunter <jon-hunter@xxxxxx>
- Re: [PATCH V3 10/18] ARM: OMAP2+: Add function to read GPMC settings from device-tree
- From: Jon Hunter <jon-hunter@xxxxxx>
- Re: [PATCH] ARM: dts: add usb 2.0 clock references to exynos5250 device tree
- From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
- Re: [PATCH v4 0/6] support other fsl SoCs with usbmisc + small fixes
- From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
- [PATCH/Resend 2/2] arm: mach-omap2: prevent UART console idle on suspend while using "no_console_suspend"
- From: Sourav Poddar <sourav.poddar@xxxxxx>
- Re: [PATCH 0/2] omap serial fix.
- From: Sourav Poddar <sourav.poddar@xxxxxx>
- [PATCH v2] irqchip: Add support for ARMv7-M's NVIC
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH 10/12] clocksource: sh_tmu: Set initcall level to subsys
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 12/12] clocksource: sh_mtu2: Set initcall level to subsys
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 09/12] clocksource: sh_cmt: Set initcall level to subsys
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 11/12] clocksource: em_sti: Set initcall level to subsys
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 05/12] clocksource: sh_cmt: CMSTR and CMCSR register access update
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 06/12] clocksource: sh_cmt: CMCNT and CMCOR register access update
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 07/12] clocksource: sh_cmt: Add control register callbacks
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 08/12] clocksource: sh_cmt: Add CMT register layout comment
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 03/12] clocksource: sh_cmt: Introduce per-register functions
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 04/12] clocksource: sh_cmt: Consolidate platform_set_drvdata() call
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 02/12] clocksource: sh_cmt: Initialize 'max_match_value' and 'lock' in sh_cmt_setup()
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [GIT PULL] ARM and SH based SoC clocksource update for v3.10
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 01/12] clocksource: sh_cmt: Take care of clk_put() when setup_irq() fails
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- Re: [PATCHv1 0/2] ARM: socfpga: Soft reset, hotplug and device tree clocks
- From: Rob Herring <robherring2@xxxxxxxxx>
- Re: [PATCH] ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- [PATCH 33/43] ARM: mach-shmobile: r8a7740: Add DT names to clock list
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- Re: [RFC PATCH 5/8] s5p-fimc: Add ISP video capture driver stubs
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: [PATCH] ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0
- From: Fabio Estevam <fabio.estevam@xxxxxxxxxxxxx>
- [PATCH v3 2/4] ARM: OMAP2+: omap-usb-host: Add usbhs_init_phys()
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH v3 4/4] ARM: OMAP3: Beagle: Adapt to ehci-omap changes
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH v3 3/4] ARM: OMAP2+: omap4panda: Adapt to ehci-omap changes
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH v3 1/4] usb: phy: nop: Add some parameters to platform data
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH v3 0/4] ARM: OMAP2+: Adapt to ehci-omap changes for 3.10
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH] ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- [PATCH 41/43] ARM: mach-shmobile: r8a7779: add SATA support
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 37/43] ARM: shmobile: r8a7779: use gic_iid macro
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 42/43] ARM: shmobile: R8A7779: use gic_iid() in SATA IRQ resource
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 40/43] ARM: mach-shmobile: r8a7779: SATA DT configuration
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 35/43] ARM: shmobile: r8a7779: fixup dtsi typo
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 32/43] ARM: shmobile: Remove unused hotplug.c
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 39/43] ARM: shmobile: r8a7779: add Thermal support on DT
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 38/43] ARM: shmobile: tidyup chip series definition order for r8a7740/r8a7779
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 36/43] ARM: shmobile: r8a7779: fixup DT machine name
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 21/43] ARM: shmobile: sh73a0: Do not use early devices with DT reference
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 31/43] ARM: shmobile: Rearrange r8a7779 cpu hotplug code
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 29/43] ARM: shmobile: Update r8a7779 to use scu_power_mode()
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 22/43] ARM: shmobile: r8a7779: Do not use early devices with DT reference
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 28/43] ARM: shmobile: Update r8a7779 to check SCU for hotplug
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 43/43] r8a7779: Add Display Unit clock support
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 34/43] ARM: shmobile: add gic_iid macro for ICCIAR / interrupt ID
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 25/43] ARM: shmobile: Fix base address readout in headsmp-scu.S
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 24/43] ARM: shmobile: r8a7779: Remove lan from dtsi
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 27/43] ARM: shmobile: Use R8A7779_SCU_BASE with TWD
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 20/43] ARM: shmobile: sh73a0: Remove warning about SMP
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 26/43] ARM: shmobile: Rework SH73A0_SCU_BASE IOMEM() usage
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 19/43] ARM: shmobile: sh73a0: Add smp ops to DT_MACHINE_START
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 30/43] ARM: shmobile: Use sh73a0-specific cpu disable code
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 23/43] ARM: shmobile: r8a7779: Do not initialise i2c as an early device
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 14/43] ARM: shmobile: Common shmobile_scu_base in headsmp-scu.S
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 13/43] ARM: shmobile: Move headsmp-sh73a0.S to headsmp-scu.S
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 18/43] ARM: shmobile: sh73a0: Remove sh73a0_init_irq_dt()
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 15/43] ARM: shmobile: Update EMEV2 to use scu_power_mode()
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 09/43] ARM: mach-shmobile: r8a7779: Minimal setup using DT
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 17/43] ARM: shmobile: sh73a0: fix Z and ZG clock hierarchy
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 12/43] ARM: shmobile: Rework EMEV2 scu_base variable
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 16/43] ARM: shmobile: Make EMEV2 setup functions static
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 08/43] ARM: mach-shmobile: r8a7779: Allow initialisation of GIC by DT
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 07/43] ARM: shmobile: add MMCIF and SDHI DT clock aliases to sh73a0 and r8a7740
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 11/43] ARM: shmobile: Kill off r8a7779 scu_base_addr() function
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 10/43] ARM: shmobile: Kill off sh73a0 scu_base_addr() function
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 06/43] ARM: shmobile: Remove emev2_get_core_count()
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 05/43] ARM: shmobile: Remove r8a7779_get_core_count()
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [GIT PULL v2] Renesas ARM-based SoC updates for v3.10
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 02/43] ARM: shmobile: Remove partial CPU Hotplug from EMEV2
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 01/43] ARM: shmobile: Remove unused headers from hotplug.c
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 04/43] ARM: shmobile: Remove sh73a0_get_core_count()
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 03/43] ARM: shmobile: Move EMEV2 CPU boot vector setup code
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 31/43] ARM: shmobile: Rearrange r8a7779 cpu hotplug code
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- Re: [GIT PULL] Renesas INTC External IRQ pin driver
- From: Simon Horman <horms@xxxxxxxxxxxx>
- Re: [PATCH 43/43] ARM: shmobile: fix kzm9g-reference compile breakage
- From: Simon Horman <horms@xxxxxxxxxxxx>
- Re: [GIT PULL] Renesas ARM-based SoC updates for v3.10
- From: Simon Horman <horms@xxxxxxxxxxxx>
- Re: [GIT PULL] Renesas ARM-based SoC board updates for v3.10
- From: Simon Horman <horms@xxxxxxxxxxxx>
- Re: [PATCH 43/43] ARM: shmobile: fix kzm9g-reference compile breakage
- From: Simon Horman <horms@xxxxxxxxxxxx>
- [PATCH 10/14] irqchip: Renesas IRQC driver
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 13/14] irqchip: intc-irqpin: Initial DT support
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 11/14] ARM: shmobile: Make sh73a0 INTC irqpin platform data static
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 14/14] irqchip: irqc: Add DT support
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 12/14] ARM: shmobile: Make r8a7779 INTC irqpin platform data static
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 08/14] irqchip: intc-irqpin: Make use of devm functions
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 01/14] irqchip: Renesas INTC External IRQ pin driver
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 07/14] irqchip: intc-irqpin: Add force comments
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 09/14] irqchip: intc-irqpin: GPL header for platform data
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 03/14] ARM: shmobile: INTC External IRQ pin driver on sh73a0
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 06/14] irqchip: intc-irqpin: Cache mapped IRQ
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 05/14] irqchip: intc-irqpin: Whitespace fixes
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 04/14] ARM: shmobile: INTC External IRQ pin driver on r8a7779
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [GIT PULL] Renesas INTC External IRQ pin driver
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 02/14] ARM: shmobile: irq_pin() for static IRQ pin assignment
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 08/13] ARM: shmobile: SDHI and MMCIF interfaces to kzm9g-reference
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 13/13] ARM: shmobile: kzm9g: correct smsc regulator registration
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 12/13] ARM: shmobile: marzen: Use gic_iid macro for ICCIAR / interrupt ID
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 06/13] ARM: shmobile: kzm9g: Reference DT implementation
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 10/13] ARM: shmobile: kzm9g: Remove warning about SMP
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 11/13] ARM: shmobile: kzm9g: Trim reference DT_MACHINE_START
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 05/13] ARM: shmobile: marzen: Reference DT implementation
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 07/13] ARM: shmobile: parse DT and configure pinmux early on kzm9g-reference
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 09/13] ARM: shmobile: simplify kzm9g Kconfig dependencies
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 03/13] ARM: shmobile: streamline mackerel SD and MMC devices
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 02/13] ARM: shmobile: switch SDHI0 to GPIO regulator on armadillo800eva
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 01/13] ARM: shmobile: use GPIO SD-card detection on armadillo800eva
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [GIT PULL] Renesas ARM-based SoC board updates for v3.10
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 04/13] ARM: shmobile: mark mackerel sh_mmcif_device __maybe_unused
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- Re: [PATCH 43/43] ARM: shmobile: fix kzm9g-reference compile breakage
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- [PATCH 9/9] ARM: mach-shmobile: marzen: add SATA support
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 8/9] ARM: shmobile: armadillo800eva: enable all errata for cache on defconfig
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 7/9] ARM: mach-shmobile: kzm9g: do not enable REGULATOR_DUMMY in defconfig
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 6/9] ARM: shmobile: armadillo800eva: enable NEON on defconfig
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 5/9] ARM: shmobile: armadillo800eva: enable branch prediction on defconfig
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [GIT PULL] Renesas ARM-based SoC defconfig updates for v3.10
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 1/9] ARM: mach-shmobile: mackerel: enable MMCIF and SDHI in defconfig
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 2/9] ARM: mach-shmobile: mackerel: enable REGULATOR in defconfig
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 3/9] ARM: mach-shmobile: armadillo800eva: enable REGULATOR in defconfig
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 4/9] ARM: shmobile: kzm9g: defconfig: do not enable PREEMPT
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 41/43] ARM: mach-shmobile: r8a7779: add SATA support
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 37/43] ARM: shmobile: r8a7779: use gic_iid macro
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 43/43] ARM: shmobile: fix kzm9g-reference compile breakage
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 42/43] ARM: shmobile: R8A7779: use gic_iid() in SATA IRQ resource
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 40/43] ARM: mach-shmobile: r8a7779: SATA DT configuration
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 39/43] ARM: shmobile: r8a7779: add Thermal support on DT
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 32/43] ARM: shmobile: Remove unused hotplug.c
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 38/43] ARM: shmobile: tidyup chip series definition order for r8a7740/r8a7779
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 36/43] ARM: shmobile: r8a7779: fixup DT machine name
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 33/43] ARM: mach-shmobile: r8a7740: Add DT names to clock list
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 35/43] ARM: shmobile: r8a7779: fixup dtsi typo
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 21/43] ARM: shmobile: sh73a0: Do not use early devices with DT reference
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 34/43] ARM: shmobile: add gic_iid macro for ICCIAR / interrupt ID
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 29/43] ARM: shmobile: Update r8a7779 to use scu_power_mode()
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 30/43] ARM: shmobile: Use sh73a0-specific cpu disable code
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 22/43] ARM: shmobile: r8a7779: Do not use early devices with DT reference
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 15/43] ARM: shmobile: Update EMEV2 to use scu_power_mode()
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 27/43] ARM: shmobile: Use R8A7779_SCU_BASE with TWD
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 23/43] ARM: shmobile: r8a7779: Do not initialise i2c as an early device
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 25/43] ARM: shmobile: Fix base address readout in headsmp-scu.S
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 26/43] ARM: shmobile: Rework SH73A0_SCU_BASE IOMEM() usage
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 28/43] ARM: shmobile: Update r8a7779 to check SCU for hotplug
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 24/43] ARM: shmobile: r8a7779: Remove lan from dtsi
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 19/43] ARM: shmobile: sh73a0: Add smp ops to DT_MACHINE_START
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 13/43] ARM: shmobile: Move headsmp-sh73a0.S to headsmp-scu.S
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 09/43] ARM: mach-shmobile: r8a7779: Minimal setup using DT
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 14/43] ARM: shmobile: Common shmobile_scu_base in headsmp-scu.S
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 18/43] ARM: shmobile: sh73a0: Remove sh73a0_init_irq_dt()
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 17/43] ARM: shmobile: sh73a0: fix Z and ZG clock hierarchy
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 11/43] ARM: shmobile: Kill off r8a7779 scu_base_addr() function
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 10/43] ARM: shmobile: Kill off sh73a0 scu_base_addr() function
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 12/43] ARM: shmobile: Rework EMEV2 scu_base variable
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 20/43] ARM: shmobile: sh73a0: Remove warning about SMP
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 08/43] ARM: mach-shmobile: r8a7779: Allow initialisation of GIC by DT
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 16/43] ARM: shmobile: Make EMEV2 setup functions static
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 07/43] ARM: shmobile: add MMCIF and SDHI DT clock aliases to sh73a0 and r8a7740
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 06/43] ARM: shmobile: Remove emev2_get_core_count()
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 05/43] ARM: shmobile: Remove r8a7779_get_core_count()
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 04/43] ARM: shmobile: Remove sh73a0_get_core_count()
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 03/43] ARM: shmobile: Move EMEV2 CPU boot vector setup code
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [GIT PULL] Renesas ARM-based SoC updates for v3.10
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 02/43] ARM: shmobile: Remove partial CPU Hotplug from EMEV2
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 01/43] ARM: shmobile: Remove unused headers from hotplug.c
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 139/142] ARM: shmobile: r8a7779: Remove HSPI function GPIOs
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 128/142] ARM: shmobile: sh73a0: Remove pull-up function GPIOS
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 132/142] ARM: shmobile: sh73a0: Remove IrDA function GPIOs
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 135/142] ARM: shmobile: r8a7779: Remove DU1_DOTCLKOUT1 GPIO
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- Re: [PATCH v3] clk: add si5351 i2c common clock driver
- From: Daniel Mack <zonque@xxxxxxxxx>
- Re: [PATCH 3/6] ARM: remove fa526 CPU support
- From: Florian Fainelli <florian@xxxxxxxxxxx>
- Re: [PATCH 10/10] drivers: misc: use module_platform_driver_probe()
- From: Arnd Bergmann <arnd@xxxxxxxx>
- [PATCH 121/142] sh-pfc: r8a7779: Remove LBSC function GPIOS
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 044/142] sh-pfc: Drop unused support for 1:1 physical to virtual memory mappings
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 047/142] sh-pfc: Remove configuration dry-run and free
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 045/142] sh-pfc: Don't modify pinmux_data_reg SoC data
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 105/142] sh-pfc: sh73a0: Remove LCD and LCD2 function GPIOS
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 066/142] sh-pfc: r8a7740: Add LCDC0 and LCDC1 pin groups and functions
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 036/142] sh: sh7724: Add pin control resources
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 085/142] ARM: shmobile: bonito: Register pinctrl mappings for LCDC0
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 042/142] sh-pfc: Move GPIO registers access functions to gpio.c
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 095/142] ARM: shmobile: kzm9g: Register pinctrl mappings for BSC
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 097/142] ARM: shmobile: mackerel: Register pinctrl mappings for SDHI and MMCIF
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 035/142] sh: sh7723: Add pin control resources
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 116/142] sh-pfc: r8a7779: Remove DU1_DOTCLKOUT1 GPIO
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 053/142] sh-pfc: Convert message printing from pr_* to dev_*
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 028/142] ARM: shmobile: mackerel: Replace GPIO_PORTx enum with GPIO port numbers
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 039/142] sh: sh7786: Add pin control resources
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 025/142] ARM: shmobile: ap4-evb: Replace GPIO_PORTx enum with GPIO port numbers
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 040/142] sh: shx3: Add pin control resources
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 112/142] sh-pfc: sh73a0: Remove USB function GPIOS
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 051/142] sh-pfc: Merge sh_pfc_reconfig_pin() into sh_pfc_gpio_set_direction()
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 065/142] sh-pfc: sh73a0: Add IrDA pin groups and functions
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 034/142] sh: sh7722: Add pin control resources
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 033/142] sh: sh7720: Add pin control resources
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 073/142] sh-pfc: r8a7779: Add USB pin groups and functions
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 024/142] ARM: shmobile: sh73a0: Support sparse GPIO numbers
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 084/142] ARM: shmobile: armadillo800eva: Register pinctrl mappings for SDHI and MMCIF
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 122/142] sh-pfc: r8a7779: Remove INTC function GPIOS
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 123/142] ARM: shmobile: sh7372: Remove SDHI and MMCIF function GPIOs
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 030/142] sh: sh7203: Add pin control resources
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 021/142] sh-pfc: Add function to retrieve a pin instance from its pin number
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 056/142] sh-pfc: sh73a0: Add bias (pull-up/down) pinconf support
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 032/142] sh: sh7269: Add pin control resources
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 091/142] ARM: shmobile: kzm9g: Register pinctrl mappings for SCIF
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 052/142] sh-pfc: Clean up pin configuration type handling
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 110/142] sh-pfc: sh73a0: Remove KEYSC function GPIOS
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 046/142] sh-pfc: Don't modify sh_pfc_pin SoC data
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 081/142] ARM: shmobile: ag5evm: Register pinctrl mappings for IrDA
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 049/142] sh-pfc: Use proper error codes
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 088/142] ARM: shmobile: kota2: Register pinctrl mappings for KEYSC
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 119/142] sh-pfc: r8a7779: Remove HSPI function GPIOS
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 100/142] ARM: shmobile: marzen: Register pinctrl mappings for HSPI
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 107/142] sh-pfc: sh73a0: Remove I2C function GPIOS
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 089/142] ARM: shmobile: kota2: Register pinctrl mappings for BSC
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 086/142] ARM: shmobile: kota2: Register pinctrl mappings for SCIF
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 076/142] ARM: shmobile: ag5evm: Register pinctrl mappings for SCIF
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 101/142] ARM: shmobile: marzen: Register pinctrl mappings for USB
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 072/142] sh-pfc: r8a7779: Add USB0 and USB1 PENC pinmux support
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 096/142] ARM: shmobile: kzm9g: Register pinctrl mappings for USB
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- Re: [PATCH 10/10] drivers: misc: use module_platform_driver_probe()
- From: Fabio Porcedda <fabio.porcedda@xxxxxxxxx>
- [PATCH v2] ARM: tegra114: add speedo-based process identification
- From: Danny Huang <dahuang@xxxxxxxxxx>
- Re: Kirkwood NSA 310 does not boot with 3.8.3
- From: Jason Cooper <jason@xxxxxxxxxxxxxx>
- Re: [PATCH 3/6] ARM: remove fa526 CPU support
- From: Arnd Bergmann <arnd@xxxxxxxx>
- [PATCH 138/142] ARM: shmobile: r8a7779: Remove SCIF function GPIOs
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 137/142] ARM: shmobile: r8a7779: Remove SDHI and MMCIF function GPIOs
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 141/142] ARM: shmobile: r8a7779: Remove LBSC function GPIOs
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 142/142] ARM: shmobile: r8a7779: Remove INTC function GPIOs
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 140/142] ARM: shmobile: r8a7779: Remove USB function GPIOs
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 136/142] ARM: shmobile: r8a7779: Remove DU function GPIOs
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 133/142] ARM: shmobile: r8a7740: Remove LCD0 and LCD1 function GPIOs
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 125/142] ARM: shmobile: sh73a0: Remove SCIFA and SCIFB function GPIOs
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 134/142] ARM: shmobile: r8a7740: Remove SDHI and MMCIF function GPIOs
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 127/142] ARM: shmobile: sh73a0: Remove FSI function GPIOs
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 124/142] ARM: shmobile: sh73a0: Remove LCDC and LCDC2 function GPIOs
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 118/142] sh-pfc: r8a7779: Remove SCIF function GPIOS
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 126/142] ARM: shmobile: sh73a0: Remove I2C function GPIOs
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 129/142] ARM: shmobile: sh73a0: Remove KEYSC function GPIOs
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 117/142] sh-pfc: r8a7779: Remove SDHI and MMCIF function GPIOS
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 131/142] ARM: shmobile: sh73a0: Remove USB function GPIOs
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 120/142] sh-pfc: r8a7779: Remove USB function GPIOS
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 130/142] ARM: shmobile: sh73a0: Remove BSC function GPIOs
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 109/142] sh-pfc: sh73a0: Remove pull-up function GPIOS
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 111/142] sh-pfc: sh73a0: Remove BSC function GPIOS
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 115/142] sh-pfc: r8a7740: Remove SDHI and MMCIF function GPIOS
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 114/142] sh-pfc: r8a7740: Remove LCD0 and LCD1 function GPIOS
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 113/142] sh-pfc: sh73a0: Remove IrDA function GPIOS
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 104/142] sh-pfc: sh7372: Remove SDHI and MMCIF function GPIOS
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 106/142] sh-pfc: sh73a0: Remove SCIFA and SCIFB function GPIOS
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 108/142] sh-pfc: sh73a0: Remove FSI function GPIOS
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 103/142] ARM: shmobile: marzen: Register pinctrl mappings for INTC
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 102/142] ARM: shmobile: marzen: Register pinctrl mappings for LBSC
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 094/142] ARM: shmobile: kzm9g: Register pinctrl mappings for SDHI and MMCIF
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 098/142] ARM: shmobile: marzen: Register pinctrl mappings for SDHI and MMCIF
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 099/142] ARM: shmobile: marzen: Register pinctrl mappings for SCIF
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 090/142] ARM: shmobile: kzm9g: Register pinctrl mappings for LCD
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 093/142] ARM: shmobile: kzm9g: Register pinctrl mappings for FSI
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 087/142] ARM: shmobile: kota2: Register pinctrl mappings for SDHI and MMCIF
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 092/142] ARM: shmobile: kzm9g: Register pinctrl mappings for I2C
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 083/142] ARM: shmobile: armadillo800eva: Register pinctrl mappings for LCDC0
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 079/142] ARM: shmobile: ag5evm: Register pinctrl mappings for SDHI and MMCIF
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 082/142] ARM: shmobile: ap4evb: Register pinctrl mappings for SDHI and MMCIF
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 080/142] ARM: shmobile: ag5evm: Register pinctrl mappings for KEYSC
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 075/142] sh-pfc: r8a7779: Add INTC pin groups and functions
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 078/142] ARM: shmobile: ag5evm: Register pinctrl mappings for FSI
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 003/142] sh-pfc: Fix a typo and simplify a definition on sh73a0
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 002/142] sh-pfc: Don't define the per-device pinctrl struct instances as global
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 068/142] sh-pfc: r8a7779: Add DU pin groups and functions
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 069/142] sh-pfc: r8a7779: Add SDHI and MMCIF pin groups and functions
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 077/142] ARM: shmobile: ag5evm: Register pinctrl mappings for I2C
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 074/142] sh-pfc: r8a7779: Add LBSC pin groups and functions
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 070/142] sh-pfc: r8a7779: Add SCIF pin groups and functions
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 067/142] sh-pfc: r8a7740: Add SDHI and MMCIF pin groups and functions
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 071/142] sh-pfc: r8a7779: Add HSPI pin groups and functions
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 063/142] sh-pfc: sh73a0: Add BSC pin groups and functions
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 048/142] sh-pfc: Constify all SoC data
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 061/142] sh-pfc: sh73a0: Add SDHI and MMCIF pin groups and functions
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 057/142] sh-pfc: sh73a0: Add LCD and LCD2 pin groups and functions
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 058/142] sh-pfc: sh73a0: Add SCIFA and SCIFB pin groups and functions
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 062/142] sh-pfc: sh73a0: Add KEYSC pin groups and functions
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 060/142] sh-pfc: sh73a0: Add FSI pin groups and functions
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 055/142] sh-pfc: sh7372: Add SDHCI and MMCIF pin groups and functions
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 064/142] sh-pfc: sh73a0: Add USB pin groups and functions
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 059/142] sh-pfc: sh73a0: Add I2C2 and I2C3 pin groups and functions
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 050/142] sh-pfc: Implement generic pinconf support
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 043/142] sh-pfc: Don't map data registers individually
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 054/142] sh-pfc: Return an error if a pin doesn't support the requested direction
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 029/142] sh-pfc: Expose real groups and functions in pinctrl/pinmux operations
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 041/142] sh-pfc: Fix return value check in sh_pfc_register_pinctrl()
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 026/142] ARM: shmobile: armadillo: Replace GPIO_PORTx enum with GPIO port numbers
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 037/142] sh: sh7757: Add pin control resources
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 038/142] sh: sh7785: Add pin control resources
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 018/142] sh-pfc: Share the PORT_10_REV, PORT_32 and PORT_32_REV definitions
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 023/142] sh-pfc: Add support for sparse pin numbers
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 031/142] sh: sh7264: Add pin control resources
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 027/142] ARM: shmobile: bonito: Replace GPIO_PORTx enum with GPIO port numbers
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 014/142] sh-pfc: Split pins and functions definition tables
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 020/142] sh-pfc: Simplify the sh_pfc_gpio_is_pin() logic
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 019/142] sh-pfc: Use pinmux identifiers in the pin muxing API
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 017/142] sh-pfc: Look up IRQ table entries by GPIO number
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 015/142] sh-pfc: Split pins and functions into separate gpio_chip instances
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 016/142] sh-pfc: Rename struct pinmux_pin to struct sh_pfc_pin
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 022/142] sh-pfc: Replace pinctrl_add_gpio_range() with gpiochip_add_pin_range()
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 012/142] sh-pfc: Shrink the pinctrl GPIO range to include real GPIOs only
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 009/142] sh-pfc: Remove unused sh_pfc_soc_info reserved_id field
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 010/142] sh-pfc: Initialize pinmux_gpio flags statically
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 008/142] sh-pfc: Replace SoC info data and mark ranges with a number of pins
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 007/142] sh-pfc: Replace first_gpio and last_gpio with nr_gpios
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 013/142] sh-pfc: Don't needlessly check GPIO type in sh_gpio_free()
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 011/142] sh-pfc: Make struct pinmux_gpio enum_id field const
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [GIT PULL] Renesas ARM and SH based SoC pinmux update for v3.10
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 005/142] sh-pfc: Don't take the sh_pfc spinlock in sh_pfc_map_gpios()
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 004/142] sh-pfc: Drop the sh_pfc_pinctrl spinlock
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- [PATCH 001/142] sh-pfc: Declare operation structures as const
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- Re: [PATCH] genirq: allow an alternative setup for the mask cache
- From: Gerlando Falauto <gerlando.falauto@xxxxxxxxxxx>
- [PATCH] ARM: ux500: select WATCHDOG and MUSB for ux500
- From: Fabio Baltieri <fabio.baltieri@xxxxxxxxxx>
- Re: [PATCH 10/10] drivers: misc: use module_platform_driver_probe()
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH V4 1/4] cpufreq: exynos: Adding cpufreq driver for exynos5440
- From: amit kachhap <amit.kachhap@xxxxxxxxx>
- Re: [GIT PULL] Renesas ARM-based SoC fixes for v3.9
- From: Arnd Bergmann <arnd@xxxxxxxx>
- [PATCH 2/2] arm: mach-omap2: prevent UART console idle on suspend while using "no_console_suspend"
- From: Sourav Poddar <sourav.poddar@xxxxxx>
- [PATCH 1/2] driver: serial-omap: move max uart count into generic header file.
- From: Sourav Poddar <sourav.poddar@xxxxxx>
- [PATCH 0/2] omap serial fix.
- From: Sourav Poddar <sourav.poddar@xxxxxx>
- Re: [PATCH] clk: vexpress: Add separate SP810 driver
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
- Re: [PATCH V6] ARM: LPAE: Fix mapping in alloc_init_section for unaligned addresses
- From: Sricharan R <r.sricharan@xxxxxx>
- Re: [PATCH V6] ARM: LPAE: Fix mapping in alloc_init_section for unaligned addresses
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- [PATCH v3] clk: add si5351 i2c common clock driver
- From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
- Re: [PATCH 3/6] usb: ehci: mv_ehci: remove unused clock
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: [RFC 1/1] clk: Add notifier support in clk_prepare_enable/clk_disable_unprepare
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [GIT PULL] Renesas ARM-based SoC fixes for v3.9
- From: Simon Horman <horms@xxxxxxxxxxxx>
- Re: [PATCH] clk: let mxs specific clk-div clock type be a generic clock type
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH 3/6] ARM: remove fa526 CPU support
- From: Jonas Jensen <jonas.jensen@xxxxxxxxx>
- Re: [PATCH] clk: let mxs specific clk-div clock type be a generic clock type
- From: Thomas Abraham <thomas.abraham@xxxxxxxxxx>
- Re: [PATCH V2 0/8] ARM: dts: Various OMAP2+ device-tree updates
- From: Benoit Cousson <b-cousson@xxxxxx>
- Re: [PATCH 10/10] drivers: misc: use module_platform_driver_probe()
- From: Fabio Porcedda <fabio.porcedda@xxxxxxxxx>
- Re: [PATCH v6 1/2] ARM: davinci: dm365: add support for v4l2 video display
- From: Sekhar Nori <nsekhar@xxxxxx>
- Re: some question about monitor mode support in arm
- From: loody <miloody@xxxxxxxxx>
- Re: Kirkwood NSA 310 does not boot with 3.8.3
- From: Lukas Zapletal <lukas-x@xxxxxxxxxxxxxxx>
- Re: [PATCH v6 1/2] ARM: davinci: dm365: add support for v4l2 video display
- From: Prabhakar Lad <prabhakar.csengg@xxxxxxxxx>
- [PATCH] pinctrl:sirf:re-arch and add support for new SiRFatlas6 SoC
- From: Barry Song <Barry.Song@xxxxxxx>
- Re: [PATCH v5 1/2] ARM: davinci: dm355: add support for v4l2 video display
- From: Prabhakar Lad <prabhakar.csengg@xxxxxxxxx>
- Re: [PATCH 2/2] genirq: move mask_cache into struct irq_chip_type
- From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: sirf: get the i2c pin group by pinctrl api
- From: Barry Song <21cnbao@xxxxxxxxx>
- Re: [PATCH] ARM: imx: apf51dev: add ecspi1, ecspi2 and i2c2 support
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- Re: [PATCH] clk: let mxs specific clk-div clock type be a generic clock type
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- Re: [PATCH] i2c: sirf: get the i2c pin group by pinctrl api
- From: Sourav Poddar <sourav.poddar@xxxxxx>
- [PATCH V2] ARM: tegra: cpuidle: remove redundant parameters for powered-down mode
- From: Joseph Lo <josephl@xxxxxxxxxx>
- Re: [PATCH v6 1/2] ARM: davinci: dm365: add support for v4l2 video display
- From: Sekhar Nori <nsekhar@xxxxxx>
- Re: [PATCH 2/2] ARM: OMAP2+: clocks: Pass static parent pointers to common clock core
- From: Rajendra Nayak <rnayak@xxxxxx>
- Re: [PATCH] i2c: sirf: get the i2c pin group by pinctrl api
- From: Barry Song <21cnbao@xxxxxxxxx>
- [PATCH v2 4/4] ARM: mxs: remove unneeded enet_out clk initialization
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- [PATCH v2 1/4] net: fec: handle optional clk_ptp more gracefully
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- [PATCH v2 2/4] net: freescale: fec: add support for optional enet_out clk
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- [PATCH v2 0/4] ARM: mxs: sanitize enet_out clock handling
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- [PATCH V4 6/9] ARM: dts: tegra: whistler: add wakeup source for KBC
- From: Joseph Lo <josephl@xxxxxxxxxx>
- [PATCH v2 3/4] ARM: dts: mxs: add enet_out clock to devicetree
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- [PATCH V4 9/9] ARM: dts: tegra: add the PM configurations of PMC
- From: Joseph Lo <josephl@xxxxxxxxxx>
- [PATCH] dmaengine:sirf:take clock and enable it while probing
- From: Barry Song <Barry.Song@xxxxxxx>
- [PATCH V4 7/9] ARM: dts: tegra: add non-removable and keep-power-in-suspend property for MMC
- From: Joseph Lo <josephl@xxxxxxxxxx>
- [PATCH V4 8/9] ARM: tegra: config: defconfig update
- From: Joseph Lo <josephl@xxxxxxxxxx>
- Re: [PATCH v5 1/2] ARM: davinci: dm355: add support for v4l2 video display
- From: Sekhar Nori <nsekhar@xxxxxx>
- [PATCH V4 5/9] ARM: dts: tegra: add power gpio keys to DT
- From: Joseph Lo <josephl@xxxxxxxxxx>
- [PATCH V4 4/9] ARM: tegra: pm: add platform suspend support
- From: Joseph Lo <josephl@xxxxxxxxxx>
- [PATCH V4 3/9] ARM: dt: tegra: add bindings of power management configurations for PMC
- From: Joseph Lo <josephl@xxxxxxxxxx>
- [PATCH V4 2/9] ARM: tegra: irq: add wake up handling
- From: Joseph Lo <josephl@xxxxxxxxxx>
- [PATCH V4 1/9] gpio: tegra: add gpio wakeup source handling
- From: Joseph Lo <josephl@xxxxxxxxxx>
- [PATCH V4 0/9] ARM: tegra: add platform suspend support
- From: Joseph Lo <josephl@xxxxxxxxxx>
- [PATCH V2 3/3] ARM: tegra: moving the CPU power timer function to PMC driver
- From: Joseph Lo <josephl@xxxxxxxxxx>
- [PATCH V2 2/3] ARM: tegra: get PMC clock source from DT
- From: Joseph Lo <josephl@xxxxxxxxxx>
- [PATCH V2 0/3] ARM: tegra: add clock source for PMC
- From: Joseph Lo <josephl@xxxxxxxxxx>
- [PATCH V2 1/3] ARM: dts: tegra: add clock source for PMC
- From: Joseph Lo <josephl@xxxxxxxxxx>
- Re: [PATCH] i2c: sirf: get the i2c pin group by pinctrl api
- From: Sourav Poddar <sourav.poddar@xxxxxx>
- Re: [PATCH 2/2] genirq: move mask_cache into struct irq_chip_type
- From: Gerlando Falauto <gerlando.falauto@xxxxxxxxxxx>
- [PATCH 5/6] arm: mmp: remove clock name from usb pdata for ttc
- From: Chao Xie <chao.xie@xxxxxxxxxxx>
- [PATCH 4/6] arm: mmp: remove clock from usb pdata for aspenite
- From: Chao Xie <chao.xie@xxxxxxxxxxx>
- [PATCH 0/6] remove the clock name from pdata
- From: Chao Xie <chao.xie@xxxxxxxxxxx>
- [PATCH 6/6] usb: mv_usb: remove clock name from pdata
- From: Chao Xie <chao.xie@xxxxxxxxxxx>
- [PATCH 3/6] usb: ehci: mv_ehci: remove unused clock
- From: Chao Xie <chao.xie@xxxxxxxxxxx>
- [PATCH 1/6] usb: gadget: mv_udc_core: remove unused clock
- From: Chao Xie <chao.xie@xxxxxxxxxxx>
- [PATCH 2/6] usb: otg: mv_otg: remove unused clock
- From: Chao Xie <chao.xie@xxxxxxxxxxx>
- [PATCH] spi: sirf: fix the issue while transferring more than 256 words
- From: Barry Song <Barry.Song@xxxxxxx>
- [PATCH] i2c: sirf: get the i2c pin group by pinctrl api
- From: Barry Song <Barry.Song@xxxxxxx>
- Re: [PATCH 6/6] mtd: remove h720x flash support
- From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
- [PATCH 2/2] ARM/dts: prima2: add .dtsi for atlas6 and .dts for atla6-evb board
- From: Barry Song <Barry.Song@xxxxxxx>
- [PATCH 1/2] arm: prima2: add new SiRFatlas6 machine in common board
- From: Barry Song <Barry.Song@xxxxxxx>
- [PATCH 0/2] arm: prima2: add support for CSR SiRFatlas6 SoC
- From: Barry Song <Barry.Song@xxxxxxx>
- Re: [PATCH 14/14] usb: udc-core: add judgement logic for usb_gadget_connect
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- Re: [PATCH] ARM: hw_breakpoint: Enable debug powerdown only if system supports 'has_ossr'
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- Re: [RFC 0/3] arm: mxs: sanitize enet_out clock handling
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- Re: [PATCH] ARM: tegra114: add speedo-based process identification
- From: Danny Huang <dahuang@xxxxxxxxxx>
- Re: [PATCH V6] ARM: LPAE: Fix mapping in alloc_init_section for unaligned addresses
- From: Sricharan R <r.sricharan@xxxxxx>
- linux-next: manual merge of the tegra tree with the arm-soc tree
- From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
- Re: [PATCH v6 2/4] ARM: pxa168: Add SDHCI support
- From: Tanmay Upadhyay <tanmay.upadhyay@xxxxxxxxxxxxxx>
- linux-next: manual merge of the bcm2835 tree with the arm-soc tree
- From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
- linux-next: manual merge of the bcm2835 tree with the arm-soc tree
- From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
- linux-next: manual merge of the arm-soc tree with Linus' tree
- From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2 2/8] drivers: ata: use module_platform_driver_probe()
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: [PATCH v2 6/8] drivers: mfd: use module_platform_driver_probe()
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: Linux 3.8.3
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH -next] pinctrl: sirf: using for_each_set_bit to simplify the code
- From: Barry Song <21cnbao@xxxxxxxxx>
- Re: mmap sync issue
- From: Hugh Dickins <hughd@xxxxxxxxxx>
- Re: [Suggestion] Latest randconfig build errors for CONFIG_MMU=no
- From: Chen Gang <gang.chen@xxxxxxxxxxx>
- Re: [PATCH v6 2/4] ARM: pxa168: Add SDHCI support
- From: Haojian Zhuang <haojian.zhuang@xxxxxxxxx>
- Re: [PATCH v2 4/4] ARM: pxa168/gplugd: Add support for SD port 1
- From: Haojian Zhuang <haojian.zhuang@xxxxxxxxx>
- Re: [GIT PULL 3/3] ARM: mvebu: soc for v3.10
- From: Jason Cooper <jason@xxxxxxxxxxxxxx>
- Re: [PATCH 3.9-rc1] clk: vt8500: Fix variable name '*prate' compile error
- From: Mike Turquette <mturquette@xxxxxxxxxx>
- Re: [PATCH v3 5/6] irqchip: s3c24xx: add devicetree support
- From: Heiko Stübner <heiko@xxxxxxxxx>
- Re: [GIT PULL 3/3] ARM: mvebu: soc for v3.10
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2, part3 02/12] mm/ARM64: kill poison_init_mem()
- From: Will Deacon <will.deacon@xxxxxxx>
- Re: [PATCH] ARM: kirkwood: Add support for NETGEAR ReadyNAS Duo v2 using DT
- From: arno@xxxxxxxxxxxx (Arnaud Ebalard)
- Re: [PATCH 3.9-rc1] clk: vt8500: Fix variable name '*prate' compile error
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [RFC PATCH 5/8] s5p-fimc: Add ISP video capture driver stubs
- From: Sylwester Nawrocki <sylvester.nawrocki@xxxxxxxxx>
- Re: [PATCH 3.9-rc1] clk: vt8500: Fix variable name '*prate' compile error
- From: Mike Turquette <mturquette@xxxxxxxxxx>
- Re: [PATCH] ARM: kirkwood: Add support for NETGEAR ReadyNAS Duo v2 using DT
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH] ARM: kirkwood: Add support for NETGEAR ReadyNAS Duo v2 using DT
- From: Jason Cooper <jason@xxxxxxxxxxxxxx>
- [PATCH] ARM: kirkwood: Add support for NETGEAR ReadyNAS Duo v2 using DT
- From: arno@xxxxxxxxxxxx (Arnaud Ebalard)
- [GIT PULL 3/3] ARM: mvebu: soc for v3.10
- From: Jason Cooper <jason@xxxxxxxxxxxxxx>
- [GIT PULL 1/3] ARM: mvebu: cleanup for v3.10
- From: Jason Cooper <jason@xxxxxxxxxxxxxx>
- [GIT PULL 0/3] ARM: mvebu: changes for v3.10
- From: Jason Cooper <jason@xxxxxxxxxxxxxx>
- [GIT PULL 2/3] ARM: mvebu: drivers for v3.10
- From: Jason Cooper <jason@xxxxxxxxxxxxxx>
- Re: Linux 3.8.3
- From: Bjørn Mork <bjorn@xxxxxxx>
- Re: [PATCH 1/4] mtd: merge mtdchar module with mtdcore
- From: Shmulik Ladkani <shmulik.ladkani@xxxxxxxxx>
- Re: Linux 3.8.3
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH V6] ARM: LPAE: Fix mapping in alloc_init_section for unaligned addresses
- From: Christoffer Dall <chris@xxxxxxxxxxxx>
- Re: [RFC PATCH 1/8] s5p-fimc: Add Exynos4x12 FIMC-IS driver
- From: Sylwester Nawrocki <sylvester.nawrocki@xxxxxxxxx>
- Re: Linux 3.8.3
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH v2 for 3.10] Introduce a Marvell EBU MBus driver
- From: Jason Cooper <jason@xxxxxxxxxxxxxx>
- Re: [PATCHv1 2/2] ARM: socfpga: Add clock entries into device tree
- From: Pavel Machek <pavel@xxxxxxx>
- [PATCH v2 4/4] ARM: pxa168/gplugd: Add support for SD port 1
- From: Tanmay Upadhyay <tanmay.upadhyay@xxxxxxxxxxxxxx>
- [PATCH v2 3/4] mmc: sdhci-pxa: Add SDHCI driver for PXA16x
- From: Tanmay Upadhyay <tanmay.upadhyay@xxxxxxxxxxxxxx>
- [PATCH v6 2/4] ARM: pxa168: Add SDHCI support
- From: Tanmay Upadhyay <tanmay.upadhyay@xxxxxxxxxxxxxx>
- [PATCH 1/4] mmc: sdhci-pxa: Trivial fix in Kconfig
- From: Tanmay Upadhyay <tanmay.upadhyay@xxxxxxxxxxxxxx>
- Re: [PATCHv1 1/2] ARM: socfpga: Enable hotplug and soft reset
- From: Pavel Machek <pavel@xxxxxxx>
- [PATCH 0/4] Add SD support for PXA168 & gplugD
- From: Tanmay Upadhyay <tanmay.upadhyay@xxxxxxxxxxxxxx>
- Re: [PATCHv1 0/2] ARM: socfpga: Soft reset, hotplug and device tree clocks
- From: Pavel Machek <pavel@xxxxxxx>
- Re: [PATCH] USB: EHCI: fix for leaking isochronous data
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] USB: EHCI: fix for leaking isochronous data
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] USB: EHCI: fix for leaking isochronous data
- From: Soeren Moch <smoch@xxxxxx>
- Re: [PATCH] isdn: hisax: netjet requires VIRT_TO_BUS
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [PATCH] ethernet/tulip: DE4x5 needs VIRT_TO_BUS
- From: David Miller <davem@xxxxxxxxxxxxx>
- [PATCH v3 7/7] ARM: mach-shmobile: r8a7740: Setup the timer CMT10 using DT
- From: Bastian Hecht <hechtb@xxxxxxxxx>
- [PATCH v3 6/7] ARM: shmobile: r8a7740: Add DT name to clock list for CMT10
- From: Bastian Hecht <hechtb@xxxxxxxxx>
- [PATCH v3 2/7] clocksource: sh_cmt: Add OF support
- From: Bastian Hecht <hechtb@xxxxxxxxx>
- [PATCH v3 5/7] ARM: mach-shmobile: sh73a0: Setup the timer CMT10 using DT
- From: Bastian Hecht <hechtb@xxxxxxxxx>
- [PATCH v3 4/7] ARM: shmobile: sh73a0: Add timer DT names to clock list
- From: Bastian Hecht <hechtb@xxxxxxxxx>
- [PATCH v3 3/7] clocksource: sh_tmu: Add OF support
- From: Bastian Hecht <hechtb@xxxxxxxxx>
- [PATCH v3 1/7] ARM: shmobile: Define DT bindings for timer devices
- From: Bastian Hecht <hechtb@xxxxxxxxx>
- Re: [PATCH] ARM: mach-moxart: platform port for MOXA ART SoC
- From: Jonas Jensen <jonas.jensen@xxxxxxxxx>
- Re: ep93xx irq-vic regression
- From: Florian Fainelli <florian@xxxxxxxxxxx>
- Re: [Suggestion] Latest randconfig build errors for CONFIG_MMU=no
- From: Will Deacon <will.deacon@xxxxxxx>
- Re: [PATCH 2/3] ARM: Detect support for SDIV/UDIV from ISAR0 register
- From: Will Deacon <will.deacon@xxxxxxx>
- Re: [PATCH 3/3] ARM: Work around faulty ISAR0 register in some Krait CPUs
- From: Will Deacon <will.deacon@xxxxxxx>
- Re: [PATCH 1/3] ARM: Clear IDIVT hwcap if CONFIG_ARM_THUMB=n
- From: Will Deacon <will.deacon@xxxxxxx>
- [PATCH v3 6/6] irqchip: s3c24xx: add s3c2450 interrupt definitions
- From: Heiko Stübner <heiko@xxxxxxxxx>
- [PATCH v3 5/6] irqchip: s3c24xx: add devicetree support
- From: Heiko Stübner <heiko@xxxxxxxxx>
- [PATCH v3 4/6] irqchip: s3c24xx: use irq_create_mapping for parent irqs
- From: Heiko Stübner <heiko@xxxxxxxxx>
- [PATCH v3 3/6] irqchip: s3c24xx: fix irqlist of second s3c2416 controller
- From: Heiko Stübner <heiko@xxxxxxxxx>
- [PATCH v3 2/6] irqchip: s3c24xx: fix comments on some camera interrupts
- From: Heiko Stübner <heiko@xxxxxxxxx>
- [PATCH v3 1/6] ARM: S3C24XX: move irq driver to drivers/irqchip
- From: Heiko Stübner <heiko@xxxxxxxxx>
- [PATCH v3 0/6] move s3c24xx-irq to drivers/irqchip and add dt support
- From: Heiko Stübner <heiko@xxxxxxxxx>
- Re: [PATCH V2 0/8] ARM: dts: Various OMAP2+ device-tree updates
- From: Anil Kumar <anilk4.v@xxxxxxxxx>
- Re: [PATCH V3 00/18] ARM: OMAP2+: GPMC clean-up and DT update
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH V3 10/18] ARM: OMAP2+: Add function to read GPMC settings from device-tree
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH V4] ARM: dts: add minimal DT support for DevKit8000.
- From: Anil Kumar <anilk4.v@xxxxxxxxx>
- [PATCH V6] ARM: LPAE: Fix mapping in alloc_init_section for unaligned addresses
- From: Sricharan R <r.sricharan@xxxxxx>
- Re: [PATCH V6] ARM: LPAE: Fix mapping in alloc_init_section for unaligned addresses
- From: Sricharan R <r.sricharan@xxxxxx>
- Re: [Suggestion] Latest randconfig build errors for Head.S
- From: Chen Gang F T <chen.gang.flying.transformer@xxxxxxxxx>
- Re: Anyone implement Cortex A9 FIQ
- From: Frank Li <lznuaa@xxxxxxxxx>
- Re: ep93xx irq-vic regression
- From: Ryan Mallon <rmallon@xxxxxxxxx>
- Re: [PATCH] ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0
- From: Fabio Estevam <festevam@xxxxxxxxx>
- [PATCH] ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0
- From: Marek Vasut <marex@xxxxxxx>
- Re: Kirkwood NSA 310 does not boot with 3.8.3
- From: Jason Cooper <jason@xxxxxxxxxxxxxx>
- Kirkwood NSA 310 does not boot with 3.8.3
- From: Lukas Zapletal <lukas-x@xxxxxxxxxxxxxxx>
- Re: Shifted framebuffer after X11 starts on mx28
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH V3 02/18] ARM: OMAP2+: Add variable to store number of GPMC waitpins
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
- Re: Shifted framebuffer after X11 starts on mx28
- From: Marek Vasut <marex@xxxxxxx>
- Shifted framebuffer after X11 starts on mx28
- From: Fabio Estevam <festevam@xxxxxxxxx>
- Re: [PATCHv2] ARM: Push selects for TWD/SCU into machine entries
- From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
- Re: [PATCH] USB: EHCI: fix for leaking isochronous data
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH v2, part3 02/12] mm/ARM64: kill poison_init_mem()
- From: Jiang Liu <liuj97@xxxxxxxxx>
- Re: [PATCH 0/5] cns3xxx multiplatform support
- From: Anton Vorontsov <anton@xxxxxxxxxx>
- [PATCH] ARM: imx: apf51dev: add ecspi1, ecspi2 and i2c2 support
- From: Gwenhael Goavec-Merou <gwenhael.goavec-merou@xxxxxxxxxxxx>
- [PATCH] ARM: imx1: mm: add call to mxc_device_init
- From: Gwenhael Goavec-Merou <gwenhael.goavec-merou@xxxxxxxxxxxx>
- Re: [PATCH v2] clk: add si5351 i2c common clock driver
- From: Daniel Mack <zonque@xxxxxxxxx>
- Re: [PATCH] clk: add DT test clock consumer driver
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH 1/5] net: Add davicom wemac ethernet driver found on Allwinner A10 SoC's
- From: Alexander Shiyan <shc_work@xxxxxxx>
- Re: [PATCH 1/5] net: Add davicom wemac ethernet driver found on Allwinner A10 SoC's
- From: Florian Fainelli <florian@xxxxxxxxxxx>
- Re: ep93xx irq-vic regression
- From: Florian Fainelli <florian@xxxxxxxxxxx>
- [PATCH v2] clk: add si5351 i2c common clock driver
- From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
- [PATCH] clk: add DT test clock consumer driver
- From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
- [PATCH] clk: let mxs specific clk-div clock type be a generic clock type
- From: Thomas Abraham <thomas.abraham@xxxxxxxxxx>
- [PATCH v3] pinctrl: mvebu: prevent walking off the end of group array
- From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
- Re: Getting kernel uImage build issue on omap2+
- From: Anil Kumar <anilk4.v@xxxxxxxxx>
- [PATCH v5 2/2] ARM: davinci: dm355 EVM: add support for VPBE display
- From: Prabhakar lad <prabhakar.csengg@xxxxxxxxx>
- [PATCH v5 1/2] ARM: davinci: dm355: add support for v4l2 video display
- From: Prabhakar lad <prabhakar.csengg@xxxxxxxxx>
- [PATCH v5 0/2] ARM: davinci: dm355: add support for vpbe display
- From: Prabhakar lad <prabhakar.csengg@xxxxxxxxx>
- Re: Getting kernel uImage build issue on omap2+
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
- Re: Fwd: [PATCH] Turn off -Wmaybe-uninitialized when building with -Os
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- [PATCH V2 8/8] memory: emif: Load the correct custom config values from dt
- From: Lokesh Vutla <lokeshvutla@xxxxxx>
- [PATCH V2 7/8] memory: emif: errata i743: Prohibit usage of Power-Down mode
- From: Lokesh Vutla <lokeshvutla@xxxxxx>
- [PATCH V2 6/8] memory: emif: Fix the incorrect 'size' parameter in memcpy
- From: Lokesh Vutla <lokeshvutla@xxxxxx>
- [PATCH V2 5/8] memory: emif: use restart if power_off not present when out of spec
- From: Lokesh Vutla <lokeshvutla@xxxxxx>
- [PATCH V2 4/8] memory: emif: Handle devices which are not rated for >85C
- From: Lokesh Vutla <lokeshvutla@xxxxxx>
- [PATCH V2 3/8] memory: emif: handle overflow for timing for LP mode
- From: Lokesh Vutla <lokeshvutla@xxxxxx>
- [PATCH V2 2/8] memory: emif: setup LP settings on freq update
- From: Lokesh Vutla <lokeshvutla@xxxxxx>
- [PATCH V2 1/8] memory: emif: Fix the lpmode timeout calculation
- From: Lokesh Vutla <lokeshvutla@xxxxxx>
- [PATCH V2 0/8] memory: emif: miscellaneous bug fixes for EMIF driver
- From: Lokesh Vutla <lokeshvutla@xxxxxx>
- Re: [PATCH 0/8] memory: emif: miscellaneous bug fixes for EMIF driver
- From: Lokesh Vutla <lokeshvutla@xxxxxx>
- Getting kernel uImage build issue on omap2+
- From: Anil Kumar <anilk4.v@xxxxxxxxx>
- Re: [RFC 1/1] clk: Add notifier support in clk_prepare_enable/clk_disable_unprepare
- From: Bill Huang <bilhuang@xxxxxxxxxx>
- Re: [RFC 1/1] clk: Add notifier support in clk_prepare_enable/clk_disable_unprepare
- From: Bill Huang <bilhuang@xxxxxxxxxx>
- Re: [PATCH] USB: EHCI: fix for leaking isochronous data
- From: Soeren Moch <smoch@xxxxxx>
- Re: [RFC v2 1/1] clk: Add notifier support in clk_prepare/clk_unprepare
- From: Bill Huang <bilhuang@xxxxxxxxxx>
- Re: [RFC 1/1] clk: Add notifier support in clk_prepare_enable/clk_disable_unprepare
- From: Bill Huang <bilhuang@xxxxxxxxxx>
- RE: [PATCH 0/3] arm: ep93xx driver cleanup
- From: H Hartley Sweeten <hartleys@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 06/29] arm64: KVM: fault injection into a guest
- From: Geoff Levand <geoff@xxxxxxxxxxxxx>
- [PATCH 0/3] arm: ep93xx driver cleanup
- From: H Hartley Sweeten <hartleys@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 05/29] arm64: KVM: Basic ESR_EL2 helpers and vcpu register access
- From: Geoff Levand <geoff@xxxxxxxxxxxxx>
- Re: [PATCH 1/6] serial: 8250_dw: add support for clk api
- From: Emilio López <emilio@xxxxxxxxxxxxx>
- Re: [PATCH 1/6] serial: 8250_dw: add support for clk api
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 23/29] arm64: KVM: 32bit GP register access
- From: Geoff Levand <geoff@xxxxxxxxxxxxx>
- RE: ep93xx irq-vic regression
- From: H Hartley Sweeten <hartleys@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/6] serial: 8250_dw: add support for clk api
- From: Emilio López <emilio@xxxxxxxxxxxxx>
- Re: [RFC] USB: EHCI: hot-fix OMAP and Orion multiplatform config
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 0/2] refactoring for mask_cache
- From: Simon Guinot <simon.guinot@xxxxxxxxxxxx>
- [PATCH] mm: Make snapshotting pages for stable writes a per-bio operation
- From: "Darrick J. Wong" <darrick.wong@xxxxxxxxxx>
- Re: ep93xx irq-vic regression
- From: Ryan Mallon <rmallon@xxxxxxxxx>
- Re: [PATCH 1/6] serial: 8250_dw: add support for clk api
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [GIT PULL] at91: cleanup + soc for 3.10 #1
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [GIT PULL] Device Tree fixes for v3.9
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [GIT PULL] at91: framebuffer enhancements for 3.10
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [GIT PULL][for 3.10] pull request from hi3xxx branch in pxa git tree
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [GIT PULL] ARM: mvebu: DT changes for v3.10
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [GIT PULL] clocksource cleanup for 3.10
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [GIT PULL 0/5] Samsung changes-1 for v3.10
- From: Arnd Bergmann <arnd@xxxxxxxx>
- ep93xx irq-vic regression
- From: H Hartley Sweeten <hartleys@xxxxxxxxxxxxxxxxxxx>
- Re: [GIT PULL] Nomadik multiplatform support for ARM SoC
- From: Arnd Bergmann <arnd@xxxxxxxx>