Linux ARM Kernel

Thread Index

[Prev Page][Next Page]

Re: [PATCH 1/4 v2] dmaengine: add a tx_free method to struct dma_async_tx_descriptor
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
[RFC] [PATCH] Imote2 platform support
- From: Jonathan Cameron <jic23@xxxxxxxxx>
Re: Setting of VMALLOC_END
- From: Nicolas Pitre <nico@xxxxxxx>
Re: Setting of VMALLOC_END
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: Setting of VMALLOC_END
- From: "Rex Ashbaugh" <rexa@xxxxxxxxxxxx>
Re: Setting of VMALLOC_END
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Timer running slow
- From: Manoj <manoj23@xxxxxxxxx>
RE: [PATCH 3/4 v2] i.MX31: framebuffer driver
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
RE: [PATCH 3/4 v2] i.MX31: framebuffer driver
- From: "Herring Robert" <R.Herring@xxxxxxxxxxxxx>
Re: i.MX31 State Retention mode (suspend to ram)
- From: Fabio Estevam <fabioestevam@xxxxxxxxx>
Re: Setting of VMALLOC_END
- From: "Rex Ashbaugh" <rexa@xxxxxxxxxxxx>
[PATCH 2/2] [MTD][NAND] pxa3xx: convert from ns to clock ticks more accurately
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
[PATCH 1/2] [MTD][NAND] pxa3xx: fix non-page-aligned reads
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
Re: [PATCH] ixp4xx_qmgr: support 64 queues, peek, poke, show
- From: "Miguel Ángel Álvarez" <gotzoncabanes@xxxxxxxxx>
i.MX31 State Retention mode (suspend to ram)
- From: Thomas Nemeth <thomas.nemeth@xxxxxxxxxxx>
Re: [PATCH] ixp4xx_qmgr: support 64 queues, peek, poke, show
- From: Karl Hiramoto <karl@xxxxxxxxxxxx>
Re: [PATCH 2/4 v2] i.MX31: Image Processing Unit DMA and IRQ drivers
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
Re: [PATCH 2/4 v2] i.MX31: Image Processing Unit DMA and IRQ drivers
- From: Dmitry Krivoschekov <dmitry.krivoschekov@xxxxxxxxx>
Re: [RESEND][GIT PULL] Scoop API cleanup
- From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
Re: Cache and TLB lockdown
- From: Vinayak <vinayak.pane@xxxxxxxxx>
Re: [PATCH 0/8] further separation of pxa-regs.h
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
Re: [PATCH 0/8] further separation of pxa-regs.h
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
[PATCH] ixp4xx_qmgr: support 64 queues
- From: "Miguel Ángel Álvarez" <gotzoncabanes@xxxxxxxxx>
[PATCH 4/4 v2] i.MX31: platform bindings and initialisation for IPU and framebuffer drivers
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
[PATCH 3/4 v2] i.MX31: framebuffer driver
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
[PATCH 2/4 v2] i.MX31: Image Processing Unit DMA and IRQ drivers
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
[PATCH 1/4 v2] dmaengine: add a tx_free method to struct dma_async_tx_descriptor
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
[PATCH 0/4 v2] i.MX31: dmaengine and framebuffer drivers
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
[PATCH] HDL-GXR support
- From: Kunihiko IMAI <bak@xxxxxxxxxxxxx>
Re: Setting of VMALLOC_END
- From: "Linux Engineer" <linuxengineer.developer@xxxxxxxxx>
Re: [RESEND][GIT PULL] Scoop API cleanup
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
[PATCH] make the default alignment trap behavior configurable for user space
- From: Nicolas Pitre <nico@xxxxxxx>
[PATCH] [S3C64XX] Fix wrong register GPIO offset calculation
- From: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
Re: ARM11 VFP state on resume
- From: "Kyungmin Park" <kmpark@xxxxxxxxxxxxx>
Re: ARM11 VFP state on resume
- From: Ben Dooks <ben-linux@xxxxxxxxx>
Re: ARM11 VFP state on resume
- From: "Kyungmin Park" <kmpark@xxxxxxxxxxxxx>
[RESEND][GIT PULL] Scoop API cleanup
- From: Dmitry Baryshkov <dbaryshkov@xxxxxxxxx>
[RFC PATCH] at91 gpiolib support
- From: Ryan Mallon <ryan@xxxxxxxxxxxxxxxx>
Re: netx updates targeting next merge window
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
Re: [RFC] [PATCH] Add basic gumstix verdex support
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
ARM11 VFP state on resume
- From: Ben Dooks <ben-linux@xxxxxxxxx>
Re: Setting of VMALLOC_END
- From: Nicolas Pitre <nico@xxxxxxx>
Re: Cache and TLB lockdown
- From: "Karl Olsen" <karl@xxxxxxxxxxxxxxxxx>
Setting of VMALLOC_END
- From: "Linux Developer" <linuxengineer.developer@xxxxxxxxx>
Re: [RFC] [PATCH] Add basic gumstix verdex support
- From: Andre Puschmann <andre.puschmann@xxxxxxx>
Re: Cache and TLB lockdown
- From: "Ulf Samuelsson" <ulf.samuelsson@xxxxxxxxx>
Re: [Patch 0/4] EZX machine updates for the next merge window, second try
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
Re: [RFC 2.6.27 1/1] gumstix/am200: fix incorrect init done by am200/am300
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
SD/MMC (iMX31) : howto handle the surprise removal
- From: Marc Titinger <mtittinge@xxxxxxxxxxx>
Re: Cache and TLB lockdown
- From: "Karl Olsen" <karl@xxxxxxxxxxxxxxxxx>
Re: [RFC 2.6.27 5/5] Add support for E-Ink Broadsheet controller and AM300 kit
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
Re: Cache and TLB lockdown
- From: "Ulf Samuelsson" <ulf.samuelsson@xxxxxxxxx>
Re: netx updates targeting next merge window
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH] netx: Add support for nxhmi-re and nxhmi-bb
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Cache and TLB lockdown
- From: "Karl Olsen" <karl@xxxxxxxxxxxxxxxxx>
Re: [PATCH] [MMC]: Add a MX2/MX3 specific SDHC driver
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
at91sam9260 + MCI at 50MHz
- From: "Pierre Savary" <pierre.savary@xxxxxxxxxx>
[PATCH] [S3C64XX] Initialize the generic GPIO at machine init
- From: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
Re: [RFC 2.6.27 1/1] gumstix/am200: fix incorrect init done by am200/am300
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
Re: [RFC 2.6.27 1/1] gumstix/am200: fix incorrect init done by am200/am300
- From: "Jaya Kumar" <jayakumar.lkml@xxxxxxxxx>
Re: at91 power management questions
- From: Aras Vaichas <arasv@xxxxxxxxxxxxxx>
Re: at91 power management questions
- From: Aras Vaichas <arasv@xxxxxxxxxxxxxx>
Re: at91 power management questions
- From: Ryan Mallon <ryan@xxxxxxxxxxxxxxxx>
Re: [PATCH 10/11] ARM: OMAP: Switch to gpio_request/free calls, v2
- From: Tony Lindgren <tony@xxxxxxxxxxx>
Re: at91 power management questions
- From: Aras Vaichas <arasv@xxxxxxxxxxxxxx>
ep93xx: include linux/i2c.h
- From: "hartleys" <hartleys@xxxxxxxxxxxxxxxxxxx>
at91 power management questions
- From: Ryan Mallon <ryan@xxxxxxxxxxxxxxxx>
[PATCH] netx: Add support for nxhmi-re and nxhmi-bb
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
[PATCH] netx: enable GENERIC_TIME
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
[PATCH] netx: Use a cpp symbol for the clocksource timer number
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
[PATCH] netx: define register MEMCR
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
[PATCH] netx: add support for clockevents
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
[PATCH] netx/xc: add a few "const"s to fix compiler warnings
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
[PATCH] mach-netx/time.c: codingstyle cleanup
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
netx updates targeting next merge window
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
Re: MMC on PXA320 working ???
- From: Jürgen Schindele <linux@xxxxxxxxxxxxxx>
RE: [PATCH] ep93xx: platform init cleanup
- From: "hartleys" <hartleys@xxxxxxxxxxxxxxxxxxx>
RE: Occasional Kernel Panic in getname() - 2.6.21
- From: "Biswa Nayak (Wipro/Bochum)" <ext-Biswa.Nayak@xxxxxxxxxx>
Re: Occasional Kernel Panic in getname() - 2.6.21
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
[Patch 4/4] EZX: I2C configuration
- From: Stefan Schmidt <stefan@xxxxxxxxxxxxxxxxxx>
[Patch 2/4] EZX: GPIO configuration
- From: Stefan Schmidt <stefan@xxxxxxxxxxxxxxxxxx>
[Patch 3/4] EZX: Keypad configuration
- From: Stefan Schmidt <stefan@xxxxxxxxxxxxxxxxxx>
[Patch 0/4] EZX machine updates for the next merge window, second try
- From: Stefan Schmidt <stefan@xxxxxxxxxxxxxxxxxx>
[Patch 1/4] EZX: Remove two memory banks fixup
- From: Stefan Schmidt <stefan@xxxxxxxxxxxxxxxxxx>
Occasional Kernel Panic in getname() - 2.6.21
- From: "Biswa Nayak (Wipro/Bochum)" <ext-Biswa.Nayak@xxxxxxxxxx>
Re: [RFC, PATCH 1/3] ARM: PL08X: Add PL08x AMBA DMA Controller driver.
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [RFC 2.6.27 1/1] gumstix/am200: fix incorrect init done by am200/am300
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
Re: [Patch 0/4] EZX machine updates for the next merge window
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
Re: [PATCH] [MMC]: Add a MX2/MX3 specific SDHC driver
- From: Fabio Estevam <fabioestevam@xxxxxxxxx>
Re: [PATCH] [MMC]: Add a MX2/MX3 specific SDHC driver
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [PATCH] [MMC]: Add a MX2/MX3 specific SDHC driver
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH] ep93xx: platform init cleanup
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [2/4] KS8695 updates: Fixup platform devices
- From: Daniel Silverstone <dsilvers@xxxxxxxxxxxx>
[PATCH] [S3C64XX] Add OneNAND devices
- From: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
[Patch 4/4] EZX: I2C configuration
- From: Stefan Schmidt <stefan@xxxxxxxxxxxxxxxxxx>
[Patch 2/4] EZX: GPIO configuration
- From: Stefan Schmidt <stefan@xxxxxxxxxxxxxxxxxx>
[Patch 3/4] EZX: Keypad configuration
- From: Stefan Schmidt <stefan@xxxxxxxxxxxxxxxxxx>
[Patch 0/4] EZX machine updates for the next merge window
- From: Stefan Schmidt <stefan@xxxxxxxxxxxxxxxxxx>
[Patch 1/4] EZX: Remove two memory banks fixup
- From: Stefan Schmidt <stefan@xxxxxxxxxxxxxxxxxx>
[PATCH 2/2] pxa: convert legacy LCD setup of other boards to new one
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
[PATCH 1/2] pxafb: add color TFT 8BPP LCD panel type
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
[PATCH] [S3C64XX] Use System revision to detect CPU ID
- From: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
Re: [PATCH 5/6] ARM: OMAP3: Add basic support for Pandora handheld console, v2
- From: Tony Lindgren <tony@xxxxxxxxxxx>
[PATCH 0/5] Omap MMC init updates and new controller for 2.6.29 merge window
- From: Tony Lindgren <tony@xxxxxxxxxxx>
[PATCH 3/5] omap mmc: Add low-level initialization for hsmmc controller
- From: Tony Lindgren <tony@xxxxxxxxxxx>
[PATCH 5/5] omap mmc: Add new omap hsmmc controller for 2430 and 34xx
- From: Tony Lindgren <tony@xxxxxxxxxxx>
[PATCH 4/5] omap mmc: force MMC module reset on boot
- From: Tony Lindgren <tony@xxxxxxxxxxx>
[PATCH 2/5] omap mmc: Add better MMC low-level init
- From: Tony Lindgren <tony@xxxxxxxxxxx>
[PATCH 1/5] omap mmc: Remove broken MMC init code
- From: Tony Lindgren <tony@xxxxxxxxxxx>
Re: [PATCH 5/6] ARM: OMAP2: drop redundant pending write check for gptimer
- From: Tony Lindgren <tony@xxxxxxxxxxx>
Re: [PATCH 5/6] ARM: OMAP2: drop redundant pending write check for gptimer
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
RE: [PATCH 5/6] ARM: OMAP2: drop redundant pending write check for gptimer
- From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
Re: [PATCH 5/6] ARM: OMAP3: Add basic support for Pandora handheld console
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [PATCH 5/6] ARM: OMAP2: drop redundant pending write check for gptimer
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [PATCH 0/2] Omap1 updates for 2.6.29 merge window
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
[PATCH 5/6] ARM: OMAP3: Add basic support for Pandora handheld console
- From: Tony Lindgren <tony@xxxxxxxxxxx>
[PATCH 6/6] ARM: OMAP3: Pin multiplexing updates for 24xx and 34xx
- From: Tony Lindgren <tony@xxxxxxxxxxx>
[PATCH 4/6] ARM: OMAP3: DMA: Fix for sDMA Errata 1.113
- From: Tony Lindgren <tony@xxxxxxxxxxx>
[PATCH 2/6] ARM: OMAP3: Add OMAP34xx pin multiplexing into I2C bus registration helper
- From: Tony Lindgren <tony@xxxxxxxxxxx>
[PATCH 3/6] ARM: OMAP3: LDP: Add Ethernet device support to make ldp boot succeess
- From: Tony Lindgren <tony@xxxxxxxxxxx>
[PATCH 1/6] ARM: OMAP3: Warn about spurious interrupts
- From: Tony Lindgren <tony@xxxxxxxxxxx>
IXP4xx and > 64 MB RAM
- From: Krzysztof Halasa <khc@xxxxxxxxx>
Re: [2/4] KS8695 updates: Fixup platform devices
- From: Ben Dooks <ben-linux@xxxxxxxxx>
[RFC 2.6.27 1/1] gumstix/am200: fix incorrect init done by am200/am300
- From: Jaya Kumar <jayakumar.lkml@xxxxxxxxx>
Re: [RFC] [PATCH] Add basic gumstix verdex support
- From: "Jaya Kumar" <jayakumar.lkml@xxxxxxxxx>
Re: [2/4] KS8695 updates: Fixup platform devices
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [2/4] KS8695 updates: Fixup platform devices
- From: Daniel Silverstone <dsilvers@xxxxxxxxxxxx>
Re: [0/4] KS8695 updates and DSM-320 board support
- From: Daniel Silverstone <dsilvers@xxxxxxxxxxxx>
Re: [PATCH] don't let silent unaligned accesses go through in user space with EABI
- From: Nicolas Pitre <nico@xxxxxxx>
Re: [PATCH] don't let silent unaligned accesses go through in user space with EABI
- From: Måns Rullgård <mans@xxxxxxxxx>
Re: [PATCH] don't let silent unaligned accesses go through in user space with EABI
- From: Mikael Pettersson <mikpe@xxxxxxxx>
Re: [PATCH] don't let silent unaligned accesses go through in user space with EABI
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [0/4] KS8695 updates and DSM-320 board support
- From: "Andrew Victor" <avictor.za@xxxxxxxxx>
[PATCH] don't let silent unaligned accesses go through in user space with EABI
- From: Nicolas Pitre <nico@xxxxxxx>
Re: [2/4] KS8695 updates: Fixup platform devices
- From: "Andrew Victor" <avictor.za@xxxxxxxxx>
Re: [1/4] KS8695 updates: Fix warning in memory.h
- From: "Andrew Victor" <avictor.za@xxxxxxxxx>
[PATCH 0/6] Omap3 updates for 2.6.29 merge window
- From: Tony Lindgren <tony@xxxxxxxxxxx>
Re: Need to allocate more dma memory
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [3/4] DSM-320 core board support
- From: Daniel Silverstone <dsilvers@xxxxxxxxxxxx>
Re: [4/4] DSM-320 defconfig updates
- From: Daniel Silverstone <dsilvers@xxxxxxxxxxxx>
Need to allocate more dma memory
- From: Ananthapadmanaban <gapadmanaban@xxxxxxxxxxxxxxxx>
Re: [2/4] KS8695 updates: Fixup platform devices
- From: Daniel Silverstone <dsilvers@xxxxxxxxxxxx>
Re: [1/4] KS8695 updates: Fix warning in memory.h
- From: Daniel Silverstone <dsilvers@xxxxxxxxxxxx>
[0/4] KS8695 updates and DSM-320 board support
- From: Daniel Silverstone <dsilvers@xxxxxxxxxxxx>
Re: FCSE again.
- From: Richard Cochran <richard.cochran@xxxxxxxxxx>
machine ID for I-O DATA HDL-GX and HDL-GXR
- From: Kunihiko IMAI <bak@xxxxxxxxxxxxx>
Re: [Q] request GPIOs for non-GPIO pin function?
- From: Valentin Longchamp <valentin.longchamp@xxxxxxx>
Re: [Q] request GPIOs for non-GPIO pin function?
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
Re: [Q] request GPIOs for non-GPIO pin function?
- From: Valentin Longchamp <valentin.longchamp@xxxxxxx>
Re: [Q] request GPIOs for non-GPIO pin function?
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [Q] request GPIOs for non-GPIO pin function?
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
Re: [Q] request GPIOs for non-GPIO pin function?
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [Q] request GPIOs for non-GPIO pin function?
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
Re: [Q] request GPIOs for non-GPIO pin function?
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [Q] request GPIOs for non-GPIO pin function?
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
Re: [Q] request GPIOs for non-GPIO pin function?
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
Re: Fwd: [PATCH 2/2] V4L/DVB: pxa-camera: use memory mapped IO access for camera (QCI) registers
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
Re: [Q] request GPIOs for non-GPIO pin function?
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
Re: [Q] request GPIOs for non-GPIO pin function?
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: Fwd: [PATCH 2/2] V4L/DVB: pxa-camera: use memory mapped IO access for camera (QCI) registers
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
Re: [Q] request GPIOs for non-GPIO pin function?
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
Re: [Q] request GPIOs for non-GPIO pin function?
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
[PATCH 6/6] ARM: OMAP2: skip unnecessary TLDR write during non-autoreload for gptimer
- From: Tony Lindgren <tony@xxxxxxxxxxx>
[PATCH 5/6] ARM: OMAP2: drop redundant pending write check for gptimer
- From: Tony Lindgren <tony@xxxxxxxxxxx>
[PATCH 4/6] ARM: OMAP2: bard-h4: list those eeproms
- From: Tony Lindgren <tony@xxxxxxxxxxx>
[PATCH 3/6] ARM: OMAP2: Use omap_rev() instead of system_rev
- From: Tony Lindgren <tony@xxxxxxxxxxx>
[PATCH 2/6] ARM: OMAP2: Fix cpu detection
- From: Tony Lindgren <tony@xxxxxxxxxxx>
[PATCH 1/6] ARM: OMAP2: Prepare cpu detection for further improvements
- From: Tony Lindgren <tony@xxxxxxxxxxx>
[PATCH 2/2] ARM: OMAP1: osk5912: LED trigger update for CF
- From: Tony Lindgren <tony@xxxxxxxxxxx>
[PATCH 1/2] ARM: OMAP1: osk5912: Mistral eeprom support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
Re: [Q] request GPIOs for non-GPIO pin function?
- From: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx>
[PATCH 6/7] [ARM] Feroceon: pass proper -mtune argument to gcc
- From: Nicolas Pitre <nico@xxxxxxx>
[PATCH 7/7] [ARM] Kirkwood: update defconfig
- From: Nicolas Pitre <nico@xxxxxxx>
[PATCH 5/7] [ARM] Kirkwood: properly handle the WAN port on newer RD88F6281 boards
- From: Nicolas Pitre <nico@xxxxxxx>
[PATCH 4/7] [ARM] Kirkwood: allow instantiating the second ethernet port
- From: Nicolas Pitre <nico@xxxxxxx>
[PATCH 3/7] [ARM] DNS323: Initialise 88F5182 correctly
- From: Nicolas Pitre <nico@xxxxxxx>
[PATCH 2/7] [ARM] DNS323: Read MAC address from flash
- From: Nicolas Pitre <nico@xxxxxxx>
[PATCH 1/7] [ARM] Orion: add the option to support different ehci phy initialization
- From: Nicolas Pitre <nico@xxxxxxx>
[PATCH 0/7] Orion/Kirkwood updates for upcoming merge window
- From: Nicolas Pitre <nico@xxxxxxx>
[PATCH 0/6] Omap2 updates for 2.6.29 merge window
- From: Tony Lindgren <tony@xxxxxxxxxxx>
[PATCH 0/2] Omap1 updates for 2.6.29 merge window
- From: Tony Lindgren <tony@xxxxxxxxxxx>
Re: [Q] request GPIOs for non-GPIO pin function?
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
Re: [Q] request GPIOs for non-GPIO pin function?
- From: "Alan Carvalho de Assis" <acassis@xxxxxxxxx>
Re: [Q] request GPIOs for non-GPIO pin function?
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
RE: [PATCH] ep93xx: platform init cleanup
- From: "hartleys" <hartleys@xxxxxxxxxxxxxxxxxxx>
Re: [PATCH] USB device support for IMX
- From: Greg KH <greg@xxxxxxxxx>
Re: [PATCH] dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
[BUG] atmel_spi: big transfers data issue
- From: Marc Pignat <marc.pignat@xxxxxxx>
Re: [PATCH] tosa_lcd: support mode switching
- From: Richard Purdie <rpurdie@xxxxxxxxx>
Re: [Q] request GPIOs for non-GPIO pin function?
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
Re: [Q] request GPIOs for non-GPIO pin function?
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
Re: [PATCH][resend] iMX/MXC support for I2C
- From: Mark Brown <broonie@xxxxxxxxxxxxx>
Re: [RFC, PATCH v2 2/3] ARM: PL08X: Implement AMBA DMA API for AACI playback.
- From: Baruch Siach <baruch@xxxxxxxxxx>
[Q] request GPIOs for non-GPIO pin function?
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
Re: [PATCH][resend] iMX/MXC support for I2C
- From: Darius <augulis.darius@xxxxxxxxx>
Re: [RFC] [PATCH] Add basic gumstix verdex support
- From: Andre Puschmann <andre.puschmann@xxxxxxx>
Re: Build failure in arch/arm/boot/compressed when linking vmlinux
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Build failure in arch/arm/boot/compressed when linking vmlinux
- From: "Uros Bizjak" <ubizjak@xxxxxxxxx>
Re: atmel_spi and dataflash problems on at91rm9200
- From: "Andrew Victor" <avictor.za@xxxxxxxxx>
Re: Is there multiple AT91 arch support for a single kernel image?
- From: "Andrew Victor" <avictor.za@xxxxxxxxx>
[PATCH] tosa_lcd: support mode switching
- From: Dmitry Baryshkov <dbaryshkov@xxxxxxxxx>
Re: [RFC] [PATCH] Add basic gumstix verdex support
- From: "Jaya Kumar" <jayakumar.lkml@xxxxxxxxx>
Re: [RFC] [PATCH] Add basic gumstix verdex support
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
Re: Is there multiple AT91 arch support for a single kernel image?
- From: "Ulf Samuelsson" <ulf.samuelsson@xxxxxxxxx>
RE: Exception stack on ARM 922T
- From: "Vivek Kumar Gupta" <gkvivek@xxxxxxxxx>
Re: [RFC] [PATCH] Add basic gumstix verdex support
- From: "Jaya Kumar" <jayakumar.lkml@xxxxxxxxx>
Re: [RFC] [PATCH] Add basic gumstix verdex support
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
Is there multiple AT91 arch support for a single kernel image?
- From: Aras Vaichas <arasv@xxxxxxxxxxxxxx>
Re: [PATCH][resend] iMX/MXC support for I2C
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
Re: [RFC] [PATCH] Add basic gumstix verdex support
- From: "Jaya Kumar" <jayakumar.lkml@xxxxxxxxx>
Re: [PATCH][resend] iMX/MXC support for I2C
- From: Ben Dooks <ben-linux@xxxxxxxxx>
Re: [PATCH][resend] iMX/MXC support for I2C
- From: Ben Dooks <ben-linux@xxxxxxxxx>
Re: [PATCH][resend] iMX/MXC support for I2C
- From: Ben Dooks <ben-linux@xxxxxxxxx>
Re: I hope get your help with lcd driver with spi
- From: "Jaya Kumar" <jayakumar.lkml@xxxxxxxxx>
Re: [RFC, PATCH v2 2/3] ARM: PL08X: Implement AMBA DMA API for AACI playback.
- From: "Linus Walleij" <linus.ml.walleij@xxxxxxxxx>
Re: I hope get your help with lcd driver with spi
- From: "Ulf Samuelsson" <ulf.samuelsson@xxxxxxxxx>
Re: I hope get your help with lcd driver with spi
- From: David Anders <dave123_aml@xxxxxxxxx>
Re: atmel_spi and dataflash problems on at91rm9200
- From: Andre Puschmann <andre.puschmann@xxxxxxxxxxxxxxxxxx>
Re: I hope get your help with lcd driver with spi
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
Re: [PATCH][resend] iMX/MXC support for I2C
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
[PATCH, RESENT] Fix configure warnings in defconfigs for netX and Picotux 200
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
[PATCH, RESENT] patch warn_if_irqs_are_enabled_in_set_next_event
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
[PATCH, RESENT] remove a superfluous kconfig type definition
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
[PATCH] small doc fix: ftrace_dyn_arch_init is called by ftrace_init
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
Re: [PATCH][resend] iMX/MXC support for I2C
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
Re: [PATCH] basic support for Colibri PXA300 module
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: arm_clks patch status
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
uClibc pthread_mutex_lock seems broken on 2.6.28-rc6 for iop13xx
- From: David Fiddes <d.fiddes@xxxxxxxxxxxxxxxx>
Re: [PATCH 0/8] further separation of pxa-regs.h
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
arm_clks patch status
- From: "hartleys" <hartleys@xxxxxxxxxxxxxxxxxxx>
Re: [PATCH][resend] iMX/MXC support for I2C
- From: Mark Brown <broonie@xxxxxxxxxxxxx>
Re: [RFC] [PATCH] Add basic gumstix verdex support
- From: Andre Puschmann <andre.puschmann@xxxxxxx>
Re: [PATCH] pxa/em-x270: updates for 2.6.29
- From: Mark Brown <broonie@xxxxxxxxxxxxx>
Re: [PATCH] pxa/em-x270: updates for 2.6.29
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
Re: [PATCH][resend] iMX/MXC support for I2C
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
Re: [PATCH] pxa/em-x270: updates for 2.6.29
- From: Mark Brown <broonie@xxxxxxxxxxxxx>
Re: [RFC, PATCH v2 0/4] ARM: PL08X: Add DMA Controller support for PL08x series.
- From: Erik Mouw <mouw@xxxxxxxxxxxx>
Re: mmu, page size and fiq doubts
- From: Andreas Schweigstill <andreas@xxxxxxxxxxxxxxx>
Support for i.MX31 ?
- From: "Midhun A" <midhunagni@xxxxxxxxx>
kmalloc is failing and kernel is hanging
- From: "abc xyz" <abc50xyz@xxxxxxxxx>
Re: [PATCH][resend] iMX/MXC support for I2C
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
Re: Kernel oops in am200_init()
- From: "Jaya Kumar" <jayakumar.lkml@xxxxxxxxx>
Re: [RFC] [PATCH] Add basic gumstix verdex support
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
mmu, page size and fiq doubts
- From: Victor Librado <vlibrado@xxxxxxxxxxxxxxxx>
Re: [RFC] [PATCH] Add basic gumstix verdex support
- From: Andre Puschmann <andre.puschmann@xxxxxxx>
Re: I hope get your help with lcd driver with spi
- From: Sam Ravnborg <sam@xxxxxxxxxxxx>
Re: I hope get your help with lcd driver with spi
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
Re: Kernel oops in am200_init()
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
Re: [PATCH 1/2] pxa/em-x270: updates for 2.6.29 (was: Re: [PATCH] pxa/em-x270: updates for 2.6.29)
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
Re: [PATCH 2/2] pxa: update xm_x2xx_defconfig (was: Re: [PATCH] pxa/em-x270: updates for 2.6.29)
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
Re: Kernel oops in am200_init()
- From: "Jaya Kumar" <jayakumar.lkml@xxxxxxxxx>
[PATCH 1/2] pxa/em-x270: updates for 2.6.29 (was: Re: [PATCH] pxa/em-x270: updates for 2.6.29)
- From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
[PATCH 2/2] pxa: update xm_x2xx_defconfig (was: Re: [PATCH] pxa/em-x270: updates for 2.6.29)
- From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
[RFC, PATCH v2 0/4] ARM: PL08X: Add DMA Controller support for PL08x series.
- From: protected@xxxxxxx
[RFC, PATCH v2 3/3] ARM: PL08X: Implement the PL081 DMAC on the RealView PB11MPCore board.
- From: protected@xxxxxxx
[RFC, PATCH v2 2/3] ARM: PL08X: Implement AMBA DMA API for AACI playback.
- From: protected@xxxxxxx
I hope get your help with lcd driver with spi
- From: peter meng <mengsanshui@xxxxxxxxxxxx>
Re: [Linux-fbdev-devel] [PATCH 1/2] lcd: add support for Toppoly TDO35S series to tdo24m driver
- From: Richard Purdie <rpurdie@xxxxxxxxx>
[RFC, PATCH v2 1/3] ARM: PL08X: Add PL08x AMBA DMA Controller driver.
- From: protected@xxxxxxx
Re: [PATCH][resend] iMX/MXC support for I2C
- From: Jean Delvare <khali@xxxxxxxxxxxx>
Re: [PATCH] pxa/em-x270: updates for 2.6.29
- From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
Kernel oops in am200_init()
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
Re: [PATCH] pxa/em-x270: updates for 2.6.29
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
Re: [GIT PULL REQUEST] pxa patches in 'devel'
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
Re: [PATCH 0/8] further separation of pxa-regs.h
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
Re: [for-next] [ARM] S3C: Add new FB device definition
- From: cpuwolf <cpuwolf@xxxxxxxxx>
Re: [PATCH] [S3C64XX] Fix external interrupt handling
- From: Ben Dooks <ben-linux@xxxxxxxxx>
Re: [PATCH] basic support for Colibri PXA300 module
- From: Daniel Mack <daniel@xxxxxxxx>
[for-next] [ARM] S3C64XX: Update TCFG for new timer divider settings.
- From: Ben Dooks <ben-linux@xxxxxxxxx>
[for-next] [ARM] S3C: Add set_rate/round_rate methods for pwm-scaler clock
- From: Ben Dooks <ben-linux@xxxxxxxxx>
[for-next] [ARM] SMDK6410: Add LCD (LCD48WVGA) definitions
- From: Ben Dooks <ben-linux@xxxxxxxxx>
[for-next] [ARM] S3C64XX: Mask the pll values correctly
- From: Ben Dooks <ben-linux@xxxxxxxxx>
[for-next] [ARM] S3C64XX: Show uncompress messages
- From: Ben Dooks <ben-linux@xxxxxxxxx>
[for-next] [ARM] S3C: Update time initialisation to fix S3C64XX time problems
- From: Ben Dooks <ben-linux@xxxxxxxxx>
[for-next] [ARM] S3C64XX: Correct the EINT IRQ type configuration
- From: Ben Dooks <ben-linux@xxxxxxxxx>
[for-next] [ARM] S3C: Add UART FIFO selection during arch decompression
- From: Ben Dooks <ben-linux@xxxxxxxxx>
[for-next] [ARM] S3C64XX: Add standard S3C64XX 24BPP LCD GPIO setup
- From: Ben Dooks <ben-linux@xxxxxxxxx>
[for-next] [ARM] S3C: Fix scaler1 clock rate information
- From: Ben Dooks <ben-linux@xxxxxxxxx>
[for-next] [ARM] S3C64XX: Set GPIO pin when select IRQ_EINT type
- From: Ben Dooks <ben-linux@xxxxxxxxx>
[for-next] [ARM] S3C: Add new FB device definition
- From: Ben Dooks <ben-linux@xxxxxxxxx>
S3C64X LCD and misc fixes
- From: Ben Dooks <ben-linux@xxxxxxxxx>
Re: [GIT PULL REQUEST] pxa patches in 'devel'
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [PATCH V3]ARM:Add Nuvoton W90P910 Platform support
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [PATCH 0/8] further separation of pxa-regs.h
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
Re: [PATCH] basic support for Colibri PXA300 module
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [PATCH] pxa/em-x270: updates for 2.6.29
- From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
[GIT PULL REQUEST] pxa patches in 'devel'
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
Re: [PATCH] basic support for Colibri PXA300 module
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
Re: [PATCH] basic support for Colibri PXA300 module
- From: Daniel Mack <daniel@xxxxxxxx>
RE: ARM922t: Linux Kernel 2.6.26.3, unknown relocation: 40
- From: "Vivek Kumar Gupta" <gkvivek@xxxxxxxxx>
[PATCH V3]ARM:Add Nuvoton W90P910 Platform support
- From: "Vincent Wan" <mcuos.com@xxxxxxxxx>
Re: [PATCH] basic support for Colibri PXA300 module
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
Re: [RFC] [PATCH] Add basic gumstix verdex support
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
[patch 6/7] pcm037: add 1wire support
- From: akpm@xxxxxxxxxxxxxxxxxxxx
[patch 5/7] MX2 pcm038: add 1-wire master support
- From: akpm@xxxxxxxxxxxxxxxxxxxx
[patch 4/7] MX31: add w1 platform_device and resources
- From: akpm@xxxxxxxxxxxxxxxxxxxx
[patch 7/7] arch/arm: eliminate NULL test and memset after alloc_bootmem
- From: akpm@xxxxxxxxxxxxxxxxxxxx
[patch 2/7] arm: fix kernel-doc syntax
- From: akpm@xxxxxxxxxxxxxxxxxxxx
[patch 1/7] arm: use the new byteorder headers
- From: akpm@xxxxxxxxxxxxxxxxxxxx
[patch 3/7] MX2: Add W1 device/resources
- From: akpm@xxxxxxxxxxxxxxxxxxxx
Pull request for RealView patches
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
Re: [PATCH] fix a pile of OMAP issues
- From: Tony Lindgren <tony@xxxxxxxxxxx>
Re: [RFC] [PATCH] Add basic gumstix verdex support
- From: "pHilipp Zabel" <philipp.zabel@xxxxxxxxx>
Re: [PATCH 2/5] omap iommu: omap2 architecture specific functions
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [PATCH 08/16] RealView: Add support for the Cortex-A8 Platform Baseboard
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
Re: [PATCH 1/5] omap iommu: tlb and pagetable primitives
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [PATCH 1/5] omap iommu: tlb and pagetable primitives
- From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
Re: [PATCH 08/16] RealView: Add support for the Cortex-A8 Platform Baseboard
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [PATCH 08/16] RealView: Add support for the Cortex-A8 Platform Baseboard
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
Re: [PATCH 3/5] omap iommu: simple virtual address space management
- From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
[PATCH] fix a pile of OMAP issues
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [PATCH 08/16] RealView: Add support for the Cortex-A8 Platform Baseboard
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [PATCH 08/16] RealView: Add support for the Cortex-A8 Platform Baseboard
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
[PATCH] Fix mem_alignment doc
- From: Matthieu CASTET <matthieu.castet@xxxxxxxxxx>
Re: ARM922t: Linux Kernel 2.6.26.3, unknown relocation: 40
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
RE: ARM922t: Linux Kernel 2.6.26.3, unknown relocation: 40
- From: "Vivek Kumar Gupta" <gkvivek@xxxxxxxxx>
[PATCH] basic support for Colibri PXA300 module
- From: Daniel Mack <daniel@xxxxxxxx>
Re: [ARM] pxa: explicit #include <mach/dma.h> in various drivers
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [PATCH] add missing cmdset field in PXA3xx NAND code
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
Re: MioA701's dependency on LEDS_GPIO?
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
Re: [PATCH] include mach/i2c.h in pxa3xx.c
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
Re: [ARM] pxa: explicit #include <mach/dma.h> in various drivers
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
[PATCH] include mach/i2c.h in pxa3xx.c
- From: Daniel Mack <daniel@xxxxxxxx>
[PATCH] add missing cmdset field in PXA3xx NAND code
- From: Daniel Mack <daniel@xxxxxxxx>
Re: linux-gemini (gitorious.org)
- From: Paulius Zaleckas <paulius.zaleckas@xxxxxxxxxxxx>
Re: [ARM] pxa: explicit #include <mach/dma.h> in various drivers
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [ARM] pxa: explicit #include <mach/dma.h> in various drivers
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [PATCH] [MMC]: Add a MX2/MX3 specific SDHC driver
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 5/5] [RFC PATCH] Support for AT572D940HF-EK [RFC PATCH]
- From: "Antonio R. Costa" <costa.antonior@xxxxxxxxx>
Re: [PATCH 4/5] [RFC PATCH] Support for AT572D940HF-EK [RFC PATCH]
- From: "Antonio R. Costa" <costa.antonior@xxxxxxxxx>
Re: linux-gemini (gitorious.org)
- From: Paulius Zaleckas <paulius.zaleckas@xxxxxxxxxxxx>
Re: [PATCH 3/5] [RFC PATCH] Support for AT572D940HF-EK [RFC PATCH]
- From: "Antonio R. Costa" <costa.antonior@xxxxxxxxx>
Re: atmel_spi and dataflash problems on at91rm9200
- From: Marc Pignat <marc.pignat@xxxxxxx>
Re: [PATCH] tosa: add physmap mapping for ROM
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
[ARM] pxa: explicit #include <mach/dma.h> in various drivers
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
[PATCH] locomo: export locomo_frontlight_set()
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
Re: [PATCH] tosa: add physmap mapping for ROM
- From: Dmitry Baryshkov <dbaryshkov@xxxxxxxxx>
Re: [RFC] [PATCH] Add basic gumstix verdex support
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
Re: [RFC 2.6.27 1/1] gpiolib: add support for batch set of pins
- From: "Jaya Kumar" <jayakumar.lkml@xxxxxxxxx>
Re: atmel_spi and dataflash problems on at91rm9200
- From: "Ulf Samuelsson" <ulf.samuelsson@xxxxxxxxx>
Re: [PATCH] mmc: at91_mci: reorder timer setup and mmc_add_host() call
- From: Pierre Ossman <drzeus@xxxxxxxxx>
Re: atmel_spi and dataflash problems on at91rm9200
- From: steve birtles <arm_kernel_development@xxxxxxxxxxxxxxxx>
Re: [PATCH V2]ARM:Add Nuvoton W90P910 Platform support
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [PATCH 08/16] RealView: Add support for the Cortex-A8 Platform Baseboard
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
Re: [PATCH 08/16] RealView: Add support for the Cortex-A8 Platform Baseboard
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [PATCH 08/16] RealView: Add support for the Cortex-A8 Platform Baseboard
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
Re: Ignoring RAM - vmalloc region overlap
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Ignoring RAM - vmalloc region overlap
- From: Oliver Ford <ipaqlinux@xxxxxxxxxxxxx>
Re: The changes so far... (and what you need to check or update in your patches)
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [PATCH] [MMC]: Add a MX2/MX3 specific SDHC driver
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [PATCH 5/5] [RFC PATCH] Support for AT572D940HF-EK [RFC PATCH]
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [PATCH 4/5] [RFC PATCH] Support for AT572D940HF-EK [RFC PATCH]
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [PATCH 3/5] [RFC PATCH] Support for AT572D940HF-EK [RFC PATCH]
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [Linux-fbdev-devel] [RFC 2.6.27 1/1] gpiolib: add support for batch set of pins
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
Re: [Linux-fbdev-devel] [RFC 2.6.27 1/1] gpiolib: add support for batch set of pins
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
[RFC 2.6.27 1/1] gpiolib: add support for batch set of pins
- From: Jaya Kumar <jayakumar.lkml@xxxxxxxxx>
Re: [rtc-linux] Re: [patch 12/14] PCAP2 RTC driver
- From: Alessandro Zummo <alessandro.zummo@xxxxxxxxxxxx>
Re: [rtc-linux] Re: [patch 12/14] PCAP2 RTC driver
- From: Alessandro Zummo <alessandro.zummo@xxxxxxxxxxxx>
Re: [rtc-linux] [patch 12/14] PCAP2 RTC driver
- From: Alessandro Zummo <alessandro.zummo@xxxxxxxxxxxx>
Re: O_DIRECT patch for processors with VIPT cache for mainline kernel (specifically arm in our case)
- From: Matthew Wilcox <matthew@xxxxxx>
Re: O_DIRECT patch for processors with VIPT cache for mainline kernel (specifically arm in our case)
- From: Matthew Wilcox <matthew@xxxxxx>
Re: [PATCH 3/5] omap iommu: simple virtual address space management
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
[PATCH 04/11] ARM: OMAP: switch to standard gpio get/set calls
- From: Tony Lindgren <tony@xxxxxxxxxxx>
Re: [PATCH 1/5] omap iommu: tlb and pagetable primitives
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
[PATCH 06/11] ARM: OMAP: switch to gpio_direction_output
- From: Tony Lindgren <tony@xxxxxxxxxxx>
[PATCH 07/11] ARM: OMAP: use gpio_to_irq
- From: Tony Lindgren <tony@xxxxxxxxxxx>
[PATCH 08/11] ARM: OMAP: make legacy gpio request/free calls superfluous
- From: Tony Lindgren <tony@xxxxxxxxxxx>
Re: [PATCH 2/5] omap iommu: omap2 architecture specific functions
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
[PATCH 09/11] ARM: OMAP: minor gpio bugfixes
- From: Tony Lindgren <tony@xxxxxxxxxxx>
[PATCH 01/11] ARM: OMAP: Enable GPIO debounce clock only when debounce is enabled v3
- From: Tony Lindgren <tony@xxxxxxxxxxx>
Fwd: [PATCH 2/2] V4L/DVB: pxa-camera: use memory mapped IO access for camera (QCI) registers
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
[PATCH] ARM: OMAP: Typo fix for clock_allow_idle
- From: Tony Lindgren <tony@xxxxxxxxxxx>
[PATCH 11/11] ARM: OMAP: Switch ohci-omap to gpio_request/free calls
- From: Tony Lindgren <tony@xxxxxxxxxxx>
[PATCH 10/11] ARM: OMAP: Switch to gpio_request/free calls
- From: Tony Lindgren <tony@xxxxxxxxxxx>
[PATCH] ARM: OMAP: Fixes for suspend / resume GPIO wake-up handling
- From: Tony Lindgren <tony@xxxxxxxxxxx>
[PATCH 05/11] ARM: OMAP: switch to gpio_direction_input
- From: Tony Lindgren <tony@xxxxxxxxxxx>
[PATCH 03/11] ARM: OMAP: gpios implement new to_irq()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
[PATCH 02/11] ARM: OMAP: Extend gpio label column width in omap_gpio debugfs file
- From: Tony Lindgren <tony@xxxxxxxxxxx>
[PATCH] ARM: OMAP: Remove broken LCD driver for SX1
- From: Tony Lindgren <tony@xxxxxxxxxxx>
Re: O_DIRECT patch for processors with VIPT cache for mainline kernel (specifically arm in our case)
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
Re: O_DIRECT patch for processors with VIPT cache for mainline kernel (specifically arm in our case)
- From: "Dmitry Adamushko" <dmitry.adamushko@xxxxxxxxx>
Re: O_DIRECT patch for processors with VIPT cache for mainline kernel (specifically arm in our case)
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
Re: O_DIRECT patch for processors with VIPT cache for mainline kernel (specifically arm in our case)
- From: "Dmitry Adamushko" <dmitry.adamushko@xxxxxxxxx>
Re: [PATCH 0/8] further separation of pxa-regs.h
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
Re: [PATCH 08/16] RealView: Add support for the Cortex-A8 Platform Baseboard
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: atmel_spi and dataflash problems on at91rm9200
- From: Andre Puschmann <andre.puschmann@xxxxxxxxxxxxxxxxxx>
Re: [RFC PATCH v2 0/6] ARM stack unwinding support
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [PATCH 0/8] further separation of pxa-regs.h
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
Re: [PATCH 08/16] RealView: Add support for the Cortex-A8 Platform Baseboard
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
[PATCH 2/2] pxa: add base PXA935 support due to CPUID change
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
[PATCH 1/2] pxa: introduced cpu_is_pxa935() and cpu_is_pxa9xx()
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
Re: [PATCH 1/2] lcd: add support for Toppoly TDO35S series to tdo24m driver
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
Re: [PATCH 1/2] lcd: add support for Toppoly TDO35S series to tdo24m driver
- From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
Re: [Pull request] E-series updates
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
[PATCH 3/3] pxa: move I2C pin configurations out into board specific files
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
[PATCH 2/3] pxa: register Power I2C device only when necessary
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
[PATCH 1/3] pxa: move power I2C device definitions into devices.c
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
[PATCH 0/3] pxa: i2c devices code cleanup
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
[PATCH 8/8] pxa: further cleanup of pxa-regs.h
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
[PATCH 7/8] pxa: move GPIOx_BASE and GPIO register offsets to gpio.c
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
[PATCH 6/8] pxa: move AC97 register definitions into dedicated regs-ac97.h
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
[PATCH 5/8] pxa: move UART register definitions into dedicated regs-uart.h
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
[PATCH 4/8] pxa: move pxa2xx specific PWRMODE definitions into pxa2xx-regs.h
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
[PATCH 3/8] pxa: remove the now unused IMPMCR/IMPMSR register definitions
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
[PATCH 2/8] pxa: remove unused PWM register definitions, use generic PWM API
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
[PATCH 1/8] pxa: move FICP register definitions into pxaficp_ir.c
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
[PATCH 0/8] further separation of pxa-regs.h
- From: "Eric Miao" <eric.y.miao@xxxxxxxxx>
Re: [RFC 2.6.27 1/1] gpiolib: add support for batch set of pins
- From: "Jaya Kumar" <jayakumar.lkml@xxxxxxxxx>
Re: [PATCH 08/16] RealView: Add support for the Cortex-A8 Platform Baseboard
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [RFC 2.6.27 1/1] gpiolib: add support for batch set of pins
- From: "Jaya Kumar" <jayakumar.lkml@xxxxxxxxx>
Re: [PATCH 08/16] RealView: Add support for the Cortex-A8 Platform Baseboard
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
Re: [RFC 2.6.27 1/1] gpiolib: add support for batch set of pins
- From: "Jaya Kumar" <jayakumar.lkml@xxxxxxxxx>
The changes so far... (and what you need to check or update in your patches)
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [Pull request] E-series updates
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [PATCH 08/16] RealView: Add support for the Cortex-A8 Platform Baseboard
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [for-next] [ARM] S3C64XX: Initial arch header files
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [for-next] [ARM] S3C64XX: Initial arch directory
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [for-next] [ARM] S3C24A0: Initial architecture support files
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: S3C: Header moves round 2
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [for-next] [ARM] S3C24A0: arch/arm/mach-s3c24a0/include/mach header files
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
[PATCH 00/11] Omap gpio updates for review for 2.6.29 merge window
- From: Tony Lindgren <tony@xxxxxxxxxxx>
Re: [PATCH] [MMC]: Add a MX2/MX3 specific SDHC driver
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH] [MMC]: Add a MX2/MX3 specific SDHC driver
- From: Julien Boibessot <julien.boibessot@xxxxxxx>
Re: MioA701's dependency on LEDS_GPIO?
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
Re: ARM922t: Linux Kernel 2.6.26.3, unknown relocation: 40
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
git pull request for the current -rc kernel
- From: Nicolas Pitre <nico@xxxxxxx>
Re: ARM922t: Linux Kernel 2.6.26.3, unknown relocation: 40
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
RE: ARM922t: Linux Kernel 2.6.26.3, unknown relocation: 40
- From: "Vivek Kumar Gupta" <gkvivek@xxxxxxxxx>
Re: [PATCH] Make ALIGNMENT_TRAP option visible to allow disabling it
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: ARM922t: Linux Kernel 2.6.26.3, unknown relocation: 40
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
RE: ARM922t: Linux Kernel 2.6.26.3, unknown relocation: 40
- From: "Vivek Kumar Gupta&q