Re: FC3 won't boot on Gigabyte K8NS-Ultra-939

[Robert L Cochran <cochranb@xxxxxxxxxxxxx>]

You won't be able to use a cheap power supply with a 6800 card. And if 
the supply is really bad, it can damage your system components. You need 
at least a 430 watt power supply for that video card. Antec's top of the 
line supply recently got the best rating from Maximum PC magazine, which 
rated 7 different power supplies. You might want to read that. PC Power 
& Cooling's TurboCool came in second.

Bob Cochran

Doug Stewart wrote:

> Doug Stewart wrote:
>
> > Howdy all,
> > I'm hoping you could point me in the right direction on this one.
> >
> > I've recently acquired a spankin' new machine based on the 
> > K8NS-Ultra. I've got a single SATA drive attached to the Sil 
> > controller (I know, I know, the nForce SATA controller supposedly IS 
> > a Sil one; I'm talking about the separate one).
> >
> > 've installed FC3 (x86-64 edition) twice on it. The install goes 
> > flawlessly, but when I reboot, I never even get to the grub screen - 
> > the bios just complains "No operating systems found". FC seems to 
> > think I'm installing on /dev/sda, so on a hunch, I tried booting off 
> > a rescue disk and running `grub-install /dev/sda`. This took far 
> > longer than I have ever encountered on a non-AMD64 system, but 
> > eventually came back and reported no errors.
> >
> > Upon reboot, I still received "No operating systems found". Help!
>
> Thanks to all who have replied to me off-list. I'm thinking that, 
> based upon some additional Google researching (and the fact that the 
> power supply fan alarm is going off and issues I've had with a GeForce 
> 6800 in the machine) that it may, in fact, be a power supply issue.
>
> I'll check back in once I know more.

--

amd64-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/amd64-list