On Tuesday 14 December 2010 19:53:22 ext Mark Brown wrote:
> Attempt to minimise audible effects from mixer and mux updates by
> implementing the actual register changes between powering down widgets
> that have become unused and powering up widgets that are newly used.
>
> This means that we're making the change with the minimum set of widgets
> powered, that the input path is connected when we're powering up widgets
> (so things like DC offset correction can run with their signal active)
> and that we bring things down to cold before switching away. Since
> hardware tends to be designed for the power on/off case more than for
> dynamic reconfiguration this should minimise pops and clicks during
> reconfiguration while active.
>
> Signed-off-by: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> ---
>
> Peter, I think this will address your widget reordering issue - I'd
> appreciate it if you could test and let me know if it helps. If this
> works it avoids the need for the the widget to know anything about the
> particular algorithm implemented by DAPM which seems more robust to me.
>
> Sorry about how long it took to get this done.
I'll try to give this one a try soon, sorry for the delay, but I got
sidetracked...
--
Péter
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
[ALSA User]
[Linux Audio Users]
[Kernel Archive]
[Asterisk PBX]
[Photo Sharing]
[Linux Sound]
[Video 4 Linux]
[Gimp]
[Yosemite News]
