Re: Constraining the number of frames per period

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


> > I am trying to constrain the number of frames per period (not the number of
> > periods).  The DMA transfer creates an interrupt every 512 frames (1 frame =
> > 16 channels with 32bits per channel) .  I am having a difficult time
> > understanding how to properly write the ALSA driver so that it will work
> > with many different formats and between 1 and 2 channels.
>
> Using period_bytes_min/max doesn't work for this situation; these fields
> are intended for hardware that has constraints on the number of bytes.
>
> Set the snd_pcm_hardware fields so that all sample formats are supported.


I do not understand why I need to add all of the sample formats, but I
went ahead and changed snd_pcm_hardware to:
.formats = (SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S8 |
               SNDRV_PCM_FMTBIT_U16_LE | SNDRV_PCM_FMTBIT_S16_LE |
               SNDRV_PCM_FMTBIT_U16_BE | SNDRV_PCM_FMTBIT_S16_BE |
               SNDRV_PCM_FMTBIT_U24_LE | SNDRV_PCM_FMTBIT_S24_LE |
               SNDRV_PCM_FMTBIT_U24_BE | SNDRV_PCM_FMTBIT_S24_BE |
               SNDRV_PCM_FMTBIT_U24_3LE | SNDRV_PCM_FMTBIT_S24_3LE |
               SNDRV_PCM_FMTBIT_U24_3BE | SNDRV_PCM_FMTBIT_S24_3BE |
               SNDRV_PCM_FMTBIT_U32_LE | SNDRV_PCM_FMTBIT_S32_LE |
               SNDRV_PCM_FMTBIT_U32_BE | SNDRV_PCM_FMTBIT_S32_BE),


> In the PCM device's open callback, add another constraint by calling
> snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_PERIOD_SIZE, 512, 512);


Thank you!  This worked as you described and the applications now
select a period of 512 frames.


>>     // the max number of bytes in one PCM stream
>>     // must allow for a minimum of 4 periods with
>>     // 512 frames per period and up to 2 channels of
>>     // 32 bit data per frame
>>     .buffer_bytes_max = 32768,  // this value allows 8 periods of the max frame size

> Are the minimum 4 and maximum 8 periods actual hardware constraints?

Not really.  Mark Brown of WolfsonMicro helped me discover that I
needed at least 3 periods so that there would always be one playing in
the DMA buffer, one ready to play, and one able to be written to.  I
selected 4 periods as a minimum because it made it easier for me to
figure out good sizes for the DMA buffer.  There is no true hardware
constraint on the max number of periods but I do need to keep my DMA
period buffer size smaller than 64kb because the 2d transfer mode that
is implemented by the blackfin BF537 sport driver (bf5xx-sport.c)
doesn't seem to work properly.  If I stay below 64kb it doesn't need
to use 2d DMA mode.

I have had much better results after these changes but am still not
100% happy with the driver.  There is still some choppiness when
playing a wav file using aplay.  It seems like there are some xrun
conditions that occur just at the start of playback and then work
themselves out.  I am not sure if I have latest aplay because it came
with the Blackfin distribution of uClinux. I'll look into it further.
I also have some problems with the OSS emulation not working properly
every time.  I do not plan to use OSS in my actual application so I
can ignore that for now.

Thank you Clemens and Jaroslav for your help.  I will email again if I
have any more questions.

-Adam
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel



[ALSA User]     [Linux Audio Users]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

Add to Google Powered by Linux