Re: Verifying mixer dB data/Invalid dB data from USB cards, especially Aureon 5.1 MkII

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Feb 16, 2010 at 10:07:03PM +0100, Lennart Poettering wrote:
> On Tue, 16.02.10 17:29, Jaroslav Kysela (perex@xxxxxxxx) wrote:

> > Basically, if I remember correctly the discussion, 0dB on all elements 
> > should main unchanged volume, <0dB attenuation and >0dB gain.

> But you need some kind of "anchor" for that. What you write above
> applies only for elements that have some kind of analog input and
> output. But the most interesting components are probably the DAC and
> ADC (i.e. the "innermost" elements), and it's not clear what level they
> output, so the "anchor" for the relative dB values is missing...

Typically the DACs and ADCs will have a full scale signal at line
reference level - it should generally be a good approximation with
nothing else to go on.

> If you plot this it looks as if the card actually only implements 10
> or so discrete steps, and at around 10000 just becomes a constant
> function.

That's quite common.
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux