[Prev Page][Next Page]
- Re: ANNOUNCE: Oz 0.9.0 Release, (continued)
- Live Snapshot and Rebasing using blockpull,
Andrew Martin
- Where does "cmd" initailize in qemu_command.c?,
He Xin
- getCPUStats of a domain by a non-root user - libvirtError: Requested operation is not valid: cgroup CPUACCT controller is not mounted,
Anton Beloglazov
- disappeared VM in virsh,
Akendo
- vm pxe fail,
Andrew Holway
- error: virsh not could create bridge interface,
Gao Yongwei
- What can cause "libvirtd dead but pid file exists.",
xuanmao_001
- Source of Qcow2 Image Corruption,
Andrew Martin
- Error: virNetSocketReadWire:904 : Cannot recv data: Input/output error,
Adarsh Guler
- How to use ext transport?,
Christian Schmidt
- Which functions call qemu_driver API?,
He Xin
- quickest way to stop VM,
Harish Patil
- iptables: cannot port forward,
Mauricio Tavares
- Does Libvirt-0.8.8(windows) support URI like qemu+ssh on windows?,
xuanmao_001
- How much ways can libvirt connect to a qemu instance?,
何鑫
- libvirtd crashes after guest migration with attached console,
Andrey Korolyov
- virsh dump,
Harish Patil
- virDomainMigrate() leads to SASL error,
Olivier Doucet
- [libvirt] virDomainMemoryStats call,
Parakkal, Navin S
- libvirtd may need to be started: Permission denied,
何鑫
- migration with non-root user,
Yih Chuang
- Channel with virtio problem,
norazah aziz
- Bug in VNC QEMU?,
Nikita A Menkovich
- How the libvirtd connect to qemud in source codes?,
何鑫
- Remote Shutdown of Server 2008,
Gutierrez-Robles, Frank
- Authentication via SASL and LDAP?,
Andrew Martin
- using RBD with libvirt 0.9.13,
Jeff Strunk
- Unable to load library 'virt',
zhijun liu
- error deploying a vm: Operation not permitted,
Michael Rebstock
- Opteron_G4 CPU under libvirt 0.9.12,
Michael Beham
- CPU Flags libvirt 0.9.12,
Michael Beham
- How to connect to local hpyervisor by libvirt?,
何鑫
- Determine state of the guest OS/kernel from host,
Harish Patil
- Excluding RAW disk from snapshot,
Trey Dockendorf
libvirt windows error,
zhijun liu
libvirt: how to set PV-on-HVM drivers??,
zcs
live migration causes guest system to crash when accessing the network,
Sebastian J. Bronner
mouse pointer not in sync after live migration,
Stefan
Re: libvirt-users Digest, Vol 31, Issue 39,
Borden Rhodes
Can't NAT in KVM,
Borden Rhodes
No /dev/tty device within LXC guest?,
Yufang Zhang
CPU-Capabilties for Nested Virtualization,
Michael Beham
virsh iface-list error,
Arun Sharma
How can I make sVirt work with LXC (libvirt-0.9.13)?,
David Kang
help about libvirt console,
lei yang
libvirt shortcomings of virsh domxml-to-native and domxml-from-native,
张光鹏
INTERNAL ERROR:can not attach network interface for vm,
Gao Yongwei
Preferred CPU model not allowed by hypervisor,
Jared
vm grub errors,
aprender-caminando
VM dies with error regarding "virConnectNumOfInterfaces",
Helga Velroyen
duplicate domain ids!?,
matt cowan
Matching host and guest CPU,
Alex
Questions related to the snapshot,
lin tan
save / restore RAM state - Problem,
Evaggelos Balaskas
virsh define function question,
zhanggp
Setting CPU type for a vm,
Mauricio Tavares
Virsh Failing to Snapshot VMWare VM with Multiple Disks,
Elizabeth Griffith
virDomainMemoryStats call,
Parakkal, Navin S
Attaching usb devices,
Mauricio Tavares
Set IP for LXC-container through libvirt XML,
Timothy Klim
qemu-ga : windows 2008 64bit not working.,
desi babu
Is there a version with libvirt supporting domain Autostart?,
xuanmao_001
Using virsh to load scripts for the guest machine,
Mauricio Tavares
ubuntu 12.04 x64 virt-manager 0.9.1,
Kobi Biton
PCI passthrough troubles,
mike allison
Re: [ovs-discuss] OpenVswitch with KVM virtual machines,
Neha Jatav
Different SAS controller IDs,
Anton Nikiforov
Starting a program inside VM through libvirt,
Jørgen Nordmoen
PCI-Passthrough suddenly stopped working,
Rouven Sacha
storage volume's size change,
Shantanu Pavgi
compiling docs from git,
Arindam Choudhury
I can't virt-clone into an existing LVM now (ERROR: clone onto existing storage volume is not supported:) - i could in previous lbvirt versions? (deployment scripts no longer work...),
Morgan Cox
Live Block Migration with additional attached storage,
Chun-Hung Chen
segfault on snapshot-list, 0.9.13,
Andrey Korolyov
What is the procedure of libvirt internal when you run a domain.,
xuanmao_001
live migration,
hcyy
Adding a second lv as vm drive: how to set the pci part,
Mauricio Tavares
Issue with getCPUStats and getMemoryStats,
Ananth
OpenVswitch with KVM virtual machines,
Neha Jatav
guest VM waiting for a symbol at serial console,
Andrey Korolyov
Metadata accessible within guests,
Renich Bon Ciric
Why the xen vm memory won't bloon,
Tony Huang
CPU usage by libvirtd,
Zhihua Che
numa query,
kapil jain
Problem halting/restaring a lxc container from within,
david
About IBM PowerVM hypervisor support,
Dennis Chen
using vmchannel between 6.x host/guests,
Michael MacDonald
Reboot KVM guest failed via virsh!,
GaoYi
idle connections (?),
Evaggelos Balaskas
virsh iface-list () - function is not supported,
Ananth
Query:Creating a Guest that requires memory and vCPUs across socket boundary,
sanjay
Storage Pools & nodedev-create specific scsi_host#?,
mdecheser
How to start a storage pool using libvirt?,
Ananth
Speed of physical NIC?,
Marcel Müller
How does libvirt interaction with KVM to create a VM?,
Dennis Chen
Trouble connecting to XenServer HyperVisor with Java bindings,
Nick Mathews
manipulation extra features which hypervisors support,
Rashid Zamani
Can I update the DNS configuration of an existing network?,
Kees van Reeuwijk
USB Host Controllers,
Michael Hierweck
Is it possible to in live migration?,
GaoYi
editing pools,
Dave Allan
virtio_rng in a KVM VM,
Marc Haber
Remote virtualization with Xen, feasibility,
Jørgen Nordmoen
unable to creating/list storage pools using non-root user,
mallapadi niranjan
Libvert live migration problem!,
GaoYi
Cannot create macvlan devices on this platform,
Michael Hierweck
How to obtain guest's monthly internet bandwidth usage?,
Tony Huang
update virDomainDef with xml config,
xuanmao_001
getting name or uuid of vm within guest OS,
Behrooz
caps->nguests == 0?,
Zhihua Che
Re: [Qemu-devel] How to management KVM virtual machines via libvirt?,
陳韋任 (Wei-Ren Chen)
How to update the QEMU of libvirt?,
GaoYi
How to set cpu limits to xen domU in libvirt,
Tony Huang
unsupported configuration: Reboot is not supported with this QEMU binary,
Xing.x.Gao
question regarding CMPIObjectPath,
Ashish Dalela
can not connect hypervisor using libvirt-0.9.11 on windows,
xuteng
Libvirt hangs until service is stopped and started again,
Ananth
What's the most recent compatible libvirt and qemu-kvm?,
Whit Blauvelt
Reconnection problem with a USB device,
Dale Amon
Re: How can a bridge be optimized,
Whit Blauvelt
ruby-libvirt connection stays open,
"Gergely Pál - night[w]"
How to list and change domain's disk image file,
Ricardo Hillbrecht
virsh: migration job: unexpectedly failed,
Xing.x.Gao
Fine grained authorisation,
Sam Wilson
qemu-img snapshots with backing stores?,
Sean Abbott
The default location of vm snapshots,
SimpleCloud
A RFE for libvirt,
whuang
PCI Passthrough, AMD, fails to initialize,
Chris Sanders
guest fails to start: Error initializing virtio-net-pci,
Ekkard Gerlach
How can a bridge be optimized?,
Whit Blauvelt
Resize qcow2 disks,
Javi Legido
The LXC container propagate the ro remount to the host mount point,
Sebastien Douche
Image booted using libvirt with --arch=i686 gives a message: Kernel detected only i486 CPU,
Georgy Sebastian Pullolickal
Reg: Info on memory usage from within LXC.,
Alphonse Hansel Anthony
NPIV setup?,
Jason Price
[Fwd: error: this function is not supported by the connection driver : virConnectNumOfStoragePool],
Onkar
How to configure cpu frequency of guest,
hongming
win-xp guest after reboot: could not open disk image /dev/sr0: mo medium found and extreme sluggisch,
Ekkard Gerlach
create net if, but not connect,
Sergio Kvjato
how to store an internal disk snapshot by use,
Rujie Xu
New Bugzilla components for upstream bug reporting,
Daniel P. Berrange
[libivrt-users] What features of kernel are required to support virDomainGetCPUStats?,
Zhihua Che
What features of kernel are required to support virDomainGetCPUStats?,
Zhihua Che
some problem with snapshot by libvirt,
xingxing gao
Virtual Machines Stay Off If Rebooted,
Andrew Martin
Spawn new domains from a snapshot.,
NoxDaFox
How to specify the libvirtd in connect call,
Zhihua Che
monitor socket did not show up.: No such file or directory,
vipul borikar
Renaming a LVM LV (where is vol-edit??),
Dax Kelson
Failed to mount devpts,
Marco Yuen
Problem with pty,
Daniele Milani
Cannot connect to the existing LXC containers (console),
Sebastien Douche
Migration with rbd storage backend,
Andrey Korolyov
USB passthrough of all USB-slots to guest,
eGerlach
lxc: Add /dev/tty to lxcContainerPopulateDevices() ?,
Sukadev Bhattiprolu
Using virsh to connect to ESX,
Mauro Monteiro
libvirt, lxc, "/dev/log" ENOENT,
dennis jenkins
Python 3.2 support for libvirt API?,
Patrick Wilbur
Script execution at Boot,
vipul borikar
Permission issue with cgroups,
Antonio Carlos Salzvedel Furtado Junior
libvirtd fails to start on f16 64bit,
Chad Roberts
segfault with libvirt-0.9.11.3-1,
ovirt
Forward port 4444 to a static-IP VM,
Sean Abbott
serial console,
John Wayne
creating a domain,
John Wayne
Libvirt java binding crash Tomcat,
Hubert Zhang
F14->F16 Upgrade Results in Win2003 Server Client BSOD 0x7f,
Thomas J. Baker
Passing dhcp-options,
Michael Hierweck
virsh console logging and pty usage,
Doug Goldstein
release open_disk error,
Frido Roose
SSH connection timeout,
Ananth
creation of storage volume fails,
John Wayne
libvirt read only connections upgraded to full access connections,
Doug Goldstein
list storage pools and volumes using python api calls,
Syed A. Ali
libvirt python api for storage-volumes and storage-pools,
John Wayne
Destroy VM failed.,
david_zhu
Submission Deadline Extension,
VHPC 12
storage-pools and volumes,
John Wayne
printing domain information,
John Wayne
listing active and defined vs inactive and defined domains,
John Wayne
maxvcpu,
John Wayne
Libvirt heavy CPU usage,
Samuel Hassine
Libvirt LXC and VCPU?,
Samuel Hassine
free memory on hypervisor,
John Wayne
ESX support for virt-install,
Filip Skola
USB passthrough: flexible configuration in XML-file needed,
eGerlach
communicate with vm,
me,apporc
Snooze energy-efficient cloud manager is available as open-source!,
Eugen Feller
Python Libvirt Bindings,
John Wayne
serial console locking for a domain (concurrent access = garbled output),
Dusty Mabe
question of iSCSI pool on the same iSCSI target,
david_zhu
Is there a way for telling libvirt to auto define an xml under /etc/libvirt/qemu?,
Raoul Scarazzini
Regarding persistence of VM's after live migration (virDomainMigrateToURI() problem),
Coding Geek
Non-Root not able to use openReadOnly(),
vipul borikar
Installing the python libvirt bindings in a virtualenv,
Daniel Gonzalez
Snapshot system: really confusing.,
NoxDaFox
Using Sys::Virt with Libvirt,
John Wayne
Error on running libvirt (dnsmasq),
John Wayne
Creating Domain and moving a kvm disk under libvirt control,
James Allsopp
USB Passthrough of two identical devices,
Hendrik Friedel
CfP 7th Workshop on Virtualization in High-Performance Cloud Computing (VHPC'12),
VHPC 12
Building an RPM,
John Wayne
Problems using latest qemu-kvm and latest libvirt ( hvm missing ),
Bhasker C V
USB Passthrough with two identical devices,
Hendrik Friedel
Ansis Atteka has invited you to use Google Talk,
Ansis Atteka
What does cpu_time returned by virDomainGetCPUStats mean?,
Zhihua Che
A way to determine when a guest domain was launched?,
Amy Skinner
What's the precision of the domain cpu stats?,
Zhihua Che
libvirt slow responding after define poool with existing VG with some other lv,
Anton Gorlov
Guests can't connect to each other,
Anthony Bourguignon
Console to RHEL6.1 container,
Sukadev Bhattiprolu
Live migration of instance using KVM hypervisor fails,
Gurjar, Unmesh
help:any docs for open vswitch supporting?,
yue wang
No way to obtain guest's cpu and mem usage?,
RaSca
Can I get all esx servers by virsh connecting vcenter?,
li_fuqiong
Libvirtd not starting on reboot,
Shawn Davis
vol-wipe and delete,
Shawn Davis
Libvirt-0.9.11 compilation on Centos 5.6,
Rajat Mehrotra
virsh works but libvirt-java throws a 'No route to host',
Jon Drews
NFS + sanlock problems,
Kyrre Begnum
qemu-kvm fails on RHEL6,
sumit sengupta
[API reference] Are there XML-handling API to retrieve info directly from xml configure file,
Zhihua Che
Is this Race Condition?,
Zhihua Che
virsh attach-disk with cache=none and io=native for raw devices (online),
Frido Roose
Bare libvirt web interface,
RaSca
vcpupin and kvm,
Geoff Galitz
[Fedora Users]
[Red Hat Install]
[Red Hat Sound]
[Red Hat Development]
[Linux Kernel]
