Re: [PATCH v12 01/11] change used_by: specify both driver and domain

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello ChunYan,

Good to see your patchset into smaller pieces. This patch looks almost
OK for me, but there are problems you'll need to look into.

On Mon, 2014-02-17 at 14:32 +0800, Chunyan Liu wrote:
> Add driver info to used_by, to avoid conflict among different drivers if there
> are more than one drivers existing and using the hostdev.
> 
> Signed-off-by: Chunyan Liu <cyliu@xxxxxxxx>
> ---
>  src/lxc/lxc_hostdev.c   |   11 +++++++----
>  src/qemu/qemu_conf.h    |    2 ++
>  src/qemu/qemu_driver.c  |    8 ++++----
>  src/qemu/qemu_hostdev.c |   41 +++++++++++++++++++++++++----------------
>  src/util/virpci.c       |   30 +++++++++++++++++++++++-------
>  src/util/virpci.h       |    9 ++++++---
>  src/util/virscsi.c      |   30 ++++++++++++++++++++++--------
>  src/util/virscsi.h      |    7 +++++--
>  src/util/virusb.c       |   29 ++++++++++++++++++++++-------
>  src/util/virusb.h       |    8 ++++++--
>  tests/virscsitest.c     |    6 +++---
>  11 files changed, 125 insertions(+), 56 deletions(-)
> 
> diff --git a/src/lxc/lxc_hostdev.c b/src/lxc/lxc_hostdev.c
> index 3b371fc..77ce965 100644
> --- a/src/lxc/lxc_hostdev.c
> +++ b/src/lxc/lxc_hostdev.c
> @@ -60,7 +60,7 @@ virLXCUpdateActiveUsbHostdevs(virLXCDriverPtr driver,
>              continue;
>          }
>  
> -        virUSBDeviceSetUsedBy(usb, def->name);
> +        virUSBDeviceSetUsedBy(usb, "QEMU", def->name);

You meant LXC_DRIVER_NAME rather than "QEMU" here, right?

>          virObjectLock(driver->activeUsbHostdevs);
>          if (virUSBDeviceListAdd(driver->activeUsbHostdevs, usb) < 0) {
> @@ -90,7 +90,9 @@ virLXCPrepareHostdevUSBDevices(virLXCDriverPtr driver,
>      for (i = 0; i < count; i++) {
>          virUSBDevicePtr usb = virUSBDeviceListGet(list, i);
>          if ((tmp = virUSBDeviceListFind(driver->activeUsbHostdevs, usb))) {
> -            const char *other_name = virUSBDeviceGetUsedBy(tmp);
> +            const char *other_name = NULL;
> +            const char *other_drvname = NULL;
> +            virUSBDeviceGetUsedBy(tmp, &other_drvname, &other_name);
>  
>              if (other_name)
>                  virReportError(VIR_ERR_OPERATION_INVALID,
> @@ -103,7 +105,7 @@ virLXCPrepareHostdevUSBDevices(virLXCDriverPtr driver,
>              goto error;
>          }
>  
> -        virUSBDeviceSetUsedBy(usb, name);
> +        virUSBDeviceSetUsedBy(usb, "QEMU", name);

Same here, I guess that should be LXC_DRIVER_NAME, no?

>          VIR_DEBUG("Adding %03d.%03d dom=%s to activeUsbHostdevs",
>                    virUSBDeviceGetBus(usb), virUSBDeviceGetDevno(usb), name);
>          /*
> @@ -352,6 +354,7 @@ virLXCDomainReAttachHostUsbDevices(virLXCDriverPtr driver,
>          virDomainHostdevDefPtr hostdev = hostdevs[i];
>          virUSBDevicePtr usb, tmp;
>          const char *used_by = NULL;
> +        const char *used_by_drvname = NULL;
>  
>          if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS)
>              continue;
> @@ -389,7 +392,7 @@ virLXCDomainReAttachHostUsbDevices(virLXCDriverPtr driver,
>              continue;
>          }
>  
> -        used_by = virUSBDeviceGetUsedBy(tmp);
> +        virUSBDeviceGetUsedBy(tmp, &used_by_drvname, &used_by);

Where is used_by_drvname used? If that really isn't used, then replacing
it by NULL would be fine.

>          if (STREQ_NULLABLE(used_by, name)) {
>              VIR_DEBUG("Removing %03d.%03d dom=%s from activeUsbHostdevs",
>                        hostdev->source.subsys.u.usb.bus,
> diff --git a/src/qemu/qemu_conf.h b/src/qemu/qemu_conf.h
> index 1f44a76..158cc1a 100644
> --- a/src/qemu/qemu_conf.h
> +++ b/src/qemu/qemu_conf.h
> @@ -53,6 +53,8 @@
>  #  error "Port me"
>  # endif
>  
> +# define QEMU_DRIVER_NAME "QEMU"
> +
>  typedef struct _virQEMUDriver virQEMUDriver;
>  typedef virQEMUDriver *virQEMUDriverPtr;
>  
> diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c
> index 59e018d..1fe8992 100644
> --- a/src/qemu/qemu_driver.c
> +++ b/src/qemu/qemu_driver.c
> @@ -97,8 +97,6 @@
>  
>  #define VIR_FROM_THIS VIR_FROM_QEMU
>  
> -#define QEMU_DRIVER_NAME "QEMU"
> -
>  #define QEMU_NB_MEM_PARAM  3
>  
>  #define QEMU_NB_BLOCK_IO_TUNE_PARAM  6
> @@ -11325,7 +11323,9 @@ qemuNodeDeviceReAttach(virNodeDevicePtr dev)
>      virObjectLock(driver->inactivePciHostdevs);
>      other = virPCIDeviceListFind(driver->activePciHostdevs, pci);
>      if (other) {
> -        const char *other_name = virPCIDeviceGetUsedBy(other);
> +        const char *other_name = NULL;
> +        const char *other_drvname = NULL;
> +        virPCIDeviceGetUsedBy(other, &other_drvname, &other_name);

Is other_drvname used anywhere? Seems not from the patch, so using NULL
would surely be preferable.

>          if (other_name)
>              virReportError(VIR_ERR_OPERATION_INVALID,
> @@ -16684,7 +16684,7 @@ static virDriver qemuDriver = {
>  
> 
>  static virStateDriver qemuStateDriver = {
> -    .name = "QEMU",
> +    .name = QEMU_DRIVER_NAME,
>      .stateInitialize = qemuStateInitialize,
>      .stateAutoStart = qemuStateAutoStart,
>      .stateCleanup = qemuStateCleanup,
> diff --git a/src/qemu/qemu_hostdev.c b/src/qemu/qemu_hostdev.c
> index 1b16386..01c24f9 100644
> --- a/src/qemu/qemu_hostdev.c
> +++ b/src/qemu/qemu_hostdev.c
> @@ -177,7 +177,7 @@ qemuUpdateActivePciHostdevs(virQEMUDriverPtr driver,
>                  goto cleanup;
>  
>          }
> -        virPCIDeviceSetUsedBy(dev, def->name);
> +        virPCIDeviceSetUsedBy(dev, QEMU_DRIVER_NAME, def->name);
>  
>          /* Setup the original states for the PCI device */
>          virPCIDeviceSetUnbindFromStub(dev, hostdev->origstates.states.pci.unbind_from_stub);
> @@ -230,7 +230,7 @@ qemuUpdateActiveUsbHostdevs(virQEMUDriverPtr driver,
>              continue;
>          }
>  
> -        virUSBDeviceSetUsedBy(usb, def->name);
> +        virUSBDeviceSetUsedBy(usb, QEMU_DRIVER_NAME, def->name);
>  
>          if (virUSBDeviceListAdd(driver->activeUsbHostdevs, usb) < 0) {
>              virUSBDeviceFree(usb);
> @@ -274,13 +274,13 @@ qemuUpdateActiveScsiHostdevs(virQEMUDriverPtr driver,
>              goto cleanup;
>  
>          if ((tmp = virSCSIDeviceListFind(driver->activeScsiHostdevs, scsi))) {
> -            if (virSCSIDeviceSetUsedBy(tmp, def->name) < 0) {
> +            if (virSCSIDeviceSetUsedBy(tmp, QEMU_DRIVER_NAME, def->name) < 0) {
>                  virSCSIDeviceFree(scsi);
>                  goto cleanup;
>              }
>              virSCSIDeviceFree(scsi);
>          } else {
> -            if (virSCSIDeviceSetUsedBy(scsi, def->name) < 0 ||
> +            if (virSCSIDeviceSetUsedBy(scsi, QEMU_DRIVER_NAME, def->name) < 0 ||
>                  virSCSIDeviceListAdd(driver->activeScsiHostdevs, scsi) < 0) {
>                  virSCSIDeviceFree(scsi);
>                  goto cleanup;
> @@ -693,7 +693,9 @@ qemuPrepareHostdevPCIDevices(virQEMUDriverPtr driver,
>           * the dev is in list driver->activePciHostdevs.
>           */
>          if ((other = virPCIDeviceListFind(driver->activePciHostdevs, dev))) {
> -            const char *other_name = virPCIDeviceGetUsedBy(other);
> +            const char *other_name = NULL;
> +            const char *other_drvname = NULL;
> +            virPCIDeviceGetUsedBy(other, &other_drvname, &other_name);

Again, other_drvname seems to be unused.

>              if (other_name)
>                  virReportError(VIR_ERR_OPERATION_INVALID,
> @@ -766,7 +768,7 @@ qemuPrepareHostdevPCIDevices(virQEMUDriverPtr driver,
>          activeDev = virPCIDeviceListFind(driver->activePciHostdevs, dev);
>  
>          if (activeDev)
> -            virPCIDeviceSetUsedBy(activeDev, name);
> +            virPCIDeviceSetUsedBy(activeDev, QEMU_DRIVER_NAME, name);
>      }
>  
>      /* Loop 8: Now set the original states for hostdev def */
> @@ -857,7 +859,9 @@ qemuPrepareHostdevUSBDevices(virQEMUDriverPtr driver,
>      for (i = 0; i < count; i++) {
>          virUSBDevicePtr usb = virUSBDeviceListGet(list, i);
>          if ((tmp = virUSBDeviceListFind(driver->activeUsbHostdevs, usb))) {
> -            const char *other_name = virUSBDeviceGetUsedBy(tmp);
> +            const char *other_name = NULL;
> +            const char *other_drvname = NULL;
> +            virUSBDeviceGetUsedBy(tmp, &other_drvname, &other_name);

Here too.

>              if (other_name)
>                  virReportError(VIR_ERR_OPERATION_INVALID,
> @@ -870,7 +874,7 @@ qemuPrepareHostdevUSBDevices(virQEMUDriverPtr driver,
>              goto error;
>          }
>  
> -        virUSBDeviceSetUsedBy(usb, name);
> +        virUSBDeviceSetUsedBy(usb, QEMU_DRIVER_NAME, name);
>          VIR_DEBUG("Adding %03d.%03d dom=%s to activeUsbHostdevs",
>                    virUSBDeviceGetBus(usb), virUSBDeviceGetDevno(usb), name);
>          /*
> @@ -1140,10 +1144,10 @@ qemuPrepareHostdevSCSIDevices(virQEMUDriverPtr driver,
>                  goto error;
>              }
>  
> -            if (virSCSIDeviceSetUsedBy(tmp, name) < 0)
> +            if (virSCSIDeviceSetUsedBy(tmp, QEMU_DRIVER_NAME, name) < 0)
>                  goto error;
>          } else {
> -            if (virSCSIDeviceSetUsedBy(scsi, name) < 0)
> +            if (virSCSIDeviceSetUsedBy(scsi, QEMU_DRIVER_NAME, name) < 0)
>                  goto error;
>  
>              VIR_DEBUG("Adding %s to activeScsiHostdevs", virSCSIDeviceGetName(scsi));
> @@ -1275,10 +1279,14 @@ qemuDomainReAttachHostdevDevices(virQEMUDriverPtr driver,
>           * been used by this domain.
>           */
>          activeDev = virPCIDeviceListFind(driver->activePciHostdevs, dev);
> -        if (activeDev &&
> -            STRNEQ_NULLABLE(name, virPCIDeviceGetUsedBy(activeDev))) {
> -            virPCIDeviceListDel(pcidevs, dev);
> -            continue;
> +        if (activeDev) {
> +                const char *tmp_name = NULL;
> +                const char *tmp_drvname = NULL;
> +                virPCIDeviceGetUsedBy(activeDev, &tmp_drvname, &tmp_name);

Is tmp_drvname actually used?

> +                if (STRNEQ_NULLABLE(name, tmp_name)) {
> +                    virPCIDeviceListDel(pcidevs, dev);
> +                    continue;
> +                }
>          }
>  
>          virPCIDeviceListDel(driver->activePciHostdevs, dev);
> @@ -1333,6 +1341,7 @@ qemuDomainReAttachHostUsbDevices(virQEMUDriverPtr driver,
>          virDomainHostdevDefPtr hostdev = hostdevs[i];
>          virUSBDevicePtr usb, tmp;
>          const char *used_by = NULL;
> +        const char *used_by_drvname = NULL;
>  
>          if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS)
>              continue;
> @@ -1370,7 +1379,7 @@ qemuDomainReAttachHostUsbDevices(virQEMUDriverPtr driver,
>              continue;
>          }
>  
> -        used_by = virUSBDeviceGetUsedBy(tmp);
> +        virUSBDeviceGetUsedBy(tmp, &used_by_drvname, &used_by);

Same here, used_by_drvname isn't used.

>          if (STREQ_NULLABLE(used_by, name)) {
>              VIR_DEBUG("Removing %03d.%03d dom=%s from activeUsbHostdevs",
>                        hostdev->source.subsys.u.usb.bus,
> @@ -1445,7 +1454,7 @@ qemuDomainReAttachHostScsiDevices(virQEMUDriverPtr driver,
>                     hostdev->source.subsys.u.scsi.unit,
>                     name);
>  
> -        virSCSIDeviceListDel(driver->activeScsiHostdevs, tmp, name);
> +        virSCSIDeviceListDel(driver->activeScsiHostdevs, tmp, QEMU_DRIVER_NAME, name);
>          virSCSIDeviceFree(scsi);
>      }
>      virObjectUnlock(driver->activeScsiHostdevs);
> diff --git a/src/util/virpci.c b/src/util/virpci.c
> index 00d1064..4ea2bcf 100644
> --- a/src/util/virpci.c
> +++ b/src/util/virpci.c
> @@ -59,7 +59,10 @@ struct _virPCIDevice {
>      char          name[PCI_ADDR_LEN]; /* domain:bus:slot.function */
>      char          id[PCI_ID_LEN];     /* product vendor */
>      char          *path;
> -    const char    *used_by;           /* The domain which uses the device */
> +
> +    /* The driver:domain which uses the device */
> +    char          *used_by_drvname;
> +    char          *used_by_domname;

Why changing from const char* to char*?

>      unsigned int  pcie_cap_pos;
>      unsigned int  pci_pm_cap_pos;
> @@ -1635,6 +1638,8 @@ virPCIDeviceFree(virPCIDevicePtr dev)
>      VIR_DEBUG("%s %s: freeing", dev->id, dev->name);
>      VIR_FREE(dev->path);
>      VIR_FREE(dev->stubDriver);
> +    VIR_FREE(dev->used_by_drvname);
> +    VIR_FREE(dev->used_by_domname);
>      VIR_FREE(dev);
>  }
>  
> @@ -1704,16 +1709,27 @@ virPCIDeviceSetReprobe(virPCIDevicePtr dev, bool reprobe)
>      dev->reprobe = reprobe;
>  }
>  
> -void
> -virPCIDeviceSetUsedBy(virPCIDevicePtr dev, const char *name)
> +int
> +virPCIDeviceSetUsedBy(virPCIDevicePtr dev,
> +                      const char *drv_name,
> +                      const char *dom_name)
>  {
> -    dev->used_by = name;
> +    if (VIR_STRDUP(dev->used_by_drvname, drv_name) < 0)
> +        return -1;
> +    if (VIR_STRDUP(dev->used_by_domname, dom_name) < 0)
> +        return -1;
> +

You will leak memory here if there was already a value set, You need to
free dev->used_by_drvname and dev->used_by_domname before VIR_STRDUP'ing
to them.

However, it would be much more convenient to keep const char*.

> +    return 0;
>  }
>  
> -const char *
> -virPCIDeviceGetUsedBy(virPCIDevicePtr dev)
> +void
> +virPCIDeviceGetUsedBy(virPCIDevicePtr dev,
> +                      const char **drv_name,
> +                      const char **dom_name)
>  {
> -    return dev->used_by;
> +    *drv_name = dev->used_by_drvname;
> +    *dom_name = dev->used_by_domname;
>  }
>  
>  void virPCIDeviceReattachInit(virPCIDevicePtr pci)
> diff --git a/src/util/virpci.h b/src/util/virpci.h
> index ac6dae1..20ffe54 100644
> --- a/src/util/virpci.h
> +++ b/src/util/virpci.h
> @@ -66,9 +66,12 @@ int virPCIDeviceSetStubDriver(virPCIDevicePtr dev,
>                                const char *driver)
>      ATTRIBUTE_NONNULL(2);
>  const char *virPCIDeviceGetStubDriver(virPCIDevicePtr dev);
> -void virPCIDeviceSetUsedBy(virPCIDevice *dev,
> -                           const char *used_by);
> -const char *virPCIDeviceGetUsedBy(virPCIDevice *dev);
> +int virPCIDeviceSetUsedBy(virPCIDevice *dev,
> +                          const char *drv_name,
> +                          const char *dom_name);
> +void virPCIDeviceGetUsedBy(virPCIDevice *dev,
> +                           const char **drv_name,
> +                           const char **dom_name);
>  unsigned int virPCIDeviceGetUnbindFromStub(virPCIDevicePtr dev);
>  void  virPCIDeviceSetUnbindFromStub(virPCIDevice *dev,
>                                      bool unbind);
> diff --git a/src/util/virscsi.c b/src/util/virscsi.c
> index acc3815..5e28328 100644
> --- a/src/util/virscsi.c
> +++ b/src/util/virscsi.c
> @@ -47,6 +47,11 @@
>  
>  /* For virReportOOMError()  and virReportSystemError() */
>  #define VIR_FROM_THIS VIR_FROM_NONE
> +struct _virUsedByInfo {
> +    char *drvname; /* which driver */
> +    char *domname; /* which domain */
> +};
> +typedef struct _virUsedByInfo *virUsedByInfoPtr;
>  
>  struct _virSCSIDevice {
>      unsigned int adapter;
> @@ -57,7 +62,7 @@ struct _virSCSIDevice {
>      char *name; /* adapter:bus:target:unit */
>      char *id;   /* model:vendor */
>      char *sg_path; /* e.g. /dev/sg2 */
> -    char **used_by; /* name of the domains using this dev */
> +    virUsedByInfoPtr *used_by; /* driver:domain(s) using this dev */
>      size_t n_used_by; /* how many domains are using this dev */
>  
>      bool readonly;
> @@ -274,19 +279,26 @@ virSCSIDeviceFree(virSCSIDevicePtr dev)
>      VIR_FREE(dev->id);
>      VIR_FREE(dev->name);
>      VIR_FREE(dev->sg_path);
> -    for (i = 0; i < dev->n_used_by; i++)
> +    for (i = 0; i < dev->n_used_by; i++) {
> +        VIR_FREE(dev->used_by[i]->drvname);
> +        VIR_FREE(dev->used_by[i]->domname);
>          VIR_FREE(dev->used_by[i]);
> +    }
>      VIR_FREE(dev->used_by);
>      VIR_FREE(dev);
>  }
>  
>  int
>  virSCSIDeviceSetUsedBy(virSCSIDevicePtr dev,
> -                       const char *name)
> +                       const char *drvname,
> +                       const char *domname)
>  {
> -    char *copy = NULL;
> -
> -    if (VIR_STRDUP(copy, name) < 0)
> +    virUsedByInfoPtr copy;
> +    if (VIR_ALLOC(copy) < 0)
> +        return -1;
> +    if (VIR_STRDUP(copy->drvname, drvname) < 0)
> +        return -1;
> +    if (VIR_STRDUP(copy->domname, domname) < 0)
>          return -1;
>  
>      return VIR_APPEND_ELEMENT(dev->used_by, dev->n_used_by, copy);
> @@ -427,13 +439,15 @@ virSCSIDeviceListSteal(virSCSIDeviceListPtr list,
>  void
>  virSCSIDeviceListDel(virSCSIDeviceListPtr list,
>                       virSCSIDevicePtr dev,
> -                     const char *name)
> +                     const char *drvname,
> +                     const char *domname)
>  {
>      virSCSIDevicePtr tmp = NULL;
>      size_t i;
>  
>      for (i = 0; i < dev->n_used_by; i++) {
> -        if (STREQ_NULLABLE(dev->used_by[i], name)) {
> +        if (STREQ_NULLABLE(dev->used_by[i]->drvname, drvname) &&
> +            STREQ_NULLABLE(dev->used_by[i]->domname, domname)) {
>              if (dev->n_used_by > 1) {
>                  VIR_DELETE_ELEMENT(dev->used_by, i, dev->n_used_by);

I'ld say that doesn't free everything. You'll need to VIR_FREE the
dev->drvname and dev->domname before.

>              } else {
> diff --git a/src/util/virscsi.h b/src/util/virscsi.h
> index 1b685eb..c67837f 100644
> --- a/src/util/virscsi.h
> +++ b/src/util/virscsi.h
> @@ -53,7 +53,9 @@ virSCSIDevicePtr virSCSIDeviceNew(const char *sysfs_prefix,
>                                    bool shareable);
>  
>  void virSCSIDeviceFree(virSCSIDevicePtr dev);
> -int virSCSIDeviceSetUsedBy(virSCSIDevicePtr dev, const char *name);
> +int virSCSIDeviceSetUsedBy(virSCSIDevicePtr dev,
> +                           const char *drvname,
> +                           const char *domname);
>  bool virSCSIDeviceIsAvailable(virSCSIDevicePtr dev);
>  const char *virSCSIDeviceGetName(virSCSIDevicePtr dev);
>  unsigned int virSCSIDeviceGetAdapter(virSCSIDevicePtr dev);
> @@ -87,7 +89,8 @@ virSCSIDevicePtr virSCSIDeviceListSteal(virSCSIDeviceListPtr list,
>                                          virSCSIDevicePtr dev);
>  void virSCSIDeviceListDel(virSCSIDeviceListPtr list,
>                            virSCSIDevicePtr dev,
> -                          const char *name);
> +                          const char *drvname,
> +                          const char *domname);
>  virSCSIDevicePtr virSCSIDeviceListFind(virSCSIDeviceListPtr list,
>                                         virSCSIDevicePtr dev);
>  
> diff --git a/src/util/virusb.c b/src/util/virusb.c
> index bb5980d..4e22973 100644
> --- a/src/util/virusb.c
> +++ b/src/util/virusb.c
> @@ -55,7 +55,10 @@ struct _virUSBDevice {
>      char          name[USB_ADDR_LEN]; /* domain:bus:slot.function */
>      char          id[USB_ID_LEN];     /* product vendor */
>      char          *path;
> -    const char    *used_by;           /* name of the domain using this dev */
> +
> +    /* driver:domain using this dev */
> +    char          *used_by_drvname;
> +    char          *used_by_domname;
>  };

Again, why changing from const char* to char*? It will mostly lead to
memory handling troubles.

>  struct _virUSBDeviceList {
> @@ -375,19 +378,31 @@ virUSBDeviceFree(virUSBDevicePtr dev)
>          return;
>      VIR_DEBUG("%s %s: freeing", dev->id, dev->name);
>      VIR_FREE(dev->path);
> +    VIR_FREE(dev->used_by_drvname);
> +    VIR_FREE(dev->used_by_domname);
>      VIR_FREE(dev);
>  }
>  
> -
> -void virUSBDeviceSetUsedBy(virUSBDevicePtr dev,
> -                           const char *name)
> +int
> +virUSBDeviceSetUsedBy(virUSBDevicePtr dev,
> +                      const char *drv_name,
> +                      const char *dom_name)
>  {
> -    dev->used_by = name;
> +    if (VIR_STRDUP(dev->used_by_drvname, drv_name) < 0)
> +        return -1;
> +    if (VIR_STRDUP(dev->used_by_domname, dom_name) < 0)
> +        return -1;

What if there was already values set? There would be a memory leak:
either use const char* or VIR_FREE before the VIR_STRDUP.

> +
> +    return 0;
>  }
>  
> -const char * virUSBDeviceGetUsedBy(virUSBDevicePtr dev)
> +void
> +virUSBDeviceGetUsedBy(virUSBDevicePtr dev,
> +                      const char **drv_name,
> +                      const char **dom_name)
>  {
> -    return dev->used_by;
> +    *drv_name = dev->used_by_drvname;
> +    *dom_name = dev->used_by_domname;
>  }
>  
>  const char *virUSBDeviceGetName(virUSBDevicePtr dev)
> diff --git a/src/util/virusb.h b/src/util/virusb.h
> index e0a7c4c..f98ea21 100644
> --- a/src/util/virusb.h
> +++ b/src/util/virusb.h
> @@ -60,8 +60,12 @@ int virUSBDeviceFind(unsigned int vendor,
>                       virUSBDevicePtr *usb);
>  
>  void virUSBDeviceFree(virUSBDevicePtr dev);
> -void virUSBDeviceSetUsedBy(virUSBDevicePtr dev, const char *name);
> -const char *virUSBDeviceGetUsedBy(virUSBDevicePtr dev);
> +int virUSBDeviceSetUsedBy(virUSBDevicePtr dev,
> +                          const char *drv_name,
> +                          const char *dom_name);
> +void virUSBDeviceGetUsedBy(virUSBDevicePtr dev,
> +                           const char **drv_name,
> +                           const char **dom_name);
>  const char *virUSBDeviceGetName(virUSBDevicePtr dev);
>  
>  unsigned int virUSBDeviceGetBus(virUSBDevicePtr dev);
> diff --git a/tests/virscsitest.c b/tests/virscsitest.c
> index d4b3e4a..586c41b 100644
> --- a/tests/virscsitest.c
> +++ b/tests/virscsitest.c
> @@ -91,13 +91,13 @@ test2(const void *data ATTRIBUTE_UNUSED)
>      if (!virSCSIDeviceIsAvailable(dev))
>          goto cleanup;
>  
> -    if (virSCSIDeviceSetUsedBy(dev, "fc18") < 0)
> +    if (virSCSIDeviceSetUsedBy(dev, "QEMU", "fc18") < 0)
>          goto cleanup;
>  
>      if (virSCSIDeviceIsAvailable(dev))
>          goto cleanup;
>  
> -    if (virSCSIDeviceSetUsedBy(dev, "fc20") < 0)
> +    if (virSCSIDeviceSetUsedBy(dev, "QEMU", "fc20") < 0)
>          goto cleanup;
>  
>      if (virSCSIDeviceIsAvailable(dev))
> @@ -117,7 +117,7 @@ test2(const void *data ATTRIBUTE_UNUSED)
>      if (!virSCSIDeviceListFind(list, dev))
>          goto cleanup;
>  
> -    virSCSIDeviceListDel(list, dev, "fc20");
> +    virSCSIDeviceListDel(list, dev, "QEMU", "fc20");
>  
>      if (!virSCSIDeviceListFind(list, dev))
>          goto cleanup;

May be some tests with the "LXC" value couldn't harm.

--
Cedric

--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list




[Index of Archives]     [Virt Tools]     [Libvirt Users]     [Lib OS Info]     [Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]     [Fedora Tools]