[PATCH] qemu: use "ide" as device name for implicit SATA controller on Q35

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This resolves https://bugzilla.redhat.com/show_bug.cgi?id=1008903

The Q35 machinetype has an implicit SATA controller at 00:1F.2 which
isn't given the "expected" id of ahci0 by qemu when it's created. The
original suggested solution to this problem was to not specify any
controller for the disks that use the default controller and just
specify "unit=n" instead; qemu should then use the first ide or sata
controller for the disk.

Unfortunately, this "solution" is ignorant of the fact that in the
case of SATA disks, the "unit" attribute in the disk XML is actually
*not* being used for the unit, but is instead used to specify the
"bus" number; each SATA controller has 6 buses, and each bus only
allows a single unit. This makes it nonsensical to specify unit='n'
where n is anything other than 0. It also means that the only way to
connect more than a single device to the implicit SATA controller is
to explicitly give the bus names, which happen to be "ide.$n", where
$n can be replaced by the disk's "unit" number.
---
 src/qemu/qemu_command.c                                | 15 ++++++---------
 tests/qemuxml2argvdata/qemuxml2argv-pcihole64-q35.args |  2 +-
 tests/qemuxml2argvdata/qemuxml2argv-q35.args           |  2 +-
 3 files changed, 8 insertions(+), 11 deletions(-)

diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
index 4628dac..e6239c9 100644
--- a/src/qemu/qemu_command.c
+++ b/src/qemu/qemu_command.c
@@ -4383,18 +4383,15 @@ qemuBuildDriveDevStr(virDomainDefPtr def,
         if (qemuDomainMachineIsQ35(def) &&
             disk->info.addr.drive.controller == 0) {
             /* Q35 machines have an implicit ahci (sata) controller at
-             * 00:1F.2 which has no "id" associated with it. For this
-             * reason, we can't refer to it as "ahci0". Instead, we
-             * don't give an id, which qemu interprets as "use the
-             * first ahci controller". We then need to specify the
-             * unit with "unit=%d" rather than adding it onto the bus
-             * arg.
+             * 00:1F.2 which for some reason is hardcoded with the id
+             * "ide" instead of the seemingly more reasonable "ahci0"
+             * or "sata0".
              */
-            virBufferAsprintf(&opt, ",unit=%d", disk->info.addr.drive.unit);
+            virBufferAsprintf(&opt, ",bus=ide.%d", disk->info.addr.drive.unit);
         } else {
             /* All other ahci controllers have been created by
-             * libvirt, so they *do* have an id, and we can identify
-             * them that way.
+             * libvirt, and we gave them the id "ahci${n}" where ${n}
+             * is the controller number. So we identify them that way.
              */
             virBufferAsprintf(&opt, ",bus=ahci%d.%d",
                               disk->info.addr.drive.controller,
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-pcihole64-q35.args b/tests/qemuxml2argvdata/qemuxml2argv-pcihole64-q35.args
index e10ccb1..175c0dc 100644
--- a/tests/qemuxml2argvdata/qemuxml2argv-pcihole64-q35.args
+++ b/tests/qemuxml2argvdata/qemuxml2argv-pcihole64-q35.args
@@ -5,5 +5,5 @@ LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test QEMU_AUDIO_DRV=none \
 -device i82801b11-bridge,id=pci.1,bus=pcie.0,addr=0x2 \
 -device pci-bridge,chassis_nr=2,id=pci.2,bus=pci.1,addr=0x1 \
 -drive file=/dev/HostVG/QEMUGuest1,if=none,id=drive-sata0-0-0 \
--device ide-drive,unit=0,drive=drive-sata0-0-0,id=sata0-0-0 \
+-device ide-drive,bus=ide.0,drive=drive-sata0-0-0,id=sata0-0-0 \
 -vga qxl -global qxl.ram_size=67108864 -global qxl.vram_size=18874368
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-q35.args b/tests/qemuxml2argvdata/qemuxml2argv-q35.args
index 4461eba..6bd5f4c 100644
--- a/tests/qemuxml2argvdata/qemuxml2argv-q35.args
+++ b/tests/qemuxml2argvdata/qemuxml2argv-q35.args
@@ -4,5 +4,5 @@ LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test QEMU_AUDIO_DRV=none \
 -device i82801b11-bridge,id=pci.1,bus=pcie.0,addr=0x2 \
 -device pci-bridge,chassis_nr=2,id=pci.2,bus=pci.1,addr=0x1 \
 -drive file=/dev/HostVG/QEMUGuest1,if=none,id=drive-sata0-0-0 \
--device ide-drive,unit=0,drive=drive-sata0-0-0,id=sata0-0-0 \
+-device ide-drive,bus=ide.0,drive=drive-sata0-0-0,id=sata0-0-0 \
 -vga qxl -global qxl.ram_size=67108864 -global qxl.vram_size=18874368
-- 
1.8.3.1

--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list




[Index of Archives]     [Virt Tools]     [Libvirt Users]     [Lib OS Info]     [Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]     [Fedora Tools]