Re: [PATCH 05/15] Forward Mode Hostdev network driver Implementation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/10/2012 12:24 PM, Shradha Shah wrote:
> This patch updates the network driver to properly utilize the new
> attributes/elements that are now in virNetworkDef

Some minor nits, nothing major, but still needs one more iteration.

I'll try to look at the hostdev-hybrid patches in the morning...

>
> Signed-off-by: Shradha Shah <sshah@xxxxxxxxxxxxxx>
> ---
>  docs/formatnetwork.html.in  |   62 +++++++++++
>  src/network/bridge_driver.c |  237 ++++++++++++++++++++++++++++++++++--------
>  2 files changed, 254 insertions(+), 45 deletions(-)
>
> diff --git a/docs/formatnetwork.html.in b/docs/formatnetwork.html.in
> index 7e8e991..96b9eb2 100644
> --- a/docs/formatnetwork.html.in
> +++ b/docs/formatnetwork.html.in
> @@ -210,6 +210,37 @@
>              (usually either a domain start, or a hotplug interface
>              attach to a domain).<span class="since">Since 0.9.4</span>
>            </dd>
> +          <dt><code>hostdev</code></dt>
> +          <dd>
> +            This network facilitates PCI Passthrough of a network device.
> +            A network device is chosen from the interface pool and 
> +            directly assigned to the guest using generic device
> +            passthrough, after first optionally setting the device's MAC
> +            address to the configured value, and associating the device with

You should probably say "optionally associating" here too, to make sure
nobody misunderstands and thinks the 802.1Qbh part is mandatory.


> +            an 802.1Qbh capable switch using an optionally specified 
> +            <code>&lt;virtualport&gt;</code> element. 
> +            Note that - due to limitations in standard single-port PCI 
> +            ethernet card driver design - only SR-IOV (Single Root I/O 
> +            Virtualization) virtual function (VF) devices can be assigned 
> +            in this manner; to assign a standard single-port PCI or PCIe 
> +            ethernet card to a guest, use the traditional <code>&lt;
> +            hostdev&gt;</code> device definition and <span class="since">

s/definition and/definition./

> +            Since 0.9.12</span>

All of the 0.9.12's need to be changed to 0.10.0.

> +
> +            <p>Note that this "intelligent passthrough" of network devices is
> +            very similar to the functionality of a standard <code>&lt;
> +            hostdev&gt;</code> device, the difference being that this 
> +            method allows specifying a MAC address and <code>&lt;virtualport
> +            &gt;</code> for the passed-through device. If these capabilities 
> +            are not required, if you have a standard single-port PCI, PCIe, 
> +            or USB network card that doesn't support SR-IOV (and hence would 
> +            anyway lose the configured MAC address during reset after being 
> +            assigned to the guest domain), or if you are using a version of 
> +            libvirt older than 0.9.12, you should use standard 

s/use/use a/

> +            <code>&lt;hostdev&gt;</code> to assign the device to the

s/to assign/definition to assign/

> +            guest instead of <code>&lt;forward mode='hostdev'/&gt;</code>.
> +            </p>
> +          </dd>
>          </dl>
>          As mentioned above, a <code>&lt;forward&gt;</code> element can
>          have multiple <code>&lt;interface&gt;</code> subelements, each
> @@ -249,6 +280,37 @@
>          particular, 'passthrough' mode, and 'private' mode when using
>          802.1Qbh), libvirt will choose an unused physical interface
>          or, if it can't find an unused interface, fail the operation.</p>
> +
> +        <span class="since">since 0.9.12</span> and when using forward mode 
> +        'hostdev' we specify the interface pool by using the 
> +        <code>&lt;address&gt;</code> element and <code>&lt;
> +        type&gt;</code> <code>&lt;domain&gt;</code> <code>&lt;bus&gt;</code>
> +        <code>&lt;slot&gt;</code> and <code>&lt;function&gt;</code>
> +        sub-elements.
> +
> +        <pre>
> +...
> +  &lt;forward mode='hostdev' managed='yes'&gt;
> +    &lt;address type='pci' domain='0' bus='4' slot='0' function='1'/&gt;
> +    &lt;address type='pci' domain='0' bus='4' slot='0' function='2'/&gt;
> +    &lt;address type='pci' domain='0' bus='4' slot='0' function='3'/&gt;
> +  &lt;/forward&gt; 
> +...
> +        </pre>
> +        
> +        Alternatively the interface pool can also be mentioned using a

s/mentioned/defined/

> +        single physical function  <code>&lt;pf&gt;</code> subelement to 
> +        call out the  corresponding physical interface associated with 
> +        multiple virtual interfaces (similar to the passthrough mode):

s/the passthrough/passthrough/

> +
> +        <pre>
> +...
> +  &lt;forward mode='hostdev' managed='yes'&gt;
> +    &lt;pf dev='eth0'/&gt;
> +  &lt;/forward&gt;
> +...
> +        </pre>
> +
>        </dd>
>      </dl>
>      <h5><a name="elementQoS">Quality of service</a></h5>
> diff --git a/src/network/bridge_driver.c b/src/network/bridge_driver.c
> index 602e17d..33bc09e 100644
> --- a/src/network/bridge_driver.c
> +++ b/src/network/bridge_driver.c
> @@ -1934,7 +1934,7 @@ networkStartNetworkExternal(struct network_driver *driver ATTRIBUTE_UNUSED,
>                              virNetworkObjPtr network ATTRIBUTE_UNUSED)
>  {
>      /* put anything here that needs to be done each time a network of
> -     * type BRIDGE, PRIVATE, VEPA, or PASSTHROUGH is started. On
> +     * type BRIDGE, PRIVATE, VEPA, HOSTDEV or PASSTHROUGH is started. On
>       * failure, undo anything you've done, and return -1. On success
>       * return 0.
>       */
> @@ -1945,7 +1945,7 @@ static int networkShutdownNetworkExternal(struct network_driver *driver ATTRIBUT
>                                          virNetworkObjPtr network ATTRIBUTE_UNUSED)
>  {
>      /* put anything here that needs to be done each time a network of
> -     * type BRIDGE, PRIVATE, VEPA, or PASSTHROUGH is shutdown. On
> +     * type BRIDGE, PRIVATE, VEPA, HOSTDEV or PASSTHROUGH is shutdown. On
>       * failure, undo anything you've done, and return -1. On success
>       * return 0.
>       */
> @@ -1976,6 +1976,7 @@ networkStartNetwork(struct network_driver *driver,
>      case VIR_NETWORK_FORWARD_PRIVATE:
>      case VIR_NETWORK_FORWARD_VEPA:
>      case VIR_NETWORK_FORWARD_PASSTHROUGH:
> +    case VIR_NETWORK_FORWARD_HOSTDEV:
>          ret = networkStartNetworkExternal(driver, network);
>          break;
>      }
> @@ -2035,6 +2036,7 @@ static int networkShutdownNetwork(struct network_driver *driver,
>      case VIR_NETWORK_FORWARD_PRIVATE:
>      case VIR_NETWORK_FORWARD_VEPA:
>      case VIR_NETWORK_FORWARD_PASSTHROUGH:
> +    case VIR_NETWORK_FORWARD_HOSTDEV:
>          ret = networkShutdownNetworkExternal(driver, network);
>          break;
>      }
> @@ -2778,7 +2780,7 @@ networkCreateInterfacePool(virNetworkDefPtr netdef) {
>                  goto finish;
>              }
>          }
> -        else if (netdef->forwardType == VIR_NETWORK_FORWARD_HOSTDEV) {
> +        if (netdef->forwardType == VIR_NETWORK_FORWARD_HOSTDEV) {
>              netdef->forwardIfs[ii].type = VIR_NETWORK_FORWARD_HOSTDEV_DEVICE_PCI; /*Assuming PCI as VF's are PCI devices */
>              netdef->forwardIfs[ii].device.pci.domain = virt_fns[ii]->domain;
>              netdef->forwardIfs[ii].device.pci.bus = virt_fns[ii]->bus;
> @@ -2817,6 +2819,8 @@ networkAllocateActualDevice(virDomainNetDefPtr iface)
>      virNetworkObjPtr network;
>      virNetworkDefPtr netdef;
>      virPortGroupDefPtr portgroup;
> +    virNetDevVPortProfilePtr virtport = NULL;
> +    virNetworkForwardIfDefPtr dev = NULL;
>      int ii;
>      int ret = -1;
>  
> @@ -2869,6 +2873,7 @@ networkAllocateActualDevice(virDomainNetDefPtr iface)
>          */
>          if (iface->data.network.actual)
>              iface->data.network.actual->type = VIR_DOMAIN_NET_TYPE_NETWORK;
> +    

Extraneous whitespace change ^^^

>      } else if ((netdef->forwardType == VIR_NETWORK_FORWARD_BRIDGE) &&
>                 netdef->bridge) {
>  
> @@ -2889,11 +2894,74 @@ networkAllocateActualDevice(virDomainNetDefPtr iface)
>              goto cleanup;
>          }
>  
> +    } else if (netdef->forwardType == VIR_NETWORK_FORWARD_HOSTDEV) {
> +        if (!iface->data.network.actual
> +            && (VIR_ALLOC(iface->data.network.actual) < 0)) {
> +            virReportOOMError();
> +            goto cleanup;
> +        }
> +        
> +        iface->data.network.actual->type = VIR_DOMAIN_NET_TYPE_HOSTDEV;
> +        if ((netdef->nForwardPfs > 0) && (netdef->nForwardIfs <= 0)) {
> +            if(networkCreateInterfacePool(netdef) < 0) {
> +                virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
> +                               _("Could not create Interface Pool from PF"));


networkCreateInterfacePool() logs its own error. Don't log another one.


> +                goto cleanup;
> +            }
> +        }
> +        /* pick first dev with 0 usageCount */
> +        
> +        for (ii = 0; ii < netdef->nForwardIfs; ii++) {
> +            if (netdef->forwardIfs[ii].usageCount == 0) {
> +                dev = &netdef->forwardIfs[ii];
> +                break;
> +            }
> +        }
> +        if (!dev) {
> +            virReportError(VIR_ERR_INTERNAL_ERROR,
> +                           _("network '%s' requires exclusive access to interfaces, but none are available"),
> +                           netdef->name);
> +            goto cleanup;
> +        }
> +        iface->data.network.actual->data.hostdev.def.parent.type = VIR_DOMAIN_DEVICE_NET;
> +        iface->data.network.actual->data.hostdev.def.parent.data.net = iface;
> +        iface->data.network.actual->data.hostdev.def.info = &iface->info;
> +        iface->data.network.actual->data.hostdev.def.mode = VIR_DOMAIN_HOSTDEV_MODE_SUBSYS;
> +        iface->data.network.actual->data.hostdev.def.managed = netdef->managed;
> +        iface->data.network.actual->data.hostdev.def.source.subsys.type = dev->type;
> +        iface->data.network.actual->data.hostdev.def.source.subsys.u.pci = dev->device.pci;
> +
> +        if (iface->data.network.virtPortProfile) {
> +            virtport = iface->data.network.virtPortProfile;
> +        } else {
> +            if (portgroup)
> +                virtport = portgroup->virtPortProfile;
> +            else
> +                virtport = netdef->virtPortProfile;
> +        }
> +        if (virtport) {
> +            if (VIR_ALLOC(iface->data.network.actual->data.hostdev.virtPortProfile) < 0) {
> +                virReportOOMError();
> +                goto cleanup;
> +            }
> +            /* There are no pointers in a virtualPortProfile, so a shallow copy
> +             * is sufficient
> +             */
> +            *iface->data.network.actual->data.direct.virtPortProfile = *virtport;
> +        }

All the above code will need to be removed when my virtualport merging
patch is pushed - it's all handled in common code now.

> +
> +        dev->usageCount++;
> +        VIR_DEBUG("Using physical device with domain=%d bus=%d slot=%d function=%d, usageCount %d",
> +                  dev->device.pci.domain,
> +                  dev->device.pci.bus,
> +                  dev->device.pci.slot,
> +                  dev->device.pci.function,
> +                  dev->usageCount);

You could combine some of those args to save lines...

> +        
>      } else if ((netdef->forwardType == VIR_NETWORK_FORWARD_BRIDGE) ||
>                 (netdef->forwardType == VIR_NETWORK_FORWARD_PRIVATE) ||
>                 (netdef->forwardType == VIR_NETWORK_FORWARD_VEPA) ||
>                 (netdef->forwardType == VIR_NETWORK_FORWARD_PASSTHROUGH)) {
> -        virNetDevVPortProfilePtr virtport = NULL;
>  
>          /* <forward type='bridge|private|vepa|passthrough'> are all
>           * VIR_DOMAIN_NET_TYPE_DIRECT.
> @@ -2952,7 +3020,6 @@ networkAllocateActualDevice(virDomainNetDefPtr iface)
>                             netdef->name);
>              goto cleanup;
>          } else {
> -            virNetworkForwardIfDefPtr dev = NULL;
>  
>              /* pick an interface from the pool */
>  
> @@ -3045,14 +3112,16 @@ networkNotifyActualDevice(virDomainNetDefPtr iface)
>      struct network_driver *driver = driverState;
>      virNetworkObjPtr network;
>      virNetworkDefPtr netdef;
> -    const char *actualDev;
> +    const char *actualDev = NULL;
> +    virDomainHostdevDefPtr def = NULL;
>      int ret = -1;
>  
>      if (iface->type != VIR_DOMAIN_NET_TYPE_NETWORK)
>         return 0;
>  
>      if (!iface->data.network.actual ||
> -        (virDomainNetGetActualType(iface) != VIR_DOMAIN_NET_TYPE_DIRECT)) {
> +        ((virDomainNetGetActualType(iface) != VIR_DOMAIN_NET_TYPE_DIRECT) &&
> +         (virDomainNetGetActualType(iface) != VIR_DOMAIN_NET_TYPE_HOSTDEV))) {
>          VIR_DEBUG("Nothing to claim from network %s", iface->data.network.name);
>          return 0;
>      }
> @@ -3067,19 +3136,28 @@ networkNotifyActualDevice(virDomainNetDefPtr iface)
>          goto cleanup;
>      }
>  
> -    actualDev = virDomainNetGetActualDirectDev(iface);
> -    if (!actualDev) {
> -        virReportError(VIR_ERR_INTERNAL_ERROR,
> -                       "%s", _("the interface uses a direct "
> -                               "mode, but has no source dev"));
> -        goto cleanup;
> +    if (virDomainNetGetActualType(iface) == VIR_DOMAIN_NET_TYPE_DIRECT) {
> +        actualDev = virDomainNetGetActualDirectDev(iface);
> +        if (!actualDev) {
> +            virReportError(VIR_ERR_INTERNAL_ERROR,
> +                           "%s", _("the interface uses a direct mode, but has no source dev"));
> +            goto cleanup;
> +        }
> +    }

   ... else ...
> +    
> +    if (virDomainNetGetActualType(iface) == VIR_DOMAIN_NET_TYPE_HOSTDEV) {
> +        def = virDomainNetGetActualHostdev(iface);
> +        if (!def) {
> +            virReportError(VIR_ERR_INTERNAL_ERROR,
> +                           "%s", _("the interface uses a hostdev mode, but has no hostdev"));
> +            goto cleanup;
> +        }
>      }
>  
>      netdef = network->def;
> -    if (netdef->nForwardIfs == 0) {
> +    if ((netdef->nForwardIfs == 0) && (netdef->nForwardPfs == 0)) {
>          virReportError(VIR_ERR_INTERNAL_ERROR,
> -                       _("network '%s' uses a direct mode, but "
> -                         "has no forward dev and no interface pool"),
> +                       _("network '%s' uses a direct/hostdev mode, but has no forward dev and no interface pool"),
>                         netdef->name);
>          goto cleanup;
>      } else {
> @@ -3087,27 +3165,49 @@ networkNotifyActualDevice(virDomainNetDefPtr iface)
>          virNetworkForwardIfDefPtr dev = NULL;
>  
>          /* find the matching interface in the pool and increment its usageCount */
> +        if (virDomainNetGetActualType(iface) == VIR_DOMAIN_NET_TYPE_DIRECT) {
> +            for (ii = 0; ii < netdef->nForwardIfs; ii++) {
> +                if (STREQ(actualDev, netdef->forwardIfs[ii].device.dev)) {
> +                    dev = &netdef->forwardIfs[ii];
> +                    break;
> +                }
> +            }
> +        }
>  
> -        for (ii = 0; ii < netdef->nForwardIfs; ii++) {
> -            if (STREQ(actualDev, netdef->forwardIfs[ii].device.dev)) {
> -                dev = &netdef->forwardIfs[ii];
> -                break;

again "... else ..."


> +        if (virDomainNetGetActualType(iface) == VIR_DOMAIN_NET_TYPE_HOSTDEV) {
> +            if ((netdef->nForwardPfs > 0) && (netdef->nForwardIfs <= 0)) {
> +                if(networkCreateInterfacePool(netdef) < 0) {
> +                    virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
> +                                   _("Could not create Interface Pool from PF"));
> +                    goto cleanup;
> +                }
> +            }
> +            for (ii = 0; ii < netdef->nForwardIfs; ii++) {
> +                if((def->source.subsys.u.pci.domain == netdef->forwardIfs[ii].device.pci.domain) &&
> +                   (def->source.subsys.u.pci.bus == netdef->forwardIfs[ii].device.pci.bus) &&
> +                   (def->source.subsys.u.pci.slot == netdef->forwardIfs[ii].device.pci.slot) &&
> +                   (def->source.subsys.u.pci.function == netdef->forwardIfs[ii].device.pci.function)) {

Isn't there a virDevicePCIAddressEqual() function?

> +                    dev = &netdef->forwardIfs[ii];
> +                    break;
> +                }
>              }
>          }
> +
>          /* dev points at the physical device we want to use */
>          if (!dev) {
>              virReportError(VIR_ERR_INTERNAL_ERROR,
> -                           _("network '%s' doesn't have dev='%s' in use by domain"),
> -                           netdef->name, actualDev);
> +                           _("network '%s' doesn't have dev in use by domain"),
> +                           netdef->name);


It would probably be very useful to print the netdev name if we were
looking for a netdev, and print out the PCI device info if we were
looking for a PCI device.


>              goto cleanup;
>          }
>  
> -        /* PASSTHROUGH mode, and PRIVATE Mode + 802.1Qbh both require
> +        /* PASSTHROUGH mode, HOSTDEV mode and PRIVATE Mode + 802.1Qbh both require
>           * exclusive access to a device, so current usageCount must be
>           * 0 in those cases.
>           */
>          if ((dev->usageCount > 0) &&
>              ((netdef->forwardType == VIR_NETWORK_FORWARD_PASSTHROUGH) ||
> +             (netdef->forwardType == VIR_NETWORK_FORWARD_HOSTDEV) || 
>               ((netdef->forwardType == VIR_NETWORK_FORWARD_PRIVATE) &&
>                iface->data.network.actual->data.direct.virtPortProfile &&
>                (iface->data.network.actual->data.direct.virtPortProfile->virtPortType
> @@ -3119,8 +3219,18 @@ networkNotifyActualDevice(virDomainNetDefPtr iface)
>          }
>          /* we are now assured of success, so mark the allocation */
>          dev->usageCount++;
> -        VIR_DEBUG("Using physical device %s, usageCount %d",
> -                  dev->device.dev, dev->usageCount);
> +        if (virDomainNetGetActualType(iface) == VIR_DOMAIN_NET_TYPE_DIRECT) {
> +            VIR_DEBUG("Using physical device %s, usageCount %d",
> +                      dev->device.dev, dev->usageCount);
> +        }
   ... else ...
> +        if (virDomainNetGetActualType(iface) == VIR_DOMAIN_NET_TYPE_HOSTDEV) {
> +            VIR_DEBUG("Using physical device with domain=%d bus=%d slot=%d function=%d, usageCount %d",
> +                      dev->device.pci.domain,
> +                      dev->device.pci.bus,
> +                      dev->device.pci.slot,
> +                      dev->device.pci.function,
> +                      dev->usageCount);
> +        }
>      }
>  
>      ret = 0;
> @@ -3147,14 +3257,16 @@ networkReleaseActualDevice(virDomainNetDefPtr iface)
>      struct network_driver *driver = driverState;
>      virNetworkObjPtr network = NULL;
>      virNetworkDefPtr netdef;
> -    const char *actualDev;
> +    const char *actualDev = NULL;
> +    virDomainHostdevDefPtr def = NULL;
>      int ret = -1;
>  
>      if (iface->type != VIR_DOMAIN_NET_TYPE_NETWORK)
>         return 0;
>  
>      if (!iface->data.network.actual ||
> -        (virDomainNetGetActualType(iface) != VIR_DOMAIN_NET_TYPE_DIRECT)) {

You know, as often as you're calling virDomainNetGetActualType(iface),
maybe you should define a variable
"enum virDomainNetType actualType = virDomainNetGetActualType(iface)" at
the top of the function.

> +        ((virDomainNetGetActualType(iface) != VIR_DOMAIN_NET_TYPE_DIRECT) &&
> +         (virDomainNetGetActualType(iface) != VIR_DOMAIN_NET_TYPE_HOSTDEV))) {
>          VIR_DEBUG("Nothing to release to network %s", iface->data.network.name);
>          ret = 0;
>          goto cleanup;
> @@ -3170,44 +3282,79 @@ networkReleaseActualDevice(virDomainNetDefPtr iface)
>          goto cleanup;
>      }
>  
> -    actualDev = virDomainNetGetActualDirectDev(iface);
> -    if (!actualDev) {
> -        virReportError(VIR_ERR_INTERNAL_ERROR,
> -                       "%s", _("the interface uses a direct "
> -                               "mode, but has no source dev"));
> -        goto cleanup;
> +    if (virDomainNetGetActualType(iface) == VIR_DOMAIN_NET_TYPE_DIRECT) {
> +        actualDev = virDomainNetGetActualDirectDev(iface);
> +        if (!actualDev) {
> +            virReportError(VIR_ERR_INTERNAL_ERROR,
> +                           "%s", _("the interface uses a direct mode, but has no source dev"));
> +            goto cleanup;
> +        }
> +    }
> +    
   ... else ...

> +    if (virDomainNetGetActualType(iface) == VIR_DOMAIN_NET_TYPE_HOSTDEV) {
> +        def = virDomainNetGetActualHostdev(iface);
> +        if (!def) {
> +            virReportError(VIR_ERR_INTERNAL_ERROR,
> +                           "%s", _("the interface uses a hostdev mode, but has no hostdev"));
> +            goto cleanup;
> +        }
>      }
>  
>      netdef = network->def;
> -    if (netdef->nForwardIfs == 0) {
> +    if ((netdef->nForwardIfs == 0) && (netdef->nForwardPfs == 0)) {
>          virReportError(VIR_ERR_INTERNAL_ERROR,
> -                       _("network '%s' uses a direct mode, but "
> +                       _("network '%s' uses a direct/hostdev mode, but "
>                           "has no forward dev and no interface pool"),
>                         netdef->name);
>          goto cleanup;
>      } else {
>          int ii;
>          virNetworkForwardIfDefPtr dev = NULL;
> -
> -        for (ii = 0; ii < netdef->nForwardIfs; ii++) {
> -            if (STREQ(actualDev, netdef->forwardIfs[ii].device.dev)) {
> -                dev = &netdef->forwardIfs[ii];
> -                break;
> +        
> +        if (virDomainNetGetActualType(iface) == VIR_DOMAIN_NET_TYPE_DIRECT) {
> +            for (ii = 0; ii < netdef->nForwardIfs; ii++) {
> +                if (STREQ(actualDev, netdef->forwardIfs[ii].device.dev)) {
> +                    dev = &netdef->forwardIfs[ii];
> +                    break;
> +                }
> +            }
> +        }
> +        
   ... else ...

> +        if (virDomainNetGetActualType(iface) == VIR_DOMAIN_NET_TYPE_HOSTDEV) {
> +            for (ii = 0; ii < netdef->nForwardIfs; ii++) {
> +                if((def->source.subsys.u.pci.domain == netdef->forwardIfs[ii].device.pci.domain) &&
> +                   (def->source.subsys.u.pci.bus == netdef->forwardIfs[ii].device.pci.bus) &&
> +                   (def->source.subsys.u.pci.slot == netdef->forwardIfs[ii].device.pci.slot) &&
> +                   (def->source.subsys.u.pci.function == netdef->forwardIfs[ii].device.pci.function)) {

Again, some kind of virDevicePCIAddressEqual() function would be nice.
> +                    dev = &netdef->forwardIfs[ii];
> +                    break;
> +                }
>              }
>          }
> +       
>          /* dev points at the physical device we've been using */
>          if (!dev) {
>              virReportError(VIR_ERR_INTERNAL_ERROR,
> -                           _("network '%s' doesn't have dev='%s' in use by domain"),
> -                           netdef->name, actualDev);
> +                           _("network '%s' doesn't have dev in use by domain"),
> +                           netdef->name);
>              goto cleanup;
>          }
>  
>          dev->usageCount--;
> -        VIR_DEBUG("Releasing physical device %s, usageCount %d",
> -                  dev->device.dev, dev->usageCount);
> +        if (virDomainNetGetActualType(iface) == VIR_DOMAIN_NET_TYPE_DIRECT) {
> +            VIR_DEBUG("Releasing physical device %s, usageCount %d",
> +                      dev->device.dev, dev->usageCount);
> +        }
> +        if (virDomainNetGetActualType(iface) == VIR_DOMAIN_NET_TYPE_HOSTDEV) {
> +            VIR_DEBUG("Releasing physical device with domain=%d bus=%d slot=%d function=%d, usageCount %d",
> +                      dev->device.pci.domain,
> +                      dev->device.pci.bus,
> +                      dev->device.pci.slot,
> +                      dev->device.pci.function,
> +                      dev->usageCount);
> +        }
>      }
> -
> +        
>      ret = 0;
>  cleanup:
>      if (network)

--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list


[Index of Archives]     [Virt Tools]     [Libvirt Users]     [Lib OS Info]     [Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]     [Fedora Tools]