Re: How to avoid failure of migration/restoring/starting if cdrom is ejected inside guest?
|[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]|
On Mon, Aug 08, 2011 at 10:45:19PM +0800, Osier Yang wrote: > 于 2011年08月08日 22:04, Dave Allan 写道: > >On Mon, Aug 08, 2011 at 05:47:24PM +0800, Osier Yang wrote: > >>Hello list, > >> > >>There is problem of migration if the changedable medium is ejected > >>inside guest, this is caused by qemu closes the block driver backend > >>once the medium is ejected, but it doesn't gives a way to let > >>libvirt known the fact. So, libvirt will try to migrate the guest > >>with the media still exists. This will cause the failure, as qemu > >>already closes the block driver backend. > >> > >>Actually this could also break domain restoring and starting (if the domain > >>has a managed saving image, supposing the media is ejected before saving > >>or managed saving). > >> > >>It's ideal if qemu could provide some event so that libvirt could known the > >>media is changed immediately, but it's bad news qemu upstream won't make > >>a patch for this in a short time. > >> > >>As a alternative solution, they proposed patch to expose the status of > >>changeable medium via monitor command "info block": > >> > >>http://lists.gnu.org/archive/html/qemu-devel/2011-08/msg00408.html > >> > >>The output of the improved "info block" looks like below: > >> > >>(qemu) info block > >>disk0: removable=0 file=/home/armbru/work/images/test.qcow2 > >>backing_file=test.img ro=0 drv=qcow2 encrypted=0 > >>cd: removable=1 locked=0 ejected file=x.iso ro=1 drv=raw encrypted=0 > >> > >>What libvirt can do with the qemu improvement is checking the meduim status > >>at the time of migration, but it doesn't kill all the bugs, such as for a > >>live migration, one can eject the media inside guest just during the migration > >>process. This probally makes a race and cause the failure just the same. > >After thinking about this a bit, I believe it's not a problem. If the > >guest has the media in the drive at the start of migration, libvirt > >will require the media to be present on the destination. > > I guess you mean the migration qemu command line will contains > the media path present. If so, yes, it's true. > > > If the guest ejects the media subsequent to that check, the > >operation of the guest on the dst host will be unaffected. The > >guest will have the media available to it, but the guest is not > >required to use it. The only question I have is whether the guest > >might start on the dst with the media back in the drive, which > >would be incorrect. > > > > Sorry, I don't explain the problem clearly enough. > > If the medium is ejected inside guest, and the source of the medium > is removed or renamed. libvirt will still tries to do cgroup setting > before starting the guest on dest side, that's the real problem. As > one will think it's reasonable to remove the source if it's > ejected. And we can't prevent one remove the source during the > migration (supposing the removing is before libvirt tries to do > cgroup setting on dest host.) Agreed, but that's a problem that I don't think we can solve except by documenting the behavior. The libvirt documentation has always clearly stated that the storage configuration must be the same on the src and dst hosts. We are discussing altering that constraint here in the case of medium that has been ejected, but I think we can be clear that the constraint is not being removed and that a guest's storage configuration must not be changed while a migration is in progress. Dave > >>And moreover, this won't solve the problem on restoring and starting > >>with managed saving image, can't get the medium status as the guest > >>is not active. > >True, but I'm not sure I see an easy solution to that, and I don't > >think the lack of solution there should hold up a solution to the > >migration problem. > > > >>So, I 'm hesitating to use "info block" to resolve the problems, it > >>can't resolve the root problem thoroughly. > >> > >>Or I missed some good ideas? Any thought is welcomed, thanks. > >> > >>By the way, it might be deserving to report the cdrom tray status > >>using the improved "info block" though, though qemu might keep > >>improving the command to output more infomation, such as the media > >>is inserted, but the tray is still open (which means different if we > >>report the tray status as "close" if "info block" outputs > >>"inserted", need to change the codes then)? > >IMO, qemu should expose, and we should report to the user 4 states: > > > >1) tray closed, media inserted > >2) tray open, media inserted > >3) tray closed, media removed > >4) tray open, media removed > > > >The API for inserting and removing media should be different from > >opening and closing the drive. > > Agee on this, we need to wait the qemu side tray about patches in > first. > > >Dave > > > >>Patches of qemu side to improve the tray handling: > >> > >>http://lists.nongnu.org/archive/html/qemu-devel/2011-06/msg00381.html > >> > >>Regards > >>Osier > >> > >>-- > >>libvir-list mailing list > >>libvir-list@xxxxxxxxxx > >>https://www.redhat.com/mailman/listinfo/libvir-list > -- libvir-list mailing list libvir-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/libvir-list
[Virt Tools] [Libvirt Users] [Fedora Users] [Fedora Legacy] [Fedora Maintainers] [Fedora Desktop] [Fedora SELinux] [Big List of Linux Books] [Yosemite News] [Yosemite Photos] [KDE Users] [Fedora Tools]